Struct aws_sdk_route53domains::client::Client

pub struct Client<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

An ergonomic service client for Route53Domains_v20140515.

This client allows ergonomic access to a Route53Domains_v20140515-shaped service. Each method corresponds to an endpoint defined in the service’s Smithy model, and the request and response shapes are auto-generated from that same model.

Using a Client

Once you have a client set up, you can access the service’s endpoints by calling the appropriate method on Client. Each such method returns a request builder for that endpoint, with methods for setting the various fields of the request. Once your request is complete, use the send method to send the request. send returns a future, which you then have to .await to get the service’s response.

Implementations

impl<C, M, R> Client<C, M, R>

pub fn with_config(client: Client<C, M, R>, conf: Config) -> Self

Creates a client with the given service configuration.

pub fn conf(&self) -> &Config

Returns the client’s configuration.

impl<C, M, R> Client<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub fn accept_domain_transfer_from_another_aws_account(
    &self
) -> AcceptDomainTransferFromAnotherAwsAccount<C, M, R>

Constructs a fluent builder for the AcceptDomainTransferFromAnotherAwsAccount operation.

See AcceptDomainTransferFromAnotherAwsAccount for more information about the operation and its arguments.

pub fn cancel_domain_transfer_to_another_aws_account(
    &self
) -> CancelDomainTransferToAnotherAwsAccount<C, M, R>

Constructs a fluent builder for the CancelDomainTransferToAnotherAwsAccount operation.

See CancelDomainTransferToAnotherAwsAccount for more information about the operation and its arguments.

pub fn check_domain_availability(&self) -> CheckDomainAvailability<C, M, R>

Constructs a fluent builder for the CheckDomainAvailability operation.

See CheckDomainAvailability for more information about the operation and its arguments.

pub fn check_domain_transferability(
    &self
) -> CheckDomainTransferability<C, M, R>

Constructs a fluent builder for the CheckDomainTransferability operation.

See CheckDomainTransferability for more information about the operation and its arguments.

pub fn delete_tags_for_domain(&self) -> DeleteTagsForDomain<C, M, R>

Constructs a fluent builder for the DeleteTagsForDomain operation.

See DeleteTagsForDomain for more information about the operation and its arguments.

pub fn disable_domain_auto_renew(&self) -> DisableDomainAutoRenew<C, M, R>

Constructs a fluent builder for the DisableDomainAutoRenew operation.

See DisableDomainAutoRenew for more information about the operation and its arguments.

pub fn disable_domain_transfer_lock(&self) -> DisableDomainTransferLock<C, M, R>

Constructs a fluent builder for the DisableDomainTransferLock operation.

See DisableDomainTransferLock for more information about the operation and its arguments.

pub fn enable_domain_auto_renew(&self) -> EnableDomainAutoRenew<C, M, R>

Constructs a fluent builder for the EnableDomainAutoRenew operation.

See EnableDomainAutoRenew for more information about the operation and its arguments.

pub fn enable_domain_transfer_lock(&self) -> EnableDomainTransferLock<C, M, R>

Constructs a fluent builder for the EnableDomainTransferLock operation.

See EnableDomainTransferLock for more information about the operation and its arguments.

pub fn get_contact_reachability_status(
    &self
) -> GetContactReachabilityStatus<C, M, R>

Constructs a fluent builder for the GetContactReachabilityStatus operation.

See GetContactReachabilityStatus for more information about the operation and its arguments.

pub fn get_domain_detail(&self) -> GetDomainDetail<C, M, R>

Constructs a fluent builder for the GetDomainDetail operation.

See GetDomainDetail for more information about the operation and its arguments.

pub fn get_domain_suggestions(&self) -> GetDomainSuggestions<C, M, R>

Constructs a fluent builder for the GetDomainSuggestions operation.

See GetDomainSuggestions for more information about the operation and its arguments.

pub fn get_operation_detail(&self) -> GetOperationDetail<C, M, R>

Constructs a fluent builder for the GetOperationDetail operation.

See GetOperationDetail for more information about the operation and its arguments.

pub fn list_domains(&self) -> ListDomains<C, M, R>

Constructs a fluent builder for the ListDomains operation.

See ListDomains for more information about the operation and its arguments.

pub fn list_operations(&self) -> ListOperations<C, M, R>

Constructs a fluent builder for the ListOperations operation.

See ListOperations for more information about the operation and its arguments.

pub fn list_tags_for_domain(&self) -> ListTagsForDomain<C, M, R>

Constructs a fluent builder for the ListTagsForDomain operation.

See ListTagsForDomain for more information about the operation and its arguments.

pub fn register_domain(&self) -> RegisterDomain<C, M, R>

Constructs a fluent builder for the RegisterDomain operation.

See RegisterDomain for more information about the operation and its arguments.

pub fn reject_domain_transfer_from_another_aws_account(
    &self
) -> RejectDomainTransferFromAnotherAwsAccount<C, M, R>

Constructs a fluent builder for the RejectDomainTransferFromAnotherAwsAccount operation.

See RejectDomainTransferFromAnotherAwsAccount for more information about the operation and its arguments.

pub fn renew_domain(&self) -> RenewDomain<C, M, R>

Constructs a fluent builder for the RenewDomain operation.

See RenewDomain for more information about the operation and its arguments.

pub fn resend_contact_reachability_email(
    &self
) -> ResendContactReachabilityEmail<C, M, R>

Constructs a fluent builder for the ResendContactReachabilityEmail operation.

See ResendContactReachabilityEmail for more information about the operation and its arguments.

pub fn retrieve_domain_auth_code(&self) -> RetrieveDomainAuthCode<C, M, R>

Constructs a fluent builder for the RetrieveDomainAuthCode operation.

See RetrieveDomainAuthCode for more information about the operation and its arguments.

pub fn transfer_domain(&self) -> TransferDomain<C, M, R>

Constructs a fluent builder for the TransferDomain operation.

See TransferDomain for more information about the operation and its arguments.

pub fn transfer_domain_to_another_aws_account(
    &self
) -> TransferDomainToAnotherAwsAccount<C, M, R>

Constructs a fluent builder for the TransferDomainToAnotherAwsAccount operation.

See TransferDomainToAnotherAwsAccount for more information about the operation and its arguments.

pub fn update_domain_contact(&self) -> UpdateDomainContact<C, M, R>

Constructs a fluent builder for the UpdateDomainContact operation.

See UpdateDomainContact for more information about the operation and its arguments.

pub fn update_domain_contact_privacy(
    &self
) -> UpdateDomainContactPrivacy<C, M, R>

Constructs a fluent builder for the UpdateDomainContactPrivacy operation.

See UpdateDomainContactPrivacy for more information about the operation and its arguments.

pub fn update_domain_nameservers(&self) -> UpdateDomainNameservers<C, M, R>

Constructs a fluent builder for the UpdateDomainNameservers operation.

See UpdateDomainNameservers for more information about the operation and its arguments.

pub fn update_tags_for_domain(&self) -> UpdateTagsForDomain<C, M, R>

Constructs a fluent builder for the UpdateTagsForDomain operation.

See UpdateTagsForDomain for more information about the operation and its arguments.

pub fn view_billing(&self) -> ViewBilling<C, M, R>

Constructs a fluent builder for the ViewBilling operation.

See ViewBilling for more information about the operation and its arguments.

impl<C> Client<C, AwsMiddleware, Standard>

pub fn from_conf_conn(conf: Config, conn: C) -> Self

Creates a client with the given service config and connector override.

impl Client<DynConnector, AwsMiddleware, Standard>

pub fn new(config: &Config) -> Self

Creates a new client from a shared config.

pub fn from_conf(conf: Config) -> Self

Creates a new client from the service Config.

Trait Implementations

impl<C, M, R> Clone for Client<C, M, R>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C: Debug, M: Debug, R: Debug> Debug for Client<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<C, M, R> From<Client<C, M, R>> for Client<C, M, R>

fn from(client: Client<C, M, R>) -> Self

Performs the conversion.