Struct aws_sdk_fsx::operation::create_file_system::builders::CreateFileSystemFluentBuilder

source · 
pub struct CreateFileSystemFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to CreateFileSystem.

Creates a new, empty Amazon FSx file system. You can create the following supported Amazon FSx file systems using the CreateFileSystem API operation:

  • Amazon FSx for Lustre

  • Amazon FSx for NetApp ONTAP

  • Amazon FSx for OpenZFS

  • Amazon FSx for Windows File Server

This operation requires a client request token in the request that Amazon FSx uses to ensure idempotent creation. This means that calling the operation multiple times with the same client request token has no effect. By using the idempotent operation, you can retry a CreateFileSystem operation without the risk of creating an extra file system. This approach can be useful when an initial call fails in a way that makes it unclear whether a file system was created. Examples are if a transport level timeout occurred, or your connection was reset. If you use the same client request token and the initial call created a file system, the client receives success as long as the parameters are the same.

If a file system with the specified client request token exists and the parameters match, CreateFileSystem returns the description of the existing file system. If a file system with the specified client request token exists and the parameters don't match, this call returns IncompatibleParameterError. If a file system with the specified client request token doesn't exist, CreateFileSystem does the following:

  • Creates a new, empty Amazon FSx file system with an assigned ID, and an initial lifecycle state of CREATING.

  • Returns the description of the file system in JSON format.

The CreateFileSystem call returns while the file system's lifecycle state is still CREATING. You can check the file-system creation status by calling the DescribeFileSystems operation, which returns the file system state along with other information.

Implementations§

source§

impl CreateFileSystemFluentBuilder

source

pub fn as_input(&self) -> &CreateFileSystemInputBuilder

Access the CreateFileSystem as a reference.

source

pub async fn send( self ) -> Result<CreateFileSystemOutput, SdkError<CreateFileSystemError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

source

pub fn customize( self ) -> CustomizableOperation<CreateFileSystemOutput, CreateFileSystemError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

source

pub fn client_request_token(self, input: impl Into<String>) -> Self

A string of up to 63 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.

source

pub fn set_client_request_token(self, input: Option<String>) -> Self

A string of up to 63 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.

source

pub fn get_client_request_token(&self) -> &Option<String>

A string of up to 63 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.

source

pub fn file_system_type(self, input: FileSystemType) -> Self

The type of Amazon FSx file system to create. Valid values are WINDOWS, LUSTRE, ONTAP, and OPENZFS.

source

pub fn set_file_system_type(self, input: Option<FileSystemType>) -> Self

The type of Amazon FSx file system to create. Valid values are WINDOWS, LUSTRE, ONTAP, and OPENZFS.

source

pub fn get_file_system_type(&self) -> &Option<FileSystemType>

The type of Amazon FSx file system to create. Valid values are WINDOWS, LUSTRE, ONTAP, and OPENZFS.

source

pub fn storage_capacity(self, input: i32) -> Self

Sets the storage capacity of the file system that you're creating, in gibibytes (GiB).

FSx for Lustre file systems - The amount of storage capacity that you can configure depends on the value that you set for StorageType and the Lustre DeploymentType, as follows:

  • For SCRATCH_2, PERSISTENT_2 and PERSISTENT_1 deployment types using SSD storage type, the valid values are 1200 GiB, 2400 GiB, and increments of 2400 GiB.

  • For PERSISTENT_1 HDD file systems, valid values are increments of 6000 GiB for 12 MB/s/TiB file systems and increments of 1800 GiB for 40 MB/s/TiB file systems.

  • For SCRATCH_1 deployment type, valid values are 1200 GiB, 2400 GiB, and increments of 3600 GiB.

FSx for ONTAP file systems - The amount of storage capacity that you can configure depends on the value of the HAPairs property. The minimum value is calculated as 1,024 * HAPairs and the maximum is calculated as 524,288 * HAPairs.

FSx for OpenZFS file systems - The amount of storage capacity that you can configure is from 64 GiB up to 524,288 GiB (512 TiB).

FSx for Windows File Server file systems - The amount of storage capacity that you can configure depends on the value that you set for StorageType as follows:

  • For SSD storage, valid values are 32 GiB-65,536 GiB (64 TiB).

  • For HDD storage, valid values are 2000 GiB-65,536 GiB (64 TiB).

source

pub fn set_storage_capacity(self, input: Option<i32>) -> Self

Sets the storage capacity of the file system that you're creating, in gibibytes (GiB).

FSx for Lustre file systems - The amount of storage capacity that you can configure depends on the value that you set for StorageType and the Lustre DeploymentType, as follows:

  • For SCRATCH_2, PERSISTENT_2 and PERSISTENT_1 deployment types using SSD storage type, the valid values are 1200 GiB, 2400 GiB, and increments of 2400 GiB.

  • For PERSISTENT_1 HDD file systems, valid values are increments of 6000 GiB for 12 MB/s/TiB file systems and increments of 1800 GiB for 40 MB/s/TiB file systems.

  • For SCRATCH_1 deployment type, valid values are 1200 GiB, 2400 GiB, and increments of 3600 GiB.

FSx for ONTAP file systems - The amount of storage capacity that you can configure depends on the value of the HAPairs property. The minimum value is calculated as 1,024 * HAPairs and the maximum is calculated as 524,288 * HAPairs.

FSx for OpenZFS file systems - The amount of storage capacity that you can configure is from 64 GiB up to 524,288 GiB (512 TiB).

FSx for Windows File Server file systems - The amount of storage capacity that you can configure depends on the value that you set for StorageType as follows:

  • For SSD storage, valid values are 32 GiB-65,536 GiB (64 TiB).

  • For HDD storage, valid values are 2000 GiB-65,536 GiB (64 TiB).

source

pub fn get_storage_capacity(&self) -> &Option<i32>

Sets the storage capacity of the file system that you're creating, in gibibytes (GiB).

FSx for Lustre file systems - The amount of storage capacity that you can configure depends on the value that you set for StorageType and the Lustre DeploymentType, as follows:

  • For SCRATCH_2, PERSISTENT_2 and PERSISTENT_1 deployment types using SSD storage type, the valid values are 1200 GiB, 2400 GiB, and increments of 2400 GiB.

  • For PERSISTENT_1 HDD file systems, valid values are increments of 6000 GiB for 12 MB/s/TiB file systems and increments of 1800 GiB for 40 MB/s/TiB file systems.

  • For SCRATCH_1 deployment type, valid values are 1200 GiB, 2400 GiB, and increments of 3600 GiB.

FSx for ONTAP file systems - The amount of storage capacity that you can configure depends on the value of the HAPairs property. The minimum value is calculated as 1,024 * HAPairs and the maximum is calculated as 524,288 * HAPairs.

FSx for OpenZFS file systems - The amount of storage capacity that you can configure is from 64 GiB up to 524,288 GiB (512 TiB).

FSx for Windows File Server file systems - The amount of storage capacity that you can configure depends on the value that you set for StorageType as follows:

  • For SSD storage, valid values are 32 GiB-65,536 GiB (64 TiB).

  • For HDD storage, valid values are 2000 GiB-65,536 GiB (64 TiB).

source

pub fn storage_type(self, input: StorageType) -> Self

Sets the storage type for the file system that you're creating. Valid values are SSD and HDD.

  • Set to SSD to use solid state drive storage. SSD is supported on all Windows, Lustre, ONTAP, and OpenZFS deployment types.

  • Set to HDD to use hard disk drive storage. HDD is supported on SINGLE_AZ_2 and MULTI_AZ_1 Windows file system deployment types, and on PERSISTENT_1 Lustre file system deployment types.

Default value is SSD. For more information, see Storage type options in the FSx for Windows File Server User Guide and Multiple storage options in the FSx for Lustre User Guide.

source

pub fn set_storage_type(self, input: Option<StorageType>) -> Self

Sets the storage type for the file system that you're creating. Valid values are SSD and HDD.

  • Set to SSD to use solid state drive storage. SSD is supported on all Windows, Lustre, ONTAP, and OpenZFS deployment types.

  • Set to HDD to use hard disk drive storage. HDD is supported on SINGLE_AZ_2 and MULTI_AZ_1 Windows file system deployment types, and on PERSISTENT_1 Lustre file system deployment types.

Default value is SSD. For more information, see Storage type options in the FSx for Windows File Server User Guide and Multiple storage options in the FSx for Lustre User Guide.

source

pub fn get_storage_type(&self) -> &Option<StorageType>

Sets the storage type for the file system that you're creating. Valid values are SSD and HDD.

  • Set to SSD to use solid state drive storage. SSD is supported on all Windows, Lustre, ONTAP, and OpenZFS deployment types.

  • Set to HDD to use hard disk drive storage. HDD is supported on SINGLE_AZ_2 and MULTI_AZ_1 Windows file system deployment types, and on PERSISTENT_1 Lustre file system deployment types.

Default value is SSD. For more information, see Storage type options in the FSx for Windows File Server User Guide and Multiple storage options in the FSx for Lustre User Guide.

source

pub fn subnet_ids(self, input: impl Into<String>) -> Self

Appends an item to SubnetIds.

To override the contents of this collection use set_subnet_ids.

Specifies the IDs of the subnets that the file system will be accessible from. For Windows and ONTAP MULTI_AZ_1 deployment types,provide exactly two subnet IDs, one for the preferred file server and one for the standby file server. You specify one of these subnets as the preferred subnet using the WindowsConfiguration > PreferredSubnetID or OntapConfiguration > PreferredSubnetID properties. For more information about Multi-AZ file system configuration, see Availability and durability: Single-AZ and Multi-AZ file systems in the Amazon FSx for Windows User Guide and Availability and durability in the Amazon FSx for ONTAP User Guide.

For Windows SINGLE_AZ_1 and SINGLE_AZ_2 and all Lustre deployment types, provide exactly one subnet ID. The file server is launched in that subnet's Availability Zone.

source

pub fn set_subnet_ids(self, input: Option<Vec<String>>) -> Self

Specifies the IDs of the subnets that the file system will be accessible from. For Windows and ONTAP MULTI_AZ_1 deployment types,provide exactly two subnet IDs, one for the preferred file server and one for the standby file server. You specify one of these subnets as the preferred subnet using the WindowsConfiguration > PreferredSubnetID or OntapConfiguration > PreferredSubnetID properties. For more information about Multi-AZ file system configuration, see Availability and durability: Single-AZ and Multi-AZ file systems in the Amazon FSx for Windows User Guide and Availability and durability in the Amazon FSx for ONTAP User Guide.

For Windows SINGLE_AZ_1 and SINGLE_AZ_2 and all Lustre deployment types, provide exactly one subnet ID. The file server is launched in that subnet's Availability Zone.

source

pub fn get_subnet_ids(&self) -> &Option<Vec<String>>

Specifies the IDs of the subnets that the file system will be accessible from. For Windows and ONTAP MULTI_AZ_1 deployment types,provide exactly two subnet IDs, one for the preferred file server and one for the standby file server. You specify one of these subnets as the preferred subnet using the WindowsConfiguration > PreferredSubnetID or OntapConfiguration > PreferredSubnetID properties. For more information about Multi-AZ file system configuration, see Availability and durability: Single-AZ and Multi-AZ file systems in the Amazon FSx for Windows User Guide and Availability and durability in the Amazon FSx for ONTAP User Guide.

For Windows SINGLE_AZ_1 and SINGLE_AZ_2 and all Lustre deployment types, provide exactly one subnet ID. The file server is launched in that subnet's Availability Zone.

source

pub fn security_group_ids(self, input: impl Into<String>) -> Self

Appends an item to SecurityGroupIds.

To override the contents of this collection use set_security_group_ids.

A list of IDs specifying the security groups to apply to all network interfaces created for file system access. This list isn't returned in later requests to describe the file system.

You must specify a security group if you are creating a Multi-AZ FSx for ONTAP file system in a VPC subnet that has been shared with you.

source

pub fn set_security_group_ids(self, input: Option<Vec<String>>) -> Self

A list of IDs specifying the security groups to apply to all network interfaces created for file system access. This list isn't returned in later requests to describe the file system.

You must specify a security group if you are creating a Multi-AZ FSx for ONTAP file system in a VPC subnet that has been shared with you.

source

pub fn get_security_group_ids(&self) -> &Option<Vec<String>>

A list of IDs specifying the security groups to apply to all network interfaces created for file system access. This list isn't returned in later requests to describe the file system.

You must specify a security group if you are creating a Multi-AZ FSx for ONTAP file system in a VPC subnet that has been shared with you.

source

pub fn tags(self, input: Tag) -> Self

Appends an item to Tags.

To override the contents of this collection use set_tags.

The tags to apply to the file system that's being created. The key value of the Name tag appears in the console as the file system name.

source

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

The tags to apply to the file system that's being created. The key value of the Name tag appears in the console as the file system name.

source

pub fn get_tags(&self) -> &Option<Vec<Tag>>

The tags to apply to the file system that's being created. The key value of the Name tag appears in the console as the file system name.

source

pub fn kms_key_id(self, input: impl Into<String>) -> Self

Specifies the ID of the Key Management Service (KMS) key to use for encrypting data on Amazon FSx file systems, as follows:

  • Amazon FSx for Lustre PERSISTENT_1 and PERSISTENT_2 deployment types only.

    SCRATCH_1 and SCRATCH_2 types are encrypted using the Amazon FSx service KMS key for your account.

  • Amazon FSx for NetApp ONTAP

  • Amazon FSx for OpenZFS

  • Amazon FSx for Windows File Server

If a KmsKeyId isn't specified, the Amazon FSx-managed KMS key for your account is used. For more information, see Encrypt in the Key Management Service API Reference.

source

pub fn set_kms_key_id(self, input: Option<String>) -> Self

Specifies the ID of the Key Management Service (KMS) key to use for encrypting data on Amazon FSx file systems, as follows:

  • Amazon FSx for Lustre PERSISTENT_1 and PERSISTENT_2 deployment types only.

    SCRATCH_1 and SCRATCH_2 types are encrypted using the Amazon FSx service KMS key for your account.

  • Amazon FSx for NetApp ONTAP

  • Amazon FSx for OpenZFS

  • Amazon FSx for Windows File Server

If a KmsKeyId isn't specified, the Amazon FSx-managed KMS key for your account is used. For more information, see Encrypt in the Key Management Service API Reference.

source

pub fn get_kms_key_id(&self) -> &Option<String>

Specifies the ID of the Key Management Service (KMS) key to use for encrypting data on Amazon FSx file systems, as follows:

  • Amazon FSx for Lustre PERSISTENT_1 and PERSISTENT_2 deployment types only.

    SCRATCH_1 and SCRATCH_2 types are encrypted using the Amazon FSx service KMS key for your account.

  • Amazon FSx for NetApp ONTAP

  • Amazon FSx for OpenZFS

  • Amazon FSx for Windows File Server

If a KmsKeyId isn't specified, the Amazon FSx-managed KMS key for your account is used. For more information, see Encrypt in the Key Management Service API Reference.

source

pub fn windows_configuration( self, input: CreateFileSystemWindowsConfiguration ) -> Self

The Microsoft Windows configuration for the file system that's being created.

source

pub fn set_windows_configuration( self, input: Option<CreateFileSystemWindowsConfiguration> ) -> Self

The Microsoft Windows configuration for the file system that's being created.

source

pub fn get_windows_configuration( &self ) -> &Option<CreateFileSystemWindowsConfiguration>

The Microsoft Windows configuration for the file system that's being created.

source

pub fn lustre_configuration( self, input: CreateFileSystemLustreConfiguration ) -> Self

The Lustre configuration for the file system being created.

The following parameters are not supported for file systems with a data repository association created with .

  • AutoImportPolicy

  • ExportPath

  • ImportedFileChunkSize

  • ImportPath

source

pub fn set_lustre_configuration( self, input: Option<CreateFileSystemLustreConfiguration> ) -> Self

The Lustre configuration for the file system being created.

The following parameters are not supported for file systems with a data repository association created with .

  • AutoImportPolicy

  • ExportPath

  • ImportedFileChunkSize

  • ImportPath

source

pub fn get_lustre_configuration( &self ) -> &Option<CreateFileSystemLustreConfiguration>

The Lustre configuration for the file system being created.

The following parameters are not supported for file systems with a data repository association created with .

  • AutoImportPolicy

  • ExportPath

  • ImportedFileChunkSize

  • ImportPath

source

pub fn ontap_configuration( self, input: CreateFileSystemOntapConfiguration ) -> Self

The ONTAP configuration properties of the FSx for ONTAP file system that you are creating.

source

pub fn set_ontap_configuration( self, input: Option<CreateFileSystemOntapConfiguration> ) -> Self

The ONTAP configuration properties of the FSx for ONTAP file system that you are creating.

source

pub fn get_ontap_configuration( &self ) -> &Option<CreateFileSystemOntapConfiguration>

The ONTAP configuration properties of the FSx for ONTAP file system that you are creating.

source

pub fn file_system_type_version(self, input: impl Into<String>) -> Self

(Optional) For FSx for Lustre file systems, sets the Lustre version for the file system that you're creating. Valid values are 2.10, 2.12, and 2.15:

  • 2.10 is supported by the Scratch and Persistent_1 Lustre deployment types.

  • 2.12 and 2.15 are supported by all Lustre deployment types. 2.12 or 2.15 is required when setting FSx for Lustre DeploymentType to PERSISTENT_2.

Default value = 2.10, except when DeploymentType is set to PERSISTENT_2, then the default is 2.12.

If you set FileSystemTypeVersion to 2.10 for a PERSISTENT_2 Lustre deployment type, the CreateFileSystem operation fails.

source

pub fn set_file_system_type_version(self, input: Option<String>) -> Self

(Optional) For FSx for Lustre file systems, sets the Lustre version for the file system that you're creating. Valid values are 2.10, 2.12, and 2.15:

  • 2.10 is supported by the Scratch and Persistent_1 Lustre deployment types.

  • 2.12 and 2.15 are supported by all Lustre deployment types. 2.12 or 2.15 is required when setting FSx for Lustre DeploymentType to PERSISTENT_2.

Default value = 2.10, except when DeploymentType is set to PERSISTENT_2, then the default is 2.12.

If you set FileSystemTypeVersion to 2.10 for a PERSISTENT_2 Lustre deployment type, the CreateFileSystem operation fails.

source

pub fn get_file_system_type_version(&self) -> &Option<String>

(Optional) For FSx for Lustre file systems, sets the Lustre version for the file system that you're creating. Valid values are 2.10, 2.12, and 2.15:

  • 2.10 is supported by the Scratch and Persistent_1 Lustre deployment types.

  • 2.12 and 2.15 are supported by all Lustre deployment types. 2.12 or 2.15 is required when setting FSx for Lustre DeploymentType to PERSISTENT_2.

Default value = 2.10, except when DeploymentType is set to PERSISTENT_2, then the default is 2.12.

If you set FileSystemTypeVersion to 2.10 for a PERSISTENT_2 Lustre deployment type, the CreateFileSystem operation fails.

source

pub fn open_zfs_configuration( self, input: CreateFileSystemOpenZfsConfiguration ) -> Self

The OpenZFS configuration for the file system that's being created.

source

pub fn set_open_zfs_configuration( self, input: Option<CreateFileSystemOpenZfsConfiguration> ) -> Self

The OpenZFS configuration for the file system that's being created.

source

pub fn get_open_zfs_configuration( &self ) -> &Option<CreateFileSystemOpenZfsConfiguration>

The OpenZFS configuration for the file system that's being created.

Trait Implementations§

source§

impl Clone for CreateFileSystemFluentBuilder

source§

fn clone(&self) -> CreateFileSystemFluentBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for CreateFileSystemFluentBuilder

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more