Struct aws_sdk_mturk::client::fluent_builders::CreateHITWithHITType
source · [−]pub struct CreateHITWithHITType { /* private fields */ }
Expand description
Fluent builder constructing a request to CreateHITWithHITType
.
The CreateHITWithHITType
operation creates a new Human Intelligence Task (HIT) using an existing HITTypeID generated by the CreateHITType
operation.
This is an alternative way to create HITs from the CreateHIT
operation. This is the recommended best practice for Requesters who are creating large numbers of HITs.
CreateHITWithHITType also supports several ways to provide question data: by providing a value for the Question
parameter that fully specifies the contents of the HIT, or by providing a HitLayoutId
and associated HitLayoutParameters
.
If a HIT is created with 10 or more maximum assignments, there is an additional fee. For more information, see Amazon Mechanical Turk Pricing.
Implementations
sourceimpl CreateHITWithHITType
impl CreateHITWithHITType
sourcepub async fn send(
self
) -> Result<CreateHitWithHitTypeOutput, SdkError<CreateHITWithHITTypeError>>
pub async fn send(
self
) -> Result<CreateHitWithHitTypeOutput, SdkError<CreateHITWithHITTypeError>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn hit_type_id(self, input: impl Into<String>) -> Self
pub fn hit_type_id(self, input: impl Into<String>) -> Self
The HIT type ID you want to create this HIT with.
sourcepub fn set_hit_type_id(self, input: Option<String>) -> Self
pub fn set_hit_type_id(self, input: Option<String>) -> Self
The HIT type ID you want to create this HIT with.
sourcepub fn max_assignments(self, input: i32) -> Self
pub fn max_assignments(self, input: i32) -> Self
The number of times the HIT can be accepted and completed before the HIT becomes unavailable.
sourcepub fn set_max_assignments(self, input: Option<i32>) -> Self
pub fn set_max_assignments(self, input: Option<i32>) -> Self
The number of times the HIT can be accepted and completed before the HIT becomes unavailable.
sourcepub fn lifetime_in_seconds(self, input: i64) -> Self
pub fn lifetime_in_seconds(self, input: i64) -> Self
An amount of time, in seconds, after which the HIT is no longer available for users to accept. After the lifetime of the HIT elapses, the HIT no longer appears in HIT searches, even if not all of the assignments for the HIT have been accepted.
sourcepub fn set_lifetime_in_seconds(self, input: Option<i64>) -> Self
pub fn set_lifetime_in_seconds(self, input: Option<i64>) -> Self
An amount of time, in seconds, after which the HIT is no longer available for users to accept. After the lifetime of the HIT elapses, the HIT no longer appears in HIT searches, even if not all of the assignments for the HIT have been accepted.
sourcepub fn question(self, input: impl Into<String>) -> Self
pub fn question(self, input: impl Into<String>) -> Self
The data the person completing the HIT uses to produce the results.
Constraints: Must be a QuestionForm data structure, an ExternalQuestion data structure, or an HTMLQuestion data structure. The XML question data must not be larger than 64 kilobytes (65,535 bytes) in size, including whitespace.
Either a Question parameter or a HITLayoutId parameter must be provided.
sourcepub fn set_question(self, input: Option<String>) -> Self
pub fn set_question(self, input: Option<String>) -> Self
The data the person completing the HIT uses to produce the results.
Constraints: Must be a QuestionForm data structure, an ExternalQuestion data structure, or an HTMLQuestion data structure. The XML question data must not be larger than 64 kilobytes (65,535 bytes) in size, including whitespace.
Either a Question parameter or a HITLayoutId parameter must be provided.
sourcepub fn requester_annotation(self, input: impl Into<String>) -> Self
pub fn requester_annotation(self, input: impl Into<String>) -> Self
An arbitrary data field. The RequesterAnnotation parameter lets your application attach arbitrary data to the HIT for tracking purposes. For example, this parameter could be an identifier internal to the Requester's application that corresponds with the HIT.
The RequesterAnnotation parameter for a HIT is only visible to the Requester who created the HIT. It is not shown to the Worker, or any other Requester.
The RequesterAnnotation parameter may be different for each HIT you submit. It does not affect how your HITs are grouped.
sourcepub fn set_requester_annotation(self, input: Option<String>) -> Self
pub fn set_requester_annotation(self, input: Option<String>) -> Self
An arbitrary data field. The RequesterAnnotation parameter lets your application attach arbitrary data to the HIT for tracking purposes. For example, this parameter could be an identifier internal to the Requester's application that corresponds with the HIT.
The RequesterAnnotation parameter for a HIT is only visible to the Requester who created the HIT. It is not shown to the Worker, or any other Requester.
The RequesterAnnotation parameter may be different for each HIT you submit. It does not affect how your HITs are grouped.
sourcepub fn unique_request_token(self, input: impl Into<String>) -> Self
pub fn unique_request_token(self, input: impl Into<String>) -> Self
A unique identifier for this request which allows you to retry the call on error without creating duplicate HITs. This is useful in cases such as network timeouts where it is unclear whether or not the call succeeded on the server. If the HIT already exists in the system from a previous call using the same UniqueRequestToken, subsequent calls will return a AWS.MechanicalTurk.HitAlreadyExists error with a message containing the HITId.
Note: It is your responsibility to ensure uniqueness of the token. The unique token expires after 24 hours. Subsequent calls using the same UniqueRequestToken made after the 24 hour limit could create duplicate HITs.
sourcepub fn set_unique_request_token(self, input: Option<String>) -> Self
pub fn set_unique_request_token(self, input: Option<String>) -> Self
A unique identifier for this request which allows you to retry the call on error without creating duplicate HITs. This is useful in cases such as network timeouts where it is unclear whether or not the call succeeded on the server. If the HIT already exists in the system from a previous call using the same UniqueRequestToken, subsequent calls will return a AWS.MechanicalTurk.HitAlreadyExists error with a message containing the HITId.
Note: It is your responsibility to ensure uniqueness of the token. The unique token expires after 24 hours. Subsequent calls using the same UniqueRequestToken made after the 24 hour limit could create duplicate HITs.
sourcepub fn assignment_review_policy(self, input: ReviewPolicy) -> Self
pub fn assignment_review_policy(self, input: ReviewPolicy) -> Self
The Assignment-level Review Policy applies to the assignments under the HIT. You can specify for Mechanical Turk to take various actions based on the policy.
sourcepub fn set_assignment_review_policy(self, input: Option<ReviewPolicy>) -> Self
pub fn set_assignment_review_policy(self, input: Option<ReviewPolicy>) -> Self
The Assignment-level Review Policy applies to the assignments under the HIT. You can specify for Mechanical Turk to take various actions based on the policy.
sourcepub fn hit_review_policy(self, input: ReviewPolicy) -> Self
pub fn hit_review_policy(self, input: ReviewPolicy) -> Self
The HIT-level Review Policy applies to the HIT. You can specify for Mechanical Turk to take various actions based on the policy.
sourcepub fn set_hit_review_policy(self, input: Option<ReviewPolicy>) -> Self
pub fn set_hit_review_policy(self, input: Option<ReviewPolicy>) -> Self
The HIT-level Review Policy applies to the HIT. You can specify for Mechanical Turk to take various actions based on the policy.
sourcepub fn hit_layout_id(self, input: impl Into<String>) -> Self
pub fn hit_layout_id(self, input: impl Into<String>) -> Self
The HITLayoutId allows you to use a pre-existing HIT design with placeholder values and create an additional HIT by providing those values as HITLayoutParameters.
Constraints: Either a Question parameter or a HITLayoutId parameter must be provided.
sourcepub fn set_hit_layout_id(self, input: Option<String>) -> Self
pub fn set_hit_layout_id(self, input: Option<String>) -> Self
The HITLayoutId allows you to use a pre-existing HIT design with placeholder values and create an additional HIT by providing those values as HITLayoutParameters.
Constraints: Either a Question parameter or a HITLayoutId parameter must be provided.
sourcepub fn hit_layout_parameters(self, input: HitLayoutParameter) -> Self
pub fn hit_layout_parameters(self, input: HitLayoutParameter) -> Self
Appends an item to HITLayoutParameters
.
To override the contents of this collection use set_hit_layout_parameters
.
If the HITLayoutId is provided, any placeholder values must be filled in with values using the HITLayoutParameter structure. For more information, see HITLayout.
sourcepub fn set_hit_layout_parameters(
self,
input: Option<Vec<HitLayoutParameter>>
) -> Self
pub fn set_hit_layout_parameters(
self,
input: Option<Vec<HitLayoutParameter>>
) -> Self
If the HITLayoutId is provided, any placeholder values must be filled in with values using the HITLayoutParameter structure. For more information, see HITLayout.
Trait Implementations
sourceimpl Clone for CreateHITWithHITType
impl Clone for CreateHITWithHITType
sourcefn clone(&self) -> CreateHITWithHITType
fn clone(&self) -> CreateHITWithHITType
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
Auto Trait Implementations
impl !RefUnwindSafe for CreateHITWithHITType
impl Send for CreateHITWithHITType
impl Sync for CreateHITWithHITType
impl Unpin for CreateHITWithHITType
impl !UnwindSafe for CreateHITWithHITType
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more