#[non_exhaustive]pub struct CreateEndpointGroupInput {
pub listener_arn: Option<String>,
pub endpoint_group_region: Option<String>,
pub endpoint_configurations: Option<Vec<EndpointConfiguration>>,
pub traffic_dial_percentage: Option<f32>,
pub health_check_port: Option<i32>,
pub health_check_protocol: Option<HealthCheckProtocol>,
pub health_check_path: Option<String>,
pub health_check_interval_seconds: Option<i32>,
pub threshold_count: Option<i32>,
pub idempotency_token: Option<String>,
pub port_overrides: Option<Vec<PortOverride>>,
}
Fields (Non-exhaustive)
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.listener_arn: Option<String>
The Amazon Resource Name (ARN) of the listener.
endpoint_group_region: Option<String>
The AWS Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.
endpoint_configurations: Option<Vec<EndpointConfiguration>>
The list of endpoint objects.
traffic_dial_percentage: Option<f32>
The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.
Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.
The default value is 100.
health_check_port: Option<i32>
The port that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If listener port is a list of ports, Global Accelerator uses the first port in the list.
health_check_protocol: Option<HealthCheckProtocol>
The protocol that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.
health_check_path: Option<String>
If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The default value is slash (/).
health_check_interval_seconds: Option<i32>
The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.
threshold_count: Option<i32>
The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.
idempotency_token: Option<String>
A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.
port_overrides: Option<Vec<PortOverride>>
Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.
For more information, see Port overrides in the AWS Global Accelerator Developer Guide.
Implementations
sourceimpl CreateEndpointGroupInput
impl CreateEndpointGroupInput
sourcepub async fn make_operation(
self,
_config: &Config
) -> Result<Operation<CreateEndpointGroup, AwsErrorRetryPolicy>, BuildError>
pub async fn make_operation(
self,
_config: &Config
) -> Result<Operation<CreateEndpointGroup, AwsErrorRetryPolicy>, BuildError>
Consumes the builder and constructs an Operation<CreateEndpointGroup
>
sourcepub fn builder() -> Builder
pub fn builder() -> Builder
Creates a new builder-style object to manufacture CreateEndpointGroupInput
sourceimpl CreateEndpointGroupInput
impl CreateEndpointGroupInput
sourcepub fn listener_arn(&self) -> Option<&str>
pub fn listener_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the listener.
sourcepub fn endpoint_group_region(&self) -> Option<&str>
pub fn endpoint_group_region(&self) -> Option<&str>
The AWS Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.
sourcepub fn endpoint_configurations(&self) -> Option<&[EndpointConfiguration]>
pub fn endpoint_configurations(&self) -> Option<&[EndpointConfiguration]>
The list of endpoint objects.
sourcepub fn traffic_dial_percentage(&self) -> Option<f32>
pub fn traffic_dial_percentage(&self) -> Option<f32>
The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.
Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.
The default value is 100.
sourcepub fn health_check_port(&self) -> Option<i32>
pub fn health_check_port(&self) -> Option<i32>
The port that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If listener port is a list of ports, Global Accelerator uses the first port in the list.
sourcepub fn health_check_protocol(&self) -> Option<&HealthCheckProtocol>
pub fn health_check_protocol(&self) -> Option<&HealthCheckProtocol>
The protocol that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.
sourcepub fn health_check_path(&self) -> Option<&str>
pub fn health_check_path(&self) -> Option<&str>
If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The default value is slash (/).
sourcepub fn health_check_interval_seconds(&self) -> Option<i32>
pub fn health_check_interval_seconds(&self) -> Option<i32>
The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.
sourcepub fn threshold_count(&self) -> Option<i32>
pub fn threshold_count(&self) -> Option<i32>
The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.
sourcepub fn idempotency_token(&self) -> Option<&str>
pub fn idempotency_token(&self) -> Option<&str>
A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.
sourcepub fn port_overrides(&self) -> Option<&[PortOverride]>
pub fn port_overrides(&self) -> Option<&[PortOverride]>
Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.
For more information, see Port overrides in the AWS Global Accelerator Developer Guide.
Trait Implementations
sourceimpl Clone for CreateEndpointGroupInput
impl Clone for CreateEndpointGroupInput
sourcefn clone(&self) -> CreateEndpointGroupInput
fn clone(&self) -> CreateEndpointGroupInput
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl Debug for CreateEndpointGroupInput
impl Debug for CreateEndpointGroupInput
sourceimpl PartialEq<CreateEndpointGroupInput> for CreateEndpointGroupInput
impl PartialEq<CreateEndpointGroupInput> for CreateEndpointGroupInput
sourcefn eq(&self, other: &CreateEndpointGroupInput) -> bool
fn eq(&self, other: &CreateEndpointGroupInput) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcefn ne(&self, other: &CreateEndpointGroupInput) -> bool
fn ne(&self, other: &CreateEndpointGroupInput) -> bool
This method tests for !=
.
impl StructuralPartialEq for CreateEndpointGroupInput
Auto Trait Implementations
impl RefUnwindSafe for CreateEndpointGroupInput
impl Send for CreateEndpointGroupInput
impl Sync for CreateEndpointGroupInput
impl Unpin for CreateEndpointGroupInput
impl UnwindSafe for CreateEndpointGroupInput
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more