Struct aws_sdk_lightsail::input::GetLoadBalancerMetricDataInput[−][src]

#[non_exhaustive]pub struct GetLoadBalancerMetricDataInput {
    pub load_balancer_name: Option<String>,
    pub metric_name: Option<LoadBalancerMetricName>,
    pub period: i32,
    pub start_time: Option<DateTime>,
    pub end_time: Option<DateTime>,
    pub unit: Option<MetricUnit>,
    pub statistics: Option<Vec<MetricStatistic>>,
}

Fields (Non-exhaustive)

This struct is marked as non-exhaustive

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

load_balancer_name: Option<String>

The name of the load balancer.

metric_name: Option<LoadBalancerMetricName>

The metric for which you want to return information.

Valid load balancer metric names are listed below, along with the most useful statistics to include in your request, and the published unit value.

ClientTLSNegotiationErrorCount - The number of TLS connections initiated by the client that did not establish a session with the load balancer due to a TLS error generated by the load balancer. Possible causes include a mismatch of ciphers or protocols.

Statistics: The most useful statistic is Sum.

Unit: The published unit is Count.
HealthyHostCount - The number of target instances that are considered healthy.

Statistics: The most useful statistic are Average, Minimum, and Maximum.

Unit: The published unit is Count.
HTTPCode_Instance_2XX_Count - The number of HTTP 2XX response codes generated by the target instances. This does not include any response codes generated by the load balancer.

Statistics: The most useful statistic is Sum. Note that Minimum, Maximum, and Average all return 1.

Unit: The published unit is Count.
HTTPCode_Instance_3XX_Count - The number of HTTP 3XX response codes generated by the target instances. This does not include any response codes generated by the load balancer.

Statistics: The most useful statistic is Sum. Note that Minimum, Maximum, and Average all return 1.

Unit: The published unit is Count.
HTTPCode_Instance_4XX_Count - The number of HTTP 4XX response codes generated by the target instances. This does not include any response codes generated by the load balancer.

Statistics: The most useful statistic is Sum. Note that Minimum, Maximum, and Average all return 1.

Unit: The published unit is Count.
HTTPCode_Instance_5XX_Count - The number of HTTP 5XX response codes generated by the target instances. This does not include any response codes generated by the load balancer.

Statistics: The most useful statistic is Sum. Note that Minimum, Maximum, and Average all return 1.

Unit: The published unit is Count.
HTTPCode_LB_4XX_Count - The number of HTTP 4XX client error codes that originated from the load balancer. Client errors are generated when requests are malformed or incomplete. These requests were not received by the target instance. This count does not include response codes generated by the target instances.

Statistics: The most useful statistic is Sum. Note that Minimum, Maximum, and Average all return 1.

Unit: The published unit is Count.
HTTPCode_LB_5XX_Count - The number of HTTP 5XX server error codes that originated from the load balancer. This does not include any response codes generated by the target instance. This metric is reported if there are no healthy instances attached to the load balancer, or if the request rate exceeds the capacity of the instances (spillover) or the load balancer.

Statistics: The most useful statistic is Sum. Note that Minimum, Maximum, and Average all return 1.

Unit: The published unit is Count.
InstanceResponseTime - The time elapsed, in seconds, after the request leaves the load balancer until a response from the target instance is received.

Statistics: The most useful statistic is Average.

Unit: The published unit is Seconds.
RejectedConnectionCount - The number of connections that were rejected because the load balancer had reached its maximum number of connections.

Statistics: The most useful statistic is Sum.

Unit: The published unit is Count.
RequestCount - The number of requests processed over IPv4. This count includes only the requests with a response generated by a target instance of the load balancer.

Statistics: The most useful statistic is Sum. Note that Minimum, Maximum, and Average all return 1.

Unit: The published unit is Count.
UnhealthyHostCount - The number of target instances that are considered unhealthy.

Statistics: The most useful statistic are Average, Minimum, and Maximum.

Unit: The published unit is Count.

period: i32

The granularity, in seconds, of the returned data points.

start_time: Option<DateTime>

The start time of the period.

end_time: Option<DateTime>

The end time of the period.

unit: Option<MetricUnit>

The unit for the metric data request. Valid units depend on the metric data being requested. For the valid units with each available metric, see the metricName parameter.

statistics: Option<Vec<MetricStatistic>>

The statistic for the metric.

The following statistics are available:

Minimum - The lowest value observed during the specified period. Use this value to determine low volumes of activity for your application.
Maximum - The highest value observed during the specified period. Use this value to determine high volumes of activity for your application.
Sum - All values submitted for the matching metric added together. You can use this statistic to determine the total volume of a metric.
Average - The value of Sum / SampleCount during the specified period. By comparing this statistic with the Minimum and Maximum values, you can determine the full scope of a metric and how close the average use is to the Minimum and Maximum values. This comparison helps you to know when to increase or decrease your resources.
SampleCount - The count, or number, of data points used for the statistical calculation.

Struct aws_sdk_lightsail::input::GetLoadBalancerMetricDataInput[−][src]

Fields (Non-exhaustive)

Implementations

impl GetLoadBalancerMetricDataInput

pub async fn make_operation( &self, _config: &Config) -> Result<Operation<GetLoadBalancerMetricData, AwsErrorRetryPolicy>, BuildError>

pub fn builder() -> Builder

impl GetLoadBalancerMetricDataInput

pub fn load_balancer_name(&self) -> Option<&str>

pub fn metric_name(&self) -> Option<&LoadBalancerMetricName>

pub fn period(&self) -> i32

pub fn start_time(&self) -> Option<&DateTime>

pub fn end_time(&self) -> Option<&DateTime>

pub fn unit(&self) -> Option<&MetricUnit>

pub fn statistics(&self) -> Option<&[MetricStatistic]>

Trait Implementations

impl Clone for GetLoadBalancerMetricDataInput

fn clone(&self) -> GetLoadBalancerMetricDataInput

fn clone_from(&mut self, source: &Self)

impl Debug for GetLoadBalancerMetricDataInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

impl PartialEq<GetLoadBalancerMetricDataInput> for GetLoadBalancerMetricDataInput

fn eq(&self, other: &GetLoadBalancerMetricDataInput) -> bool

fn ne(&self, other: &GetLoadBalancerMetricDataInput) -> bool

impl StructuralPartialEq for GetLoadBalancerMetricDataInput

Auto Trait Implementations

impl RefUnwindSafe for GetLoadBalancerMetricDataInput

impl Send for GetLoadBalancerMetricDataInput

impl Sync for GetLoadBalancerMetricDataInput

impl Unpin for GetLoadBalancerMetricDataInput

impl UnwindSafe for GetLoadBalancerMetricDataInput

Blanket Implementations

impl<T> Any for T where T: 'static + ?Sized,

pub fn type_id(&self) -> TypeId

impl<T> Borrow<T> for T where T: ?Sized,

pub fn borrow(&self) -> &T

impl<T> BorrowMut<T> for T where T: ?Sized,

pub fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

pub fn from(t: T) -> T

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

fn in_current_span(self) -> Instrumented<Self>

impl<T, U> Into<U> for T where U: From<T>,

pub fn into(self) -> U

impl<T> ToOwned for T where T: Clone,

type Owned = T

pub fn to_owned(&self) -> T

pub fn clone_into(&self, target: &mut T)

impl<T, U> TryFrom<U> for T where U: Into<T>,

type Error = Infallible

pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto<U> for T where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

pub fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where S: Into<Dispatch>,

fn with_current_subscriber(self) -> WithDispatch<Self>

pub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<GetLoadBalancerMetricData, AwsErrorRetryPolicy>, BuildError>

pub fn statistics(&self) -> Option<&[MetricStatistic ]>

impl<T> Any for T where
T: 'static + ?Sized,

impl<T> Borrow<T> for T where
T: ?Sized,

impl<T> BorrowMut<T> for T where
T: ?Sized,

impl<T, U> Into<U> for T where
U: From<T>,

impl<T> ToOwned for T where
T: Clone,

impl<T, U> TryFrom<U> for T where
U: Into<T>,

impl<T, U> TryInto<U> for T where
U: TryFrom<T>,

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,