Struct aws_sdk_globalaccelerator::client::fluent_builders::CreateCustomRoutingAccelerator
source · [−]pub struct CreateCustomRoutingAccelerator { /* private fields */ }
Expand description
Fluent builder constructing a request to CreateCustomRoutingAccelerator
.
Create a custom routing accelerator. A custom routing accelerator directs traffic to one of possibly thousands of Amazon EC2 instance destinations running in a single or multiple virtual private clouds (VPC) subnet endpoints.
Be aware that, by default, all destination EC2 instances in a VPC subnet endpoint cannot receive traffic. To enable all destinations to receive traffic, or to specify individual port mappings that can receive traffic, see the AllowCustomRoutingTraffic operation.
Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators.
Implementations
sourceimpl CreateCustomRoutingAccelerator
impl CreateCustomRoutingAccelerator
sourcepub async fn send(
self
) -> Result<CreateCustomRoutingAcceleratorOutput, SdkError<CreateCustomRoutingAcceleratorError>>
pub async fn send(
self
) -> Result<CreateCustomRoutingAcceleratorOutput, SdkError<CreateCustomRoutingAcceleratorError>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn name(self, input: impl Into<String>) -> Self
pub fn name(self, input: impl Into<String>) -> Self
The name of a custom routing accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.
sourcepub fn set_name(self, input: Option<String>) -> Self
pub fn set_name(self, input: Option<String>) -> Self
The name of a custom routing accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.
sourcepub fn ip_address_type(self, input: IpAddressType) -> Self
pub fn ip_address_type(self, input: IpAddressType) -> Self
The value for the address type must be IPv4.
sourcepub fn set_ip_address_type(self, input: Option<IpAddressType>) -> Self
pub fn set_ip_address_type(self, input: Option<IpAddressType>) -> Self
The value for the address type must be IPv4.
sourcepub fn ip_addresses(self, input: impl Into<String>) -> Self
pub fn ip_addresses(self, input: impl Into<String>) -> Self
Appends an item to IpAddresses
.
To override the contents of this collection use set_ip_addresses
.
Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose IP addresses from your own pool to use for the accelerator's static IP addresses when you create an accelerator. You can specify one or two addresses, separated by a space. Do not include the /32 suffix.
Only one IP address from each of your IP address ranges can be used for each accelerator. If you specify only one IP address from your IP address range, Global Accelerator assigns a second static IP address for the accelerator from the AWS IP address pool.
Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses.
For more information, see Bring your own IP addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
sourcepub fn set_ip_addresses(self, input: Option<Vec<String>>) -> Self
pub fn set_ip_addresses(self, input: Option<Vec<String>>) -> Self
Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose IP addresses from your own pool to use for the accelerator's static IP addresses when you create an accelerator. You can specify one or two addresses, separated by a space. Do not include the /32 suffix.
Only one IP address from each of your IP address ranges can be used for each accelerator. If you specify only one IP address from your IP address range, Global Accelerator assigns a second static IP address for the accelerator from the AWS IP address pool.
Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses.
For more information, see Bring your own IP addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
sourcepub fn enabled(self, input: bool) -> Self
pub fn enabled(self, input: bool) -> Self
Indicates whether an accelerator is enabled. The value is true or false. The default value is true.
If the value is set to true, an accelerator cannot be deleted. If set to false, the accelerator can be deleted.
sourcepub fn set_enabled(self, input: Option<bool>) -> Self
pub fn set_enabled(self, input: Option<bool>) -> Self
Indicates whether an accelerator is enabled. The value is true or false. The default value is true.
If the value is set to true, an accelerator cannot be deleted. If set to false, the accelerator can be deleted.
sourcepub fn idempotency_token(self, input: impl Into<String>) -> Self
pub fn idempotency_token(self, input: impl Into<String>) -> Self
A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.
sourcepub fn set_idempotency_token(self, input: Option<String>) -> Self
pub fn set_idempotency_token(self, input: Option<String>) -> Self
A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.
Appends an item to Tags
.
To override the contents of this collection use set_tags
.
Create tags for an accelerator.
For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.
Create tags for an accelerator.
For more information, see Tagging in AWS Global Accelerator in the AWS Global Accelerator Developer Guide.
Trait Implementations
sourceimpl Clone for CreateCustomRoutingAccelerator
impl Clone for CreateCustomRoutingAccelerator
sourcefn clone(&self) -> CreateCustomRoutingAccelerator
fn clone(&self) -> CreateCustomRoutingAccelerator
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
Auto Trait Implementations
impl !RefUnwindSafe for CreateCustomRoutingAccelerator
impl Send for CreateCustomRoutingAccelerator
impl Sync for CreateCustomRoutingAccelerator
impl Unpin for CreateCustomRoutingAccelerator
impl !UnwindSafe for CreateCustomRoutingAccelerator
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more