Struct aws_sdk_iot::client::fluent_builders::CreateOTAUpdate
source · [−]pub struct CreateOTAUpdate { /* private fields */ }
Expand description
Fluent builder constructing a request to CreateOTAUpdate
.
Creates an IoT OTA update on a target group of things or groups.
Requires permission to access the CreateOTAUpdate action.
Implementations
sourceimpl CreateOTAUpdate
impl CreateOTAUpdate
sourcepub async fn send(
self
) -> Result<CreateOtaUpdateOutput, SdkError<CreateOTAUpdateError>>
pub async fn send(
self
) -> Result<CreateOtaUpdateOutput, SdkError<CreateOTAUpdateError>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn ota_update_id(self, input: impl Into<String>) -> Self
pub fn ota_update_id(self, input: impl Into<String>) -> Self
The ID of the OTA update to be created.
sourcepub fn set_ota_update_id(self, input: Option<String>) -> Self
pub fn set_ota_update_id(self, input: Option<String>) -> Self
The ID of the OTA update to be created.
sourcepub fn description(self, input: impl Into<String>) -> Self
pub fn description(self, input: impl Into<String>) -> Self
The description of the OTA update.
sourcepub fn set_description(self, input: Option<String>) -> Self
pub fn set_description(self, input: Option<String>) -> Self
The description of the OTA update.
sourcepub fn targets(self, input: impl Into<String>) -> Self
pub fn targets(self, input: impl Into<String>) -> Self
Appends an item to targets
.
To override the contents of this collection use set_targets
.
The devices targeted to receive OTA updates.
sourcepub fn set_targets(self, input: Option<Vec<String>>) -> Self
pub fn set_targets(self, input: Option<Vec<String>>) -> Self
The devices targeted to receive OTA updates.
sourcepub fn protocols(self, input: Protocol) -> Self
pub fn protocols(self, input: Protocol) -> Self
Appends an item to protocols
.
To override the contents of this collection use set_protocols
.
The protocol used to transfer the OTA update image. Valid values are [HTTP], [MQTT], [HTTP, MQTT]. When both HTTP and MQTT are specified, the target device can choose the protocol.
sourcepub fn set_protocols(self, input: Option<Vec<Protocol>>) -> Self
pub fn set_protocols(self, input: Option<Vec<Protocol>>) -> Self
The protocol used to transfer the OTA update image. Valid values are [HTTP], [MQTT], [HTTP, MQTT]. When both HTTP and MQTT are specified, the target device can choose the protocol.
sourcepub fn target_selection(self, input: TargetSelection) -> Self
pub fn target_selection(self, input: TargetSelection) -> Self
Specifies whether the update will continue to run (CONTINUOUS), or will be complete after all the things specified as targets have completed the update (SNAPSHOT). If continuous, the update may also be run on a thing when a change is detected in a target. For example, an update will run on a thing when the thing is added to a target group, even after the update was completed by all things originally in the group. Valid values: CONTINUOUS | SNAPSHOT.
sourcepub fn set_target_selection(self, input: Option<TargetSelection>) -> Self
pub fn set_target_selection(self, input: Option<TargetSelection>) -> Self
Specifies whether the update will continue to run (CONTINUOUS), or will be complete after all the things specified as targets have completed the update (SNAPSHOT). If continuous, the update may also be run on a thing when a change is detected in a target. For example, an update will run on a thing when the thing is added to a target group, even after the update was completed by all things originally in the group. Valid values: CONTINUOUS | SNAPSHOT.
sourcepub fn aws_job_executions_rollout_config(
self,
input: AwsJobExecutionsRolloutConfig
) -> Self
pub fn aws_job_executions_rollout_config(
self,
input: AwsJobExecutionsRolloutConfig
) -> Self
Configuration for the rollout of OTA updates.
sourcepub fn set_aws_job_executions_rollout_config(
self,
input: Option<AwsJobExecutionsRolloutConfig>
) -> Self
pub fn set_aws_job_executions_rollout_config(
self,
input: Option<AwsJobExecutionsRolloutConfig>
) -> Self
Configuration for the rollout of OTA updates.
sourcepub fn aws_job_presigned_url_config(
self,
input: AwsJobPresignedUrlConfig
) -> Self
pub fn aws_job_presigned_url_config(
self,
input: AwsJobPresignedUrlConfig
) -> Self
Configuration information for pre-signed URLs.
sourcepub fn set_aws_job_presigned_url_config(
self,
input: Option<AwsJobPresignedUrlConfig>
) -> Self
pub fn set_aws_job_presigned_url_config(
self,
input: Option<AwsJobPresignedUrlConfig>
) -> Self
Configuration information for pre-signed URLs.
sourcepub fn aws_job_abort_config(self, input: AwsJobAbortConfig) -> Self
pub fn aws_job_abort_config(self, input: AwsJobAbortConfig) -> Self
The criteria that determine when and how a job abort takes place.
sourcepub fn set_aws_job_abort_config(self, input: Option<AwsJobAbortConfig>) -> Self
pub fn set_aws_job_abort_config(self, input: Option<AwsJobAbortConfig>) -> Self
The criteria that determine when and how a job abort takes place.
sourcepub fn aws_job_timeout_config(self, input: AwsJobTimeoutConfig) -> Self
pub fn aws_job_timeout_config(self, input: AwsJobTimeoutConfig) -> Self
Specifies the amount of time each device has to finish its execution of the job. A timer is started when the job execution status is set to IN_PROGRESS
. If the job execution status is not set to another terminal state before the timer expires, it will be automatically set to TIMED_OUT
.
sourcepub fn set_aws_job_timeout_config(
self,
input: Option<AwsJobTimeoutConfig>
) -> Self
pub fn set_aws_job_timeout_config(
self,
input: Option<AwsJobTimeoutConfig>
) -> Self
Specifies the amount of time each device has to finish its execution of the job. A timer is started when the job execution status is set to IN_PROGRESS
. If the job execution status is not set to another terminal state before the timer expires, it will be automatically set to TIMED_OUT
.
sourcepub fn files(self, input: OtaUpdateFile) -> Self
pub fn files(self, input: OtaUpdateFile) -> Self
Appends an item to files
.
To override the contents of this collection use set_files
.
The files to be streamed by the OTA update.
sourcepub fn set_files(self, input: Option<Vec<OtaUpdateFile>>) -> Self
pub fn set_files(self, input: Option<Vec<OtaUpdateFile>>) -> Self
The files to be streamed by the OTA update.
sourcepub fn role_arn(self, input: impl Into<String>) -> Self
pub fn role_arn(self, input: impl Into<String>) -> Self
The IAM role that grants Amazon Web Services IoT Core access to the Amazon S3, IoT jobs and Amazon Web Services Code Signing resources to create an OTA update job.
sourcepub fn set_role_arn(self, input: Option<String>) -> Self
pub fn set_role_arn(self, input: Option<String>) -> Self
The IAM role that grants Amazon Web Services IoT Core access to the Amazon S3, IoT jobs and Amazon Web Services Code Signing resources to create an OTA update job.
sourcepub fn additional_parameters(
self,
k: impl Into<String>,
v: impl Into<String>
) -> Self
pub fn additional_parameters(
self,
k: impl Into<String>,
v: impl Into<String>
) -> Self
Adds a key-value pair to additionalParameters
.
To override the contents of this collection use set_additional_parameters
.
A list of additional OTA update parameters which are name-value pairs.
sourcepub fn set_additional_parameters(
self,
input: Option<HashMap<String, String>>
) -> Self
pub fn set_additional_parameters(
self,
input: Option<HashMap<String, String>>
) -> Self
A list of additional OTA update parameters which are name-value pairs.
Appends an item to tags
.
To override the contents of this collection use set_tags
.
Metadata which can be used to manage updates.
Metadata which can be used to manage updates.
Trait Implementations
sourceimpl Clone for CreateOTAUpdate
impl Clone for CreateOTAUpdate
sourcefn clone(&self) -> CreateOTAUpdate
fn clone(&self) -> CreateOTAUpdate
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
Auto Trait Implementations
impl !RefUnwindSafe for CreateOTAUpdate
impl Send for CreateOTAUpdate
impl Sync for CreateOTAUpdate
impl Unpin for CreateOTAUpdate
impl !UnwindSafe for CreateOTAUpdate
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more