// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[derive(Debug)]
pub(crate) struct Handle {
pub(crate) client: aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
pub(crate) conf: crate::Config,
}
/// Client for AWS IoT Fleet Hub
///
/// Client for invoking operations on AWS IoT Fleet Hub. Each operation on AWS IoT Fleet Hub is a method on this
/// this struct. `.send()` MUST be invoked on the generated operations to dispatch the request to the service.
///
/// # Examples
/// **Constructing a client and invoking an operation**
/// ```rust,no_run
/// # async fn docs() {
/// // create a shared configuration. This can be used & shared between multiple service clients.
/// let shared_config = aws_config::load_from_env().await;
/// let client = aws_sdk_iotfleethub::Client::new(&shared_config);
/// // invoke an operation
/// /* let rsp = client
/// .<operation_name>().
/// .<param>("some value")
/// .send().await; */
/// # }
/// ```
/// **Constructing a client with custom configuration**
/// ```rust,no_run
/// use aws_config::retry::RetryConfig;
/// # async fn docs() {
/// let shared_config = aws_config::load_from_env().await;
/// let config = aws_sdk_iotfleethub::config::Builder::from(&shared_config)
/// .retry_config(RetryConfig::disabled())
/// .build();
/// let client = aws_sdk_iotfleethub::Client::from_conf(config);
/// # }
#[derive(std::fmt::Debug)]
pub struct Client {
handle: std::sync::Arc<Handle>,
}
impl std::clone::Clone for Client {
fn clone(&self) -> Self {
Self {
handle: self.handle.clone(),
}
}
}
#[doc(inline)]
pub use aws_smithy_client::Builder;
impl
From<
aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
> for Client
{
fn from(
client: aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
) -> Self {
Self::with_config(client, crate::Config::builder().build())
}
}
impl Client {
/// Creates a client with the given service configuration.
pub fn with_config(
client: aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
conf: crate::Config,
) -> Self {
Self {
handle: std::sync::Arc::new(Handle { client, conf }),
}
}
/// Returns the client's configuration.
pub fn conf(&self) -> &crate::Config {
&self.handle.conf
}
}
impl Client {
/// Constructs a fluent builder for the [`CreateApplication`](crate::client::fluent_builders::CreateApplication) operation.
///
/// - The fluent builder is configurable:
/// - [`application_name(impl Into<String>)`](crate::client::fluent_builders::CreateApplication::application_name) / [`set_application_name(Option<String>)`](crate::client::fluent_builders::CreateApplication::set_application_name): <p>The name of the web application.</p>
/// - [`application_description(impl Into<String>)`](crate::client::fluent_builders::CreateApplication::application_description) / [`set_application_description(Option<String>)`](crate::client::fluent_builders::CreateApplication::set_application_description): <p>An optional description of the web application.</p>
/// - [`client_token(impl Into<String>)`](crate::client::fluent_builders::CreateApplication::client_token) / [`set_client_token(Option<String>)`](crate::client::fluent_builders::CreateApplication::set_client_token): <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
/// - [`role_arn(impl Into<String>)`](crate::client::fluent_builders::CreateApplication::role_arn) / [`set_role_arn(Option<String>)`](crate::client::fluent_builders::CreateApplication::set_role_arn): <p>The ARN of the role that the web application assumes when it interacts with AWS IoT Core.</p> <note> <p>The name of the role must be in the form <code>AWSIotFleetHub_<i>random_string</i> </code>.</p> </note>
/// - [`tags(HashMap<String, String>)`](crate::client::fluent_builders::CreateApplication::tags) / [`set_tags(Option<HashMap<String, String>>)`](crate::client::fluent_builders::CreateApplication::set_tags): <p>A set of key/value pairs that you can use to manage the web application resource.</p>
/// - On success, responds with [`CreateApplicationOutput`](crate::output::CreateApplicationOutput) with field(s):
/// - [`application_id(Option<String>)`](crate::output::CreateApplicationOutput::application_id): <p>The unique Id of the web application.</p>
/// - [`application_arn(Option<String>)`](crate::output::CreateApplicationOutput::application_arn): <p>The ARN of the web application.</p>
/// - On failure, responds with [`SdkError<CreateApplicationError>`](crate::error::CreateApplicationError)
pub fn create_application(&self) -> fluent_builders::CreateApplication {
fluent_builders::CreateApplication::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`DeleteApplication`](crate::client::fluent_builders::DeleteApplication) operation.
///
/// - The fluent builder is configurable:
/// - [`application_id(impl Into<String>)`](crate::client::fluent_builders::DeleteApplication::application_id) / [`set_application_id(Option<String>)`](crate::client::fluent_builders::DeleteApplication::set_application_id): <p>The unique Id of the web application.</p>
/// - [`client_token(impl Into<String>)`](crate::client::fluent_builders::DeleteApplication::client_token) / [`set_client_token(Option<String>)`](crate::client::fluent_builders::DeleteApplication::set_client_token): <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
/// - On success, responds with [`DeleteApplicationOutput`](crate::output::DeleteApplicationOutput)
/// - On failure, responds with [`SdkError<DeleteApplicationError>`](crate::error::DeleteApplicationError)
pub fn delete_application(&self) -> fluent_builders::DeleteApplication {
fluent_builders::DeleteApplication::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`DescribeApplication`](crate::client::fluent_builders::DescribeApplication) operation.
///
/// - The fluent builder is configurable:
/// - [`application_id(impl Into<String>)`](crate::client::fluent_builders::DescribeApplication::application_id) / [`set_application_id(Option<String>)`](crate::client::fluent_builders::DescribeApplication::set_application_id): <p>The unique Id of the web application.</p>
/// - On success, responds with [`DescribeApplicationOutput`](crate::output::DescribeApplicationOutput) with field(s):
/// - [`application_id(Option<String>)`](crate::output::DescribeApplicationOutput::application_id): <p>The unique Id of the web application.</p>
/// - [`application_arn(Option<String>)`](crate::output::DescribeApplicationOutput::application_arn): <p>The ARN of the web application.</p>
/// - [`application_name(Option<String>)`](crate::output::DescribeApplicationOutput::application_name): <p>The name of the web application.</p>
/// - [`application_description(Option<String>)`](crate::output::DescribeApplicationOutput::application_description): <p>An optional description of the web application.</p>
/// - [`application_url(Option<String>)`](crate::output::DescribeApplicationOutput::application_url): <p>The URL of the web application.</p>
/// - [`application_state(Option<ApplicationState>)`](crate::output::DescribeApplicationOutput::application_state): <p>The current state of the web application.</p>
/// - [`application_creation_date(i64)`](crate::output::DescribeApplicationOutput::application_creation_date): <p>The date (in Unix epoch time) when the application was created.</p>
/// - [`application_last_update_date(i64)`](crate::output::DescribeApplicationOutput::application_last_update_date): <p>The date (in Unix epoch time) when the application was last updated.</p>
/// - [`role_arn(Option<String>)`](crate::output::DescribeApplicationOutput::role_arn): <p>The ARN of the role that the web application assumes when it interacts with AWS IoT Core.</p>
/// - [`sso_client_id(Option<String>)`](crate::output::DescribeApplicationOutput::sso_client_id): <p>The Id of the single sign-on client that you use to authenticate and authorize users on the web application.</p>
/// - [`error_message(Option<String>)`](crate::output::DescribeApplicationOutput::error_message): <p>A message indicating why the <code>DescribeApplication</code> API failed.</p>
/// - [`tags(Option<HashMap<String, String>>)`](crate::output::DescribeApplicationOutput::tags): <p>A set of key/value pairs that you can use to manage the web application resource.</p>
/// - On failure, responds with [`SdkError<DescribeApplicationError>`](crate::error::DescribeApplicationError)
pub fn describe_application(&self) -> fluent_builders::DescribeApplication {
fluent_builders::DescribeApplication::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`ListApplications`](crate::client::fluent_builders::ListApplications) operation.
/// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListApplications::into_paginator).
///
/// - The fluent builder is configurable:
/// - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListApplications::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListApplications::set_next_token): <p>A token used to get the next set of results.</p>
/// - On success, responds with [`ListApplicationsOutput`](crate::output::ListApplicationsOutput) with field(s):
/// - [`application_summaries(Option<Vec<ApplicationSummary>>)`](crate::output::ListApplicationsOutput::application_summaries): <p>An array of objects that provide summaries of information about the web applications in the list.</p>
/// - [`next_token(Option<String>)`](crate::output::ListApplicationsOutput::next_token): <p>A token used to get the next set of results.</p>
/// - On failure, responds with [`SdkError<ListApplicationsError>`](crate::error::ListApplicationsError)
pub fn list_applications(&self) -> fluent_builders::ListApplications {
fluent_builders::ListApplications::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`ListTagsForResource`](crate::client::fluent_builders::ListTagsForResource) operation.
///
/// - The fluent builder is configurable:
/// - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::ListTagsForResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::ListTagsForResource::set_resource_arn): <p>The ARN of the resource.</p>
/// - On success, responds with [`ListTagsForResourceOutput`](crate::output::ListTagsForResourceOutput) with field(s):
/// - [`tags(Option<HashMap<String, String>>)`](crate::output::ListTagsForResourceOutput::tags): <p>The list of tags assigned to the resource.</p>
/// - On failure, responds with [`SdkError<ListTagsForResourceError>`](crate::error::ListTagsForResourceError)
pub fn list_tags_for_resource(&self) -> fluent_builders::ListTagsForResource {
fluent_builders::ListTagsForResource::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`TagResource`](crate::client::fluent_builders::TagResource) operation.
///
/// - The fluent builder is configurable:
/// - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::TagResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::TagResource::set_resource_arn): <p>The ARN of the resource.</p>
/// - [`tags(HashMap<String, String>)`](crate::client::fluent_builders::TagResource::tags) / [`set_tags(Option<HashMap<String, String>>)`](crate::client::fluent_builders::TagResource::set_tags): <p>The new or modified tags for the resource.</p>
/// - On success, responds with [`TagResourceOutput`](crate::output::TagResourceOutput)
/// - On failure, responds with [`SdkError<TagResourceError>`](crate::error::TagResourceError)
pub fn tag_resource(&self) -> fluent_builders::TagResource {
fluent_builders::TagResource::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`UntagResource`](crate::client::fluent_builders::UntagResource) operation.
///
/// - The fluent builder is configurable:
/// - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::UntagResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::UntagResource::set_resource_arn): <p>The ARN of the resource.</p>
/// - [`tag_keys(Vec<String>)`](crate::client::fluent_builders::UntagResource::tag_keys) / [`set_tag_keys(Option<Vec<String>>)`](crate::client::fluent_builders::UntagResource::set_tag_keys): <p>A list of the keys of the tags to be removed from the resource.</p>
/// - On success, responds with [`UntagResourceOutput`](crate::output::UntagResourceOutput)
/// - On failure, responds with [`SdkError<UntagResourceError>`](crate::error::UntagResourceError)
pub fn untag_resource(&self) -> fluent_builders::UntagResource {
fluent_builders::UntagResource::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`UpdateApplication`](crate::client::fluent_builders::UpdateApplication) operation.
///
/// - The fluent builder is configurable:
/// - [`application_id(impl Into<String>)`](crate::client::fluent_builders::UpdateApplication::application_id) / [`set_application_id(Option<String>)`](crate::client::fluent_builders::UpdateApplication::set_application_id): <p>The unique Id of the web application.</p>
/// - [`application_name(impl Into<String>)`](crate::client::fluent_builders::UpdateApplication::application_name) / [`set_application_name(Option<String>)`](crate::client::fluent_builders::UpdateApplication::set_application_name): <p>The name of the web application.</p>
/// - [`application_description(impl Into<String>)`](crate::client::fluent_builders::UpdateApplication::application_description) / [`set_application_description(Option<String>)`](crate::client::fluent_builders::UpdateApplication::set_application_description): <p>An optional description of the web application.</p>
/// - [`client_token(impl Into<String>)`](crate::client::fluent_builders::UpdateApplication::client_token) / [`set_client_token(Option<String>)`](crate::client::fluent_builders::UpdateApplication::set_client_token): <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
/// - On success, responds with [`UpdateApplicationOutput`](crate::output::UpdateApplicationOutput)
/// - On failure, responds with [`SdkError<UpdateApplicationError>`](crate::error::UpdateApplicationError)
pub fn update_application(&self) -> fluent_builders::UpdateApplication {
fluent_builders::UpdateApplication::new(self.handle.clone())
}
}
pub mod fluent_builders {
//! Utilities to ergonomically construct a request to the service.
//!
//! Fluent builders are created through the [`Client`](crate::client::Client) by calling
//! one if its operation methods. After parameters are set using the builder methods,
//! the `send` method can be called to initiate the request.
/// Fluent builder constructing a request to `CreateApplication`.
///
/// <p>Creates a Fleet Hub for AWS IoT Device Management web application.</p> <note>
/// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
/// </note>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct CreateApplication {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::create_application_input::Builder,
}
impl CreateApplication {
/// Creates a new `CreateApplication`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::CreateApplication,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::CreateApplicationError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::CreateApplicationOutput,
aws_smithy_http::result::SdkError<crate::error::CreateApplicationError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p>The name of the web application.</p>
pub fn application_name(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.application_name(input.into());
self
}
/// <p>The name of the web application.</p>
pub fn set_application_name(
mut self,
input: std::option::Option<std::string::String>,
) -> Self {
self.inner = self.inner.set_application_name(input);
self
}
/// <p>An optional description of the web application.</p>
pub fn application_description(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.application_description(input.into());
self
}
/// <p>An optional description of the web application.</p>
pub fn set_application_description(
mut self,
input: std::option::Option<std::string::String>,
) -> Self {
self.inner = self.inner.set_application_description(input);
self
}
/// <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
pub fn client_token(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.client_token(input.into());
self
}
/// <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
pub fn set_client_token(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_client_token(input);
self
}
/// <p>The ARN of the role that the web application assumes when it interacts with AWS IoT Core.</p> <note>
/// <p>The name of the role must be in the form <code>AWSIotFleetHub_<i>random_string</i> </code>.</p>
/// </note>
pub fn role_arn(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.role_arn(input.into());
self
}
/// <p>The ARN of the role that the web application assumes when it interacts with AWS IoT Core.</p> <note>
/// <p>The name of the role must be in the form <code>AWSIotFleetHub_<i>random_string</i> </code>.</p>
/// </note>
pub fn set_role_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_role_arn(input);
self
}
/// Adds a key-value pair to `tags`.
///
/// To override the contents of this collection use [`set_tags`](Self::set_tags).
///
/// <p>A set of key/value pairs that you can use to manage the web application resource.</p>
pub fn tags(
mut self,
k: impl Into<std::string::String>,
v: impl Into<std::string::String>,
) -> Self {
self.inner = self.inner.tags(k.into(), v.into());
self
}
/// <p>A set of key/value pairs that you can use to manage the web application resource.</p>
pub fn set_tags(
mut self,
input: std::option::Option<
std::collections::HashMap<std::string::String, std::string::String>,
>,
) -> Self {
self.inner = self.inner.set_tags(input);
self
}
}
/// Fluent builder constructing a request to `DeleteApplication`.
///
/// <p>Deletes a Fleet Hub for AWS IoT Device Management web application.</p> <note>
/// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
/// </note>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct DeleteApplication {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::delete_application_input::Builder,
}
impl DeleteApplication {
/// Creates a new `DeleteApplication`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::DeleteApplication,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::DeleteApplicationError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::DeleteApplicationOutput,
aws_smithy_http::result::SdkError<crate::error::DeleteApplicationError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p>The unique Id of the web application.</p>
pub fn application_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.application_id(input.into());
self
}
/// <p>The unique Id of the web application.</p>
pub fn set_application_id(
mut self,
input: std::option::Option<std::string::String>,
) -> Self {
self.inner = self.inner.set_application_id(input);
self
}
/// <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
pub fn client_token(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.client_token(input.into());
self
}
/// <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
pub fn set_client_token(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_client_token(input);
self
}
}
/// Fluent builder constructing a request to `DescribeApplication`.
///
/// <p>Gets information about a Fleet Hub for AWS IoT Device Management web application.</p> <note>
/// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
/// </note>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct DescribeApplication {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::describe_application_input::Builder,
}
impl DescribeApplication {
/// Creates a new `DescribeApplication`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::DescribeApplication,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::DescribeApplicationError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::DescribeApplicationOutput,
aws_smithy_http::result::SdkError<crate::error::DescribeApplicationError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p>The unique Id of the web application.</p>
pub fn application_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.application_id(input.into());
self
}
/// <p>The unique Id of the web application.</p>
pub fn set_application_id(
mut self,
input: std::option::Option<std::string::String>,
) -> Self {
self.inner = self.inner.set_application_id(input);
self
}
}
/// Fluent builder constructing a request to `ListApplications`.
///
/// <p>Gets a list of Fleet Hub for AWS IoT Device Management web applications for the current account.</p> <note>
/// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
/// </note>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct ListApplications {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::list_applications_input::Builder,
}
impl ListApplications {
/// Creates a new `ListApplications`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::ListApplications,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::ListApplicationsError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::ListApplicationsOutput,
aws_smithy_http::result::SdkError<crate::error::ListApplicationsError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// Create a paginator for this request
///
/// Paginators are used by calling [`send().await`](crate::paginator::ListApplicationsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
pub fn into_paginator(self) -> crate::paginator::ListApplicationsPaginator {
crate::paginator::ListApplicationsPaginator::new(self.handle, self.inner)
}
/// <p>A token used to get the next set of results.</p>
pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.next_token(input.into());
self
}
/// <p>A token used to get the next set of results.</p>
pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_next_token(input);
self
}
}
/// Fluent builder constructing a request to `ListTagsForResource`.
///
/// <p>Lists the tags for the specified resource.</p> <note>
/// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
/// </note>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct ListTagsForResource {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::list_tags_for_resource_input::Builder,
}
impl ListTagsForResource {
/// Creates a new `ListTagsForResource`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::ListTagsForResource,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::ListTagsForResourceError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::ListTagsForResourceOutput,
aws_smithy_http::result::SdkError<crate::error::ListTagsForResourceError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p>The ARN of the resource.</p>
pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.resource_arn(input.into());
self
}
/// <p>The ARN of the resource.</p>
pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_resource_arn(input);
self
}
}
/// Fluent builder constructing a request to `TagResource`.
///
/// <p>Adds to or modifies the tags of the specified resource. Tags are metadata which can be used to manage a resource.</p> <note>
/// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
/// </note>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct TagResource {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::tag_resource_input::Builder,
}
impl TagResource {
/// Creates a new `TagResource`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::TagResource,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::TagResourceError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::TagResourceOutput,
aws_smithy_http::result::SdkError<crate::error::TagResourceError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p>The ARN of the resource.</p>
pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.resource_arn(input.into());
self
}
/// <p>The ARN of the resource.</p>
pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_resource_arn(input);
self
}
/// Adds a key-value pair to `tags`.
///
/// To override the contents of this collection use [`set_tags`](Self::set_tags).
///
/// <p>The new or modified tags for the resource.</p>
pub fn tags(
mut self,
k: impl Into<std::string::String>,
v: impl Into<std::string::String>,
) -> Self {
self.inner = self.inner.tags(k.into(), v.into());
self
}
/// <p>The new or modified tags for the resource.</p>
pub fn set_tags(
mut self,
input: std::option::Option<
std::collections::HashMap<std::string::String, std::string::String>,
>,
) -> Self {
self.inner = self.inner.set_tags(input);
self
}
}
/// Fluent builder constructing a request to `UntagResource`.
///
/// <p>Removes the specified tags (metadata) from the resource.</p> <note>
/// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
/// </note>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct UntagResource {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::untag_resource_input::Builder,
}
impl UntagResource {
/// Creates a new `UntagResource`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::UntagResource,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::UntagResourceError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::UntagResourceOutput,
aws_smithy_http::result::SdkError<crate::error::UntagResourceError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p>The ARN of the resource.</p>
pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.resource_arn(input.into());
self
}
/// <p>The ARN of the resource.</p>
pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_resource_arn(input);
self
}
/// Appends an item to `tagKeys`.
///
/// To override the contents of this collection use [`set_tag_keys`](Self::set_tag_keys).
///
/// <p>A list of the keys of the tags to be removed from the resource.</p>
pub fn tag_keys(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.tag_keys(input.into());
self
}
/// <p>A list of the keys of the tags to be removed from the resource.</p>
pub fn set_tag_keys(
mut self,
input: std::option::Option<std::vec::Vec<std::string::String>>,
) -> Self {
self.inner = self.inner.set_tag_keys(input);
self
}
}
/// Fluent builder constructing a request to `UpdateApplication`.
///
/// <p>Updates information about a Fleet Hub for a AWS IoT Device Management web application.</p> <note>
/// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
/// </note>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct UpdateApplication {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::update_application_input::Builder,
}
impl UpdateApplication {
/// Creates a new `UpdateApplication`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::UpdateApplication,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::UpdateApplicationError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::UpdateApplicationOutput,
aws_smithy_http::result::SdkError<crate::error::UpdateApplicationError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p>The unique Id of the web application.</p>
pub fn application_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.application_id(input.into());
self
}
/// <p>The unique Id of the web application.</p>
pub fn set_application_id(
mut self,
input: std::option::Option<std::string::String>,
) -> Self {
self.inner = self.inner.set_application_id(input);
self
}
/// <p>The name of the web application.</p>
pub fn application_name(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.application_name(input.into());
self
}
/// <p>The name of the web application.</p>
pub fn set_application_name(
mut self,
input: std::option::Option<std::string::String>,
) -> Self {
self.inner = self.inner.set_application_name(input);
self
}
/// <p>An optional description of the web application.</p>
pub fn application_description(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.application_description(input.into());
self
}
/// <p>An optional description of the web application.</p>
pub fn set_application_description(
mut self,
input: std::option::Option<std::string::String>,
) -> Self {
self.inner = self.inner.set_application_description(input);
self
}
/// <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
pub fn client_token(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.client_token(input.into());
self
}
/// <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
pub fn set_client_token(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_client_token(input);
self
}
}
}
impl Client {
/// Creates a new client from an [SDK Config](aws_types::sdk_config::SdkConfig).
///
/// # Panics
///
/// - This method will panic if the `sdk_config` is missing an async sleep implementation. If you experience this panic, set
/// the `sleep_impl` on the Config passed into this function to fix it.
/// - This method will panic if the `sdk_config` is missing an HTTP connector. If you experience this panic, set the
/// `http_connector` on the Config passed into this function to fix it.
pub fn new(sdk_config: &aws_types::sdk_config::SdkConfig) -> Self {
Self::from_conf(sdk_config.into())
}
/// Creates a new client from the service [`Config`](crate::Config).
///
/// # Panics
///
/// - This method will panic if the `conf` is missing an async sleep implementation. If you experience this panic, set
/// the `sleep_impl` on the Config passed into this function to fix it.
/// - This method will panic if the `conf` is missing an HTTP connector. If you experience this panic, set the
/// `http_connector` on the Config passed into this function to fix it.
pub fn from_conf(conf: crate::Config) -> Self {
let retry_config = conf
.retry_config()
.cloned()
.unwrap_or_else(aws_smithy_types::retry::RetryConfig::disabled);
let timeout_config = conf
.timeout_config()
.cloned()
.unwrap_or_else(aws_smithy_types::timeout::TimeoutConfig::disabled);
let sleep_impl = conf.sleep_impl();
if (retry_config.has_retry() || timeout_config.has_timeouts()) && sleep_impl.is_none() {
panic!("An async sleep implementation is required for retries or timeouts to work. \
Set the `sleep_impl` on the Config passed into this function to fix this panic.");
}
let connector = conf.http_connector().and_then(|c| {
let timeout_config = conf
.timeout_config()
.cloned()
.unwrap_or_else(aws_smithy_types::timeout::TimeoutConfig::disabled);
let connector_settings =
aws_smithy_client::http_connector::ConnectorSettings::from_timeout_config(
&timeout_config,
);
c.connector(&connector_settings, conf.sleep_impl())
});
let builder = aws_smithy_client::Builder::new();
let builder = match connector {
// Use provided connector
Some(c) => builder.connector(c),
None => {
#[cfg(any(feature = "rustls", feature = "native-tls"))]
{
// Use default connector based on enabled features
builder.dyn_https_connector(
aws_smithy_client::http_connector::ConnectorSettings::from_timeout_config(
&timeout_config,
),
)
}
#[cfg(not(any(feature = "rustls", feature = "native-tls")))]
{
panic!("No HTTP connector was available. Enable the `rustls` or `native-tls` crate feature or set a connector to fix this.");
}
}
};
let mut builder = builder
.middleware(aws_smithy_client::erase::DynMiddleware::new(
crate::middleware::DefaultMiddleware::new(),
))
.retry_config(retry_config.into())
.operation_timeout_config(timeout_config.into());
builder.set_sleep_impl(sleep_impl);
let client = builder.build();
Self {
handle: std::sync::Arc::new(Handle { client, conf }),
}
}
}