pub struct UpdateEndpointGroup { /* private fields */ }
Expand description
Fluent builder constructing a request to UpdateEndpointGroup
.
Update an endpoint group. A resource must be valid and active when you add it as an endpoint.
Implementations
sourceimpl UpdateEndpointGroup
impl UpdateEndpointGroup
sourcepub async fn send(
self
) -> Result<UpdateEndpointGroupOutput, SdkError<UpdateEndpointGroupError>>
pub async fn send(
self
) -> Result<UpdateEndpointGroupOutput, SdkError<UpdateEndpointGroupError>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn endpoint_group_arn(self, input: impl Into<String>) -> Self
pub fn endpoint_group_arn(self, input: impl Into<String>) -> Self
The Amazon Resource Name (ARN) of the endpoint group.
sourcepub fn set_endpoint_group_arn(self, input: Option<String>) -> Self
pub fn set_endpoint_group_arn(self, input: Option<String>) -> Self
The Amazon Resource Name (ARN) of the endpoint group.
sourcepub fn endpoint_configurations(self, input: EndpointConfiguration) -> Self
pub fn endpoint_configurations(self, input: EndpointConfiguration) -> Self
Appends an item to EndpointConfigurations
.
To override the contents of this collection use set_endpoint_configurations
.
The list of endpoint objects. A resource must be valid and active when you add it as an endpoint.
sourcepub fn set_endpoint_configurations(
self,
input: Option<Vec<EndpointConfiguration>>
) -> Self
pub fn set_endpoint_configurations(
self,
input: Option<Vec<EndpointConfiguration>>
) -> Self
The list of endpoint objects. A resource must be valid and active when you add it as an endpoint.
sourcepub fn traffic_dial_percentage(self, input: f32) -> Self
pub fn traffic_dial_percentage(self, input: f32) -> Self
The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.
Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.
The default value is 100.
sourcepub fn set_traffic_dial_percentage(self, input: Option<f32>) -> Self
pub fn set_traffic_dial_percentage(self, input: Option<f32>) -> Self
The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.
Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.
The default value is 100.
sourcepub fn health_check_port(self, input: i32) -> Self
pub fn health_check_port(self, input: i32) -> Self
The port that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If the listener port is a list of ports, Global Accelerator uses the first port in the list.
sourcepub fn set_health_check_port(self, input: Option<i32>) -> Self
pub fn set_health_check_port(self, input: Option<i32>) -> Self
The port that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If the listener port is a list of ports, Global Accelerator uses the first port in the list.
sourcepub fn health_check_protocol(self, input: HealthCheckProtocol) -> Self
pub fn health_check_protocol(self, input: HealthCheckProtocol) -> Self
The protocol that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.
sourcepub fn set_health_check_protocol(
self,
input: Option<HealthCheckProtocol>
) -> Self
pub fn set_health_check_protocol(
self,
input: Option<HealthCheckProtocol>
) -> Self
The protocol that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.
sourcepub fn health_check_path(self, input: impl Into<String>) -> Self
pub fn health_check_path(self, input: impl Into<String>) -> Self
If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The default value is slash (/).
sourcepub fn set_health_check_path(self, input: Option<String>) -> Self
pub fn set_health_check_path(self, input: Option<String>) -> Self
If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The default value is slash (/).
sourcepub fn health_check_interval_seconds(self, input: i32) -> Self
pub fn health_check_interval_seconds(self, input: i32) -> Self
The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.
sourcepub fn set_health_check_interval_seconds(self, input: Option<i32>) -> Self
pub fn set_health_check_interval_seconds(self, input: Option<i32>) -> Self
The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.
sourcepub fn threshold_count(self, input: i32) -> Self
pub fn threshold_count(self, input: i32) -> Self
The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.
sourcepub fn set_threshold_count(self, input: Option<i32>) -> Self
pub fn set_threshold_count(self, input: Option<i32>) -> Self
The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.
sourcepub fn port_overrides(self, input: PortOverride) -> Self
pub fn port_overrides(self, input: PortOverride) -> Self
Appends an item to PortOverrides
.
To override the contents of this collection use set_port_overrides
.
Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.
For more information, see Port overrides in the AWS Global Accelerator Developer Guide.
sourcepub fn set_port_overrides(self, input: Option<Vec<PortOverride>>) -> Self
pub fn set_port_overrides(self, input: Option<Vec<PortOverride>>) -> Self
Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.
For more information, see Port overrides in the AWS Global Accelerator Developer Guide.
Trait Implementations
sourceimpl Clone for UpdateEndpointGroup
impl Clone for UpdateEndpointGroup
sourcefn clone(&self) -> UpdateEndpointGroup
fn clone(&self) -> UpdateEndpointGroup
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
Auto Trait Implementations
impl !RefUnwindSafe for UpdateEndpointGroup
impl Send for UpdateEndpointGroup
impl Sync for UpdateEndpointGroup
impl Unpin for UpdateEndpointGroup
impl !UnwindSafe for UpdateEndpointGroup
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more