Struct aws_sdk_sts::client::fluent_builders::GetSessionToken
source · [−]pub struct GetSessionToken { /* private fields */ }
Expand description
Fluent builder constructing a request to GetSessionToken
.
Returns a set of temporary credentials for an Amazon Web Services account or IAM user. The credentials consist of an access key ID, a secret access key, and a security token. Typically, you use GetSessionToken
if you want to use MFA to protect programmatic calls to specific Amazon Web Services API operations like Amazon EC2 StopInstances
. MFA-enabled IAM users would need to call GetSessionToken
and submit an MFA code that is associated with their MFA device. Using the temporary security credentials that are returned from the call, IAM users can then make programmatic calls to API operations that require MFA authentication. If you do not supply a correct MFA code, then the API returns an access denied error. For a comparison of GetSessionToken
with the other API operations that produce temporary credentials, see Requesting Temporary Security Credentials and Comparing the Amazon Web Services STS API operations in the IAM User Guide.
Session Duration
The GetSessionToken
operation must be called by using the long-term Amazon Web Services security credentials of the Amazon Web Services account root user or an IAM user. Credentials that are created by IAM users are valid for the duration that you specify. This duration can range from 900 seconds (15 minutes) up to a maximum of 129,600 seconds (36 hours), with a default of 43,200 seconds (12 hours). Credentials based on account credentials can range from 900 seconds (15 minutes) up to 3,600 seconds (1 hour), with a default of 1 hour.
Permissions
The temporary security credentials created by GetSessionToken
can be used to make API calls to any Amazon Web Services service with the following exceptions:
-
You cannot call any IAM API operations unless MFA authentication information is included in the request.
-
You cannot call any STS API except
AssumeRole
orGetCallerIdentity
.
We recommend that you do not call GetSessionToken
with Amazon Web Services account root user credentials. Instead, follow our best practices by creating one or more IAM users, giving them the necessary permissions, and using IAM users for everyday interaction with Amazon Web Services.
The credentials that are returned by GetSessionToken
are based on permissions associated with the user whose credentials were used to call the operation. If GetSessionToken
is called using Amazon Web Services account root user credentials, the temporary credentials have root user permissions. Similarly, if GetSessionToken
is called using the credentials of an IAM user, the temporary credentials have the same permissions as the IAM user.
For more information about using GetSessionToken
to create temporary credentials, go to Temporary Credentials for Users in Untrusted Environments in the IAM User Guide.
Implementations
sourceimpl GetSessionToken
impl GetSessionToken
sourcepub async fn send(
self
) -> Result<GetSessionTokenOutput, SdkError<GetSessionTokenError>>
pub async fn send(
self
) -> Result<GetSessionTokenOutput, SdkError<GetSessionTokenError>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn duration_seconds(self, input: i32) -> Self
pub fn duration_seconds(self, input: i32) -> Self
The duration, in seconds, that the credentials should remain valid. Acceptable durations for IAM user sessions range from 900 seconds (15 minutes) to 129,600 seconds (36 hours), with 43,200 seconds (12 hours) as the default. Sessions for Amazon Web Services account owners are restricted to a maximum of 3,600 seconds (one hour). If the duration is longer than one hour, the session for Amazon Web Services account owners defaults to one hour.
sourcepub fn set_duration_seconds(self, input: Option<i32>) -> Self
pub fn set_duration_seconds(self, input: Option<i32>) -> Self
The duration, in seconds, that the credentials should remain valid. Acceptable durations for IAM user sessions range from 900 seconds (15 minutes) to 129,600 seconds (36 hours), with 43,200 seconds (12 hours) as the default. Sessions for Amazon Web Services account owners are restricted to a maximum of 3,600 seconds (one hour). If the duration is longer than one hour, the session for Amazon Web Services account owners defaults to one hour.
sourcepub fn serial_number(self, input: impl Into<String>) -> Self
pub fn serial_number(self, input: impl Into<String>) -> Self
The identification number of the MFA device that is associated with the IAM user who is making the GetSessionToken
call. Specify this value if the IAM user has a policy that requires MFA authentication. The value is either the serial number for a hardware device (such as GAHT12345678
) or an Amazon Resource Name (ARN) for a virtual device (such as arn:aws:iam::123456789012:mfa/user
). You can find the device for an IAM user by going to the Amazon Web Services Management Console and viewing the user's security credentials.
The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@:/-
sourcepub fn set_serial_number(self, input: Option<String>) -> Self
pub fn set_serial_number(self, input: Option<String>) -> Self
The identification number of the MFA device that is associated with the IAM user who is making the GetSessionToken
call. Specify this value if the IAM user has a policy that requires MFA authentication. The value is either the serial number for a hardware device (such as GAHT12345678
) or an Amazon Resource Name (ARN) for a virtual device (such as arn:aws:iam::123456789012:mfa/user
). You can find the device for an IAM user by going to the Amazon Web Services Management Console and viewing the user's security credentials.
The regex used to validate this parameter is a string of characters consisting of upper- and lower-case alphanumeric characters with no spaces. You can also include underscores or any of the following characters: =,.@:/-
sourcepub fn token_code(self, input: impl Into<String>) -> Self
pub fn token_code(self, input: impl Into<String>) -> Self
The value provided by the MFA device, if MFA is required. If any policy requires the IAM user to submit an MFA code, specify this value. If MFA authentication is required, the user must provide a code when requesting a set of temporary security credentials. A user who fails to provide the code receives an "access denied" response when requesting resources that require MFA authentication.
The format for this parameter, as described by its regex pattern, is a sequence of six numeric digits.
sourcepub fn set_token_code(self, input: Option<String>) -> Self
pub fn set_token_code(self, input: Option<String>) -> Self
The value provided by the MFA device, if MFA is required. If any policy requires the IAM user to submit an MFA code, specify this value. If MFA authentication is required, the user must provide a code when requesting a set of temporary security credentials. A user who fails to provide the code receives an "access denied" response when requesting resources that require MFA authentication.
The format for this parameter, as described by its regex pattern, is a sequence of six numeric digits.
Trait Implementations
sourceimpl Clone for GetSessionToken
impl Clone for GetSessionToken
sourcefn clone(&self) -> GetSessionToken
fn clone(&self) -> GetSessionToken
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
Auto Trait Implementations
impl !RefUnwindSafe for GetSessionToken
impl Send for GetSessionToken
impl Sync for GetSessionToken
impl Unpin for GetSessionToken
impl !UnwindSafe for GetSessionToken
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more