// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

/// <p>The request object used to create a new Amazon FSx file system.</p>
#[non_exhaustive]
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::fmt::Debug)]
pub struct CreateFileSystemInput {
    /// <p>A string of up to 63 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.</p>
    pub client_request_token: ::std::option::Option<::std::string::String>,
    /// <p>The type of Amazon FSx file system to create. Valid values are <code>WINDOWS</code>, <code>LUSTRE</code>, <code>ONTAP</code>, and <code>OPENZFS</code>.</p>
    pub file_system_type: ::std::option::Option<crate::types::FileSystemType>,
    /// <p>Sets the storage capacity of the file system that you're creating, in gibibytes (GiB).</p>
    /// <p><b>FSx for Lustre file systems</b> - The amount of storage capacity that you can configure depends on the value that you set for <code>StorageType</code> and the Lustre <code>DeploymentType</code>, as follows:</p>
    /// <ul>
    /// <li>
    /// <p>For <code>SCRATCH_2</code>, <code>PERSISTENT_2</code> and <code>PERSISTENT_1</code> deployment types using SSD storage type, the valid values are 1200 GiB, 2400 GiB, and increments of 2400 GiB.</p></li>
    /// <li>
    /// <p>For <code>PERSISTENT_1</code> HDD file systems, valid values are increments of 6000 GiB for 12 MB/s/TiB file systems and increments of 1800 GiB for 40 MB/s/TiB file systems.</p></li>
    /// <li>
    /// <p>For <code>SCRATCH_1</code> deployment type, valid values are 1200 GiB, 2400 GiB, and increments of 3600 GiB.</p></li>
    /// </ul>
    /// <p><b>FSx for ONTAP file systems</b> - The amount of storage capacity that you can configure depends on the value of the <code>HAPairs</code> property. The minimum value is calculated as 1,024 * <code>HAPairs</code> and the maximum is calculated as 524,288 * <code>HAPairs</code>.</p>
    /// <p><b>FSx for OpenZFS file systems</b> - The amount of storage capacity that you can configure is from 64 GiB up to 524,288 GiB (512 TiB).</p>
    /// <p><b>FSx for Windows File Server file systems</b> - The amount of storage capacity that you can configure depends on the value that you set for <code>StorageType</code> as follows:</p>
    /// <ul>
    /// <li>
    /// <p>For SSD storage, valid values are 32 GiB-65,536 GiB (64 TiB).</p></li>
    /// <li>
    /// <p>For HDD storage, valid values are 2000 GiB-65,536 GiB (64 TiB).</p></li>
    /// </ul>
    pub storage_capacity: ::std::option::Option<i32>,
    /// <p>Sets the storage type for the file system that you're creating. Valid values are <code>SSD</code> and <code>HDD</code>.</p>
    /// <ul>
    /// <li>
    /// <p>Set to <code>SSD</code> to use solid state drive storage. SSD is supported on all Windows, Lustre, ONTAP, and OpenZFS deployment types.</p></li>
    /// <li>
    /// <p>Set to <code>HDD</code> to use hard disk drive storage. HDD is supported on <code>SINGLE_AZ_2</code> and <code>MULTI_AZ_1</code> Windows file system deployment types, and on <code>PERSISTENT_1</code> Lustre file system deployment types.</p></li>
    /// </ul>
    /// <p>Default value is <code>SSD</code>. For more information, see <a href="https://docs.aws.amazon.com/fsx/latest/WindowsGuide/optimize-fsx-costs.html#storage-type-options"> Storage type options</a> in the <i>FSx for Windows File Server User Guide</i> and <a href="https://docs.aws.amazon.com/fsx/latest/LustreGuide/what-is.html#storage-options">Multiple storage options</a> in the <i>FSx for Lustre User Guide</i>.</p>
    pub storage_type: ::std::option::Option<crate::types::StorageType>,
    /// <p>Specifies the IDs of the subnets that the file system will be accessible from. For Windows and ONTAP <code>MULTI_AZ_1</code> deployment types,provide exactly two subnet IDs, one for the preferred file server and one for the standby file server. You specify one of these subnets as the preferred subnet using the <code>WindowsConfiguration &gt; PreferredSubnetID</code> or <code>OntapConfiguration &gt; PreferredSubnetID</code> properties. For more information about Multi-AZ file system configuration, see <a href="https://docs.aws.amazon.com/fsx/latest/WindowsGuide/high-availability-multiAZ.html"> Availability and durability: Single-AZ and Multi-AZ file systems</a> in the <i>Amazon FSx for Windows User Guide</i> and <a href="https://docs.aws.amazon.com/fsx/latest/ONTAPGuide/high-availability-multiAZ.html"> Availability and durability</a> in the <i>Amazon FSx for ONTAP User Guide</i>.</p>
    /// <p>For Windows <code>SINGLE_AZ_1</code> and <code>SINGLE_AZ_2</code> and all Lustre deployment types, provide exactly one subnet ID. The file server is launched in that subnet's Availability Zone.</p>
    pub subnet_ids: ::std::option::Option<::std::vec::Vec<::std::string::String>>,
    /// <p>A list of IDs specifying the security groups to apply to all network interfaces created for file system access. This list isn't returned in later requests to describe the file system.</p><important>
    /// <p>You must specify a security group if you are creating a Multi-AZ FSx for ONTAP file system in a VPC subnet that has been shared with you.</p>
    /// </important>
    pub security_group_ids: ::std::option::Option<::std::vec::Vec<::std::string::String>>,
    /// <p>The tags to apply to the file system that's being created. The key value of the <code>Name</code> tag appears in the console as the file system name.</p>
    pub tags: ::std::option::Option<::std::vec::Vec<crate::types::Tag>>,
    /// <p>Specifies the ID of the Key Management Service (KMS) key to use for encrypting data on Amazon FSx file systems, as follows:</p>
    /// <ul>
    /// <li>
    /// <p>Amazon FSx for Lustre <code>PERSISTENT_1</code> and <code>PERSISTENT_2</code> deployment types only.</p>
    /// <p><code>SCRATCH_1</code> and <code>SCRATCH_2</code> types are encrypted using the Amazon FSx service KMS key for your account.</p></li>
    /// <li>
    /// <p>Amazon FSx for NetApp ONTAP</p></li>
    /// <li>
    /// <p>Amazon FSx for OpenZFS</p></li>
    /// <li>
    /// <p>Amazon FSx for Windows File Server</p></li>
    /// </ul>
    /// <p>If a <code>KmsKeyId</code> isn't specified, the Amazon FSx-managed KMS key for your account is used. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_Encrypt.html">Encrypt</a> in the <i>Key Management Service API Reference</i>.</p>
    pub kms_key_id: ::std::option::Option<::std::string::String>,
    /// <p>The Microsoft Windows configuration for the file system that's being created.</p>
    pub windows_configuration: ::std::option::Option<crate::types::CreateFileSystemWindowsConfiguration>,
    /// <p>The Lustre configuration for the file system being created.</p><note>
    /// <p>The following parameters are not supported for file systems with a data repository association created with .</p>
    /// <ul>
    /// <li>
    /// <p><code>AutoImportPolicy</code></p></li>
    /// <li>
    /// <p><code>ExportPath</code></p></li>
    /// <li>
    /// <p><code>ImportedFileChunkSize</code></p></li>
    /// <li>
    /// <p><code>ImportPath</code></p></li>
    /// </ul>
    /// </note>
    pub lustre_configuration: ::std::option::Option<crate::types::CreateFileSystemLustreConfiguration>,
    /// <p>The ONTAP configuration properties of the FSx for ONTAP file system that you are creating.</p>
    pub ontap_configuration: ::std::option::Option<crate::types::CreateFileSystemOntapConfiguration>,
    /// <p>(Optional) For FSx for Lustre file systems, sets the Lustre version for the file system that you're creating. Valid values are <code>2.10</code>, <code>2.12</code>, and <code>2.15</code>:</p>
    /// <ul>
    /// <li>
    /// <p>2.10 is supported by the Scratch and Persistent_1 Lustre deployment types.</p></li>
    /// <li>
    /// <p>2.12 and 2.15 are supported by all Lustre deployment types. <code>2.12</code> or <code>2.15</code> is required when setting FSx for Lustre <code>DeploymentType</code> to <code>PERSISTENT_2</code>.</p></li>
    /// </ul>
    /// <p>Default value = <code>2.10</code>, except when <code>DeploymentType</code> is set to <code>PERSISTENT_2</code>, then the default is <code>2.12</code>.</p><note>
    /// <p>If you set <code>FileSystemTypeVersion</code> to <code>2.10</code> for a <code>PERSISTENT_2</code> Lustre deployment type, the <code>CreateFileSystem</code> operation fails.</p>
    /// </note>
    pub file_system_type_version: ::std::option::Option<::std::string::String>,
    /// <p>The OpenZFS configuration for the file system that's being created.</p>
    pub open_zfs_configuration: ::std::option::Option<crate::types::CreateFileSystemOpenZfsConfiguration>,
}
impl CreateFileSystemInput {
    /// <p>A string of up to 63 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.</p>
    pub fn client_request_token(&self) -> ::std::option::Option<&str> {
        self.client_request_token.as_deref()
    }
    /// <p>The type of Amazon FSx file system to create. Valid values are <code>WINDOWS</code>, <code>LUSTRE</code>, <code>ONTAP</code>, and <code>OPENZFS</code>.</p>
    pub fn file_system_type(&self) -> ::std::option::Option<&crate::types::FileSystemType> {
        self.file_system_type.as_ref()
    }
    /// <p>Sets the storage capacity of the file system that you're creating, in gibibytes (GiB).</p>
    /// <p><b>FSx for Lustre file systems</b> - The amount of storage capacity that you can configure depends on the value that you set for <code>StorageType</code> and the Lustre <code>DeploymentType</code>, as follows:</p>
    /// <ul>
    /// <li>
    /// <p>For <code>SCRATCH_2</code>, <code>PERSISTENT_2</code> and <code>PERSISTENT_1</code> deployment types using SSD storage type, the valid values are 1200 GiB, 2400 GiB, and increments of 2400 GiB.</p></li>
    /// <li>
    /// <p>For <code>PERSISTENT_1</code> HDD file systems, valid values are increments of 6000 GiB for 12 MB/s/TiB file systems and increments of 1800 GiB for 40 MB/s/TiB file systems.</p></li>
    /// <li>
    /// <p>For <code>SCRATCH_1</code> deployment type, valid values are 1200 GiB, 2400 GiB, and increments of 3600 GiB.</p></li>
    /// </ul>
    /// <p><b>FSx for ONTAP file systems</b> - The amount of storage capacity that you can configure depends on the value of the <code>HAPairs</code> property. The minimum value is calculated as 1,024 * <code>HAPairs</code> and the maximum is calculated as 524,288 * <code>HAPairs</code>.</p>
    /// <p><b>FSx for OpenZFS file systems</b> - The amount of storage capacity that you can configure is from 64 GiB up to 524,288 GiB (512 TiB).</p>
    /// <p><b>FSx for Windows File Server file systems</b> - The amount of storage capacity that you can configure depends on the value that you set for <code>StorageType</code> as follows:</p>
    /// <ul>
    /// <li>
    /// <p>For SSD storage, valid values are 32 GiB-65,536 GiB (64 TiB).</p></li>
    /// <li>
    /// <p>For HDD storage, valid values are 2000 GiB-65,536 GiB (64 TiB).</p></li>
    /// </ul>
    pub fn storage_capacity(&self) -> ::std::option::Option<i32> {
        self.storage_capacity
    }
    /// <p>Sets the storage type for the file system that you're creating. Valid values are <code>SSD</code> and <code>HDD</code>.</p>
    /// <ul>
    /// <li>
    /// <p>Set to <code>SSD</code> to use solid state drive storage. SSD is supported on all Windows, Lustre, ONTAP, and OpenZFS deployment types.</p></li>
    /// <li>
    /// <p>Set to <code>HDD</code> to use hard disk drive storage. HDD is supported on <code>SINGLE_AZ_2</code> and <code>MULTI_AZ_1</code> Windows file system deployment types, and on <code>PERSISTENT_1</code> Lustre file system deployment types.</p></li>
    /// </ul>
    /// <p>Default value is <code>SSD</code>. For more information, see <a href="https://docs.aws.amazon.com/fsx/latest/WindowsGuide/optimize-fsx-costs.html#storage-type-options"> Storage type options</a> in the <i>FSx for Windows File Server User Guide</i> and <a href="https://docs.aws.amazon.com/fsx/latest/LustreGuide/what-is.html#storage-options">Multiple storage options</a> in the <i>FSx for Lustre User Guide</i>.</p>
    pub fn storage_type(&self) -> ::std::option::Option<&crate::types::StorageType> {
        self.storage_type.as_ref()
    }
    /// <p>Specifies the IDs of the subnets that the file system will be accessible from. For Windows and ONTAP <code>MULTI_AZ_1</code> deployment types,provide exactly two subnet IDs, one for the preferred file server and one for the standby file server. You specify one of these subnets as the preferred subnet using the <code>WindowsConfiguration &gt; PreferredSubnetID</code> or <code>OntapConfiguration &gt; PreferredSubnetID</code> properties. For more information about Multi-AZ file system configuration, see <a href="https://docs.aws.amazon.com/fsx/latest/WindowsGuide/high-availability-multiAZ.html"> Availability and durability: Single-AZ and Multi-AZ file systems</a> in the <i>Amazon FSx for Windows User Guide</i> and <a href="https://docs.aws.amazon.com/fsx/latest/ONTAPGuide/high-availability-multiAZ.html"> Availability and durability</a> in the <i>Amazon FSx for ONTAP User Guide</i>.</p>
    /// <p>For Windows <code>SINGLE_AZ_1</code> and <code>SINGLE_AZ_2</code> and all Lustre deployment types, provide exactly one subnet ID. The file server is launched in that subnet's Availability Zone.</p>
    ///
    /// If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use `.subnet_ids.is_none()`.
    pub fn subnet_ids(&self) -> &[::std::string::String] {
        self.subnet_ids.as_deref().unwrap_or_default()
    }
    /// <p>A list of IDs specifying the security groups to apply to all network interfaces created for file system access. This list isn't returned in later requests to describe the file system.</p><important>
    /// <p>You must specify a security group if you are creating a Multi-AZ FSx for ONTAP file system in a VPC subnet that has been shared with you.</p>
    /// </important>
    ///
    /// If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use `.security_group_ids.is_none()`.
    pub fn security_group_ids(&self) -> &[::std::string::String] {
        self.security_group_ids.as_deref().unwrap_or_default()
    }
    /// <p>The tags to apply to the file system that's being created. The key value of the <code>Name</code> tag appears in the console as the file system name.</p>
    ///
    /// If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use `.tags.is_none()`.
    pub fn tags(&self) -> &[crate::types::Tag] {
        self.tags.as_deref().unwrap_or_default()
    }
    /// <p>Specifies the ID of the Key Management Service (KMS) key to use for encrypting data on Amazon FSx file systems, as follows:</p>
    /// <ul>
    /// <li>
    /// <p>Amazon FSx for Lustre <code>PERSISTENT_1</code> and <code>PERSISTENT_2</code> deployment types only.</p>
    /// <p><code>SCRATCH_1</code> and <code>SCRATCH_2</code> types are encrypted using the Amazon FSx service KMS key for your account.</p></li>
    /// <li>
    /// <p>Amazon FSx for NetApp ONTAP</p></li>
    /// <li>
    /// <p>Amazon FSx for OpenZFS</p></li>
    /// <li>
    /// <p>Amazon FSx for Windows File Server</p></li>
    /// </ul>
    /// <p>If a <code>KmsKeyId</code> isn't specified, the Amazon FSx-managed KMS key for your account is used. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_Encrypt.html">Encrypt</a> in the <i>Key Management Service API Reference</i>.</p>
    pub fn kms_key_id(&self) -> ::std::option::Option<&str> {
        self.kms_key_id.as_deref()
    }
    /// <p>The Microsoft Windows configuration for the file system that's being created.</p>
    pub fn windows_configuration(&self) -> ::std::option::Option<&crate::types::CreateFileSystemWindowsConfiguration> {
        self.windows_configuration.as_ref()
    }
    /// <p>The Lustre configuration for the file system being created.</p><note>
    /// <p>The following parameters are not supported for file systems with a data repository association created with .</p>
    /// <ul>
    /// <li>
    /// <p><code>AutoImportPolicy</code></p></li>
    /// <li>
    /// <p><code>ExportPath</code></p></li>
    /// <li>
    /// <p><code>ImportedFileChunkSize</code></p></li>
    /// <li>
    /// <p><code>ImportPath</code></p></li>
    /// </ul>
    /// </note>
    pub fn lustre_configuration(&self) -> ::std::option::Option<&crate::types::CreateFileSystemLustreConfiguration> {
        self.lustre_configuration.as_ref()
    }
    /// <p>The ONTAP configuration properties of the FSx for ONTAP file system that you are creating.</p>
    pub fn ontap_configuration(&self) -> ::std::option::Option<&crate::types::CreateFileSystemOntapConfiguration> {
        self.ontap_configuration.as_ref()
    }
    /// <p>(Optional) For FSx for Lustre file systems, sets the Lustre version for the file system that you're creating. Valid values are <code>2.10</code>, <code>2.12</code>, and <code>2.15</code>:</p>
    /// <ul>
    /// <li>
    /// <p>2.10 is supported by the Scratch and Persistent_1 Lustre deployment types.</p></li>
    /// <li>
    /// <p>2.12 and 2.15 are supported by all Lustre deployment types. <code>2.12</code> or <code>2.15</code> is required when setting FSx for Lustre <code>DeploymentType</code> to <code>PERSISTENT_2</code>.</p></li>
    /// </ul>
    /// <p>Default value = <code>2.10</code>, except when <code>DeploymentType</code> is set to <code>PERSISTENT_2</code>, then the default is <code>2.12</code>.</p><note>
    /// <p>If you set <code>FileSystemTypeVersion</code> to <code>2.10</code> for a <code>PERSISTENT_2</code> Lustre deployment type, the <code>CreateFileSystem</code> operation fails.</p>
    /// </note>
    pub fn file_system_type_version(&self) -> ::std::option::Option<&str> {
        self.file_system_type_version.as_deref()
    }
    /// <p>The OpenZFS configuration for the file system that's being created.</p>
    pub fn open_zfs_configuration(&self) -> ::std::option::Option<&crate::types::CreateFileSystemOpenZfsConfiguration> {
        self.open_zfs_configuration.as_ref()
    }
}
impl CreateFileSystemInput {
    /// Creates a new builder-style object to manufacture [`CreateFileSystemInput`](crate::operation::create_file_system::CreateFileSystemInput).
    pub fn builder() -> crate::operation::create_file_system::builders::CreateFileSystemInputBuilder {
        crate::operation::create_file_system::builders::CreateFileSystemInputBuilder::default()
    }
}

/// A builder for [`CreateFileSystemInput`](crate::operation::create_file_system::CreateFileSystemInput).
#[non_exhaustive]
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default, ::std::fmt::Debug)]
pub struct CreateFileSystemInputBuilder {
    pub(crate) client_request_token: ::std::option::Option<::std::string::String>,
    pub(crate) file_system_type: ::std::option::Option<crate::types::FileSystemType>,
    pub(crate) storage_capacity: ::std::option::Option<i32>,
    pub(crate) storage_type: ::std::option::Option<crate::types::StorageType>,
    pub(crate) subnet_ids: ::std::option::Option<::std::vec::Vec<::std::string::String>>,
    pub(crate) security_group_ids: ::std::option::Option<::std::vec::Vec<::std::string::String>>,
    pub(crate) tags: ::std::option::Option<::std::vec::Vec<crate::types::Tag>>,
    pub(crate) kms_key_id: ::std::option::Option<::std::string::String>,
    pub(crate) windows_configuration: ::std::option::Option<crate::types::CreateFileSystemWindowsConfiguration>,
    pub(crate) lustre_configuration: ::std::option::Option<crate::types::CreateFileSystemLustreConfiguration>,
    pub(crate) ontap_configuration: ::std::option::Option<crate::types::CreateFileSystemOntapConfiguration>,
    pub(crate) file_system_type_version: ::std::option::Option<::std::string::String>,
    pub(crate) open_zfs_configuration: ::std::option::Option<crate::types::CreateFileSystemOpenZfsConfiguration>,
}
impl CreateFileSystemInputBuilder {
    /// <p>A string of up to 63 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.</p>
    pub fn client_request_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.client_request_token = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>A string of up to 63 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.</p>
    pub fn set_client_request_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.client_request_token = input;
        self
    }
    /// <p>A string of up to 63 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the Command Line Interface (CLI) or an Amazon Web Services SDK.</p>
    pub fn get_client_request_token(&self) -> &::std::option::Option<::std::string::String> {
        &self.client_request_token
    }
    /// <p>The type of Amazon FSx file system to create. Valid values are <code>WINDOWS</code>, <code>LUSTRE</code>, <code>ONTAP</code>, and <code>OPENZFS</code>.</p>
    /// This field is required.
    pub fn file_system_type(mut self, input: crate::types::FileSystemType) -> Self {
        self.file_system_type = ::std::option::Option::Some(input);
        self
    }
    /// <p>The type of Amazon FSx file system to create. Valid values are <code>WINDOWS</code>, <code>LUSTRE</code>, <code>ONTAP</code>, and <code>OPENZFS</code>.</p>
    pub fn set_file_system_type(mut self, input: ::std::option::Option<crate::types::FileSystemType>) -> Self {
        self.file_system_type = input;
        self
    }
    /// <p>The type of Amazon FSx file system to create. Valid values are <code>WINDOWS</code>, <code>LUSTRE</code>, <code>ONTAP</code>, and <code>OPENZFS</code>.</p>
    pub fn get_file_system_type(&self) -> &::std::option::Option<crate::types::FileSystemType> {
        &self.file_system_type
    }
    /// <p>Sets the storage capacity of the file system that you're creating, in gibibytes (GiB).</p>
    /// <p><b>FSx for Lustre file systems</b> - The amount of storage capacity that you can configure depends on the value that you set for <code>StorageType</code> and the Lustre <code>DeploymentType</code>, as follows:</p>
    /// <ul>
    /// <li>
    /// <p>For <code>SCRATCH_2</code>, <code>PERSISTENT_2</code> and <code>PERSISTENT_1</code> deployment types using SSD storage type, the valid values are 1200 GiB, 2400 GiB, and increments of 2400 GiB.</p></li>
    /// <li>
    /// <p>For <code>PERSISTENT_1</code> HDD file systems, valid values are increments of 6000 GiB for 12 MB/s/TiB file systems and increments of 1800 GiB for 40 MB/s/TiB file systems.</p></li>
    /// <li>
    /// <p>For <code>SCRATCH_1</code> deployment type, valid values are 1200 GiB, 2400 GiB, and increments of 3600 GiB.</p></li>
    /// </ul>
    /// <p><b>FSx for ONTAP file systems</b> - The amount of storage capacity that you can configure depends on the value of the <code>HAPairs</code> property. The minimum value is calculated as 1,024 * <code>HAPairs</code> and the maximum is calculated as 524,288 * <code>HAPairs</code>.</p>
    /// <p><b>FSx for OpenZFS file systems</b> - The amount of storage capacity that you can configure is from 64 GiB up to 524,288 GiB (512 TiB).</p>
    /// <p><b>FSx for Windows File Server file systems</b> - The amount of storage capacity that you can configure depends on the value that you set for <code>StorageType</code> as follows:</p>
    /// <ul>
    /// <li>
    /// <p>For SSD storage, valid values are 32 GiB-65,536 GiB (64 TiB).</p></li>
    /// <li>
    /// <p>For HDD storage, valid values are 2000 GiB-65,536 GiB (64 TiB).</p></li>
    /// </ul>
    /// This field is required.
    pub fn storage_capacity(mut self, input: i32) -> Self {
        self.storage_capacity = ::std::option::Option::Some(input);
        self
    }
    /// <p>Sets the storage capacity of the file system that you're creating, in gibibytes (GiB).</p>
    /// <p><b>FSx for Lustre file systems</b> - The amount of storage capacity that you can configure depends on the value that you set for <code>StorageType</code> and the Lustre <code>DeploymentType</code>, as follows:</p>
    /// <ul>
    /// <li>
    /// <p>For <code>SCRATCH_2</code>, <code>PERSISTENT_2</code> and <code>PERSISTENT_1</code> deployment types using SSD storage type, the valid values are 1200 GiB, 2400 GiB, and increments of 2400 GiB.</p></li>
    /// <li>
    /// <p>For <code>PERSISTENT_1</code> HDD file systems, valid values are increments of 6000 GiB for 12 MB/s/TiB file systems and increments of 1800 GiB for 40 MB/s/TiB file systems.</p></li>
    /// <li>
    /// <p>For <code>SCRATCH_1</code> deployment type, valid values are 1200 GiB, 2400 GiB, and increments of 3600 GiB.</p></li>
    /// </ul>
    /// <p><b>FSx for ONTAP file systems</b> - The amount of storage capacity that you can configure depends on the value of the <code>HAPairs</code> property. The minimum value is calculated as 1,024 * <code>HAPairs</code> and the maximum is calculated as 524,288 * <code>HAPairs</code>.</p>
    /// <p><b>FSx for OpenZFS file systems</b> - The amount of storage capacity that you can configure is from 64 GiB up to 524,288 GiB (512 TiB).</p>
    /// <p><b>FSx for Windows File Server file systems</b> - The amount of storage capacity that you can configure depends on the value that you set for <code>StorageType</code> as follows:</p>
    /// <ul>
    /// <li>
    /// <p>For SSD storage, valid values are 32 GiB-65,536 GiB (64 TiB).</p></li>
    /// <li>
    /// <p>For HDD storage, valid values are 2000 GiB-65,536 GiB (64 TiB).</p></li>
    /// </ul>
    pub fn set_storage_capacity(mut self, input: ::std::option::Option<i32>) -> Self {
        self.storage_capacity = input;
        self
    }
    /// <p>Sets the storage capacity of the file system that you're creating, in gibibytes (GiB).</p>
    /// <p><b>FSx for Lustre file systems</b> - The amount of storage capacity that you can configure depends on the value that you set for <code>StorageType</code> and the Lustre <code>DeploymentType</code>, as follows:</p>
    /// <ul>
    /// <li>
    /// <p>For <code>SCRATCH_2</code>, <code>PERSISTENT_2</code> and <code>PERSISTENT_1</code> deployment types using SSD storage type, the valid values are 1200 GiB, 2400 GiB, and increments of 2400 GiB.</p></li>
    /// <li>
    /// <p>For <code>PERSISTENT_1</code> HDD file systems, valid values are increments of 6000 GiB for 12 MB/s/TiB file systems and increments of 1800 GiB for 40 MB/s/TiB file systems.</p></li>
    /// <li>
    /// <p>For <code>SCRATCH_1</code> deployment type, valid values are 1200 GiB, 2400 GiB, and increments of 3600 GiB.</p></li>
    /// </ul>
    /// <p><b>FSx for ONTAP file systems</b> - The amount of storage capacity that you can configure depends on the value of the <code>HAPairs</code> property. The minimum value is calculated as 1,024 * <code>HAPairs</code> and the maximum is calculated as 524,288 * <code>HAPairs</code>.</p>
    /// <p><b>FSx for OpenZFS file systems</b> - The amount of storage capacity that you can configure is from 64 GiB up to 524,288 GiB (512 TiB).</p>
    /// <p><b>FSx for Windows File Server file systems</b> - The amount of storage capacity that you can configure depends on the value that you set for <code>StorageType</code> as follows:</p>
    /// <ul>
    /// <li>
    /// <p>For SSD storage, valid values are 32 GiB-65,536 GiB (64 TiB).</p></li>
    /// <li>
    /// <p>For HDD storage, valid values are 2000 GiB-65,536 GiB (64 TiB).</p></li>
    /// </ul>
    pub fn get_storage_capacity(&self) -> &::std::option::Option<i32> {
        &self.storage_capacity
    }
    /// <p>Sets the storage type for the file system that you're creating. Valid values are <code>SSD</code> and <code>HDD</code>.</p>
    /// <ul>
    /// <li>
    /// <p>Set to <code>SSD</code> to use solid state drive storage. SSD is supported on all Windows, Lustre, ONTAP, and OpenZFS deployment types.</p></li>
    /// <li>
    /// <p>Set to <code>HDD</code> to use hard disk drive storage. HDD is supported on <code>SINGLE_AZ_2</code> and <code>MULTI_AZ_1</code> Windows file system deployment types, and on <code>PERSISTENT_1</code> Lustre file system deployment types.</p></li>
    /// </ul>
    /// <p>Default value is <code>SSD</code>. For more information, see <a href="https://docs.aws.amazon.com/fsx/latest/WindowsGuide/optimize-fsx-costs.html#storage-type-options"> Storage type options</a> in the <i>FSx for Windows File Server User Guide</i> and <a href="https://docs.aws.amazon.com/fsx/latest/LustreGuide/what-is.html#storage-options">Multiple storage options</a> in the <i>FSx for Lustre User Guide</i>.</p>
    pub fn storage_type(mut self, input: crate::types::StorageType) -> Self {
        self.storage_type = ::std::option::Option::Some(input);
        self
    }
    /// <p>Sets the storage type for the file system that you're creating. Valid values are <code>SSD</code> and <code>HDD</code>.</p>
    /// <ul>
    /// <li>
    /// <p>Set to <code>SSD</code> to use solid state drive storage. SSD is supported on all Windows, Lustre, ONTAP, and OpenZFS deployment types.</p></li>
    /// <li>
    /// <p>Set to <code>HDD</code> to use hard disk drive storage. HDD is supported on <code>SINGLE_AZ_2</code> and <code>MULTI_AZ_1</code> Windows file system deployment types, and on <code>PERSISTENT_1</code> Lustre file system deployment types.</p></li>
    /// </ul>
    /// <p>Default value is <code>SSD</code>. For more information, see <a href="https://docs.aws.amazon.com/fsx/latest/WindowsGuide/optimize-fsx-costs.html#storage-type-options"> Storage type options</a> in the <i>FSx for Windows File Server User Guide</i> and <a href="https://docs.aws.amazon.com/fsx/latest/LustreGuide/what-is.html#storage-options">Multiple storage options</a> in the <i>FSx for Lustre User Guide</i>.</p>
    pub fn set_storage_type(mut self, input: ::std::option::Option<crate::types::StorageType>) -> Self {
        self.storage_type = input;
        self
    }
    /// <p>Sets the storage type for the file system that you're creating. Valid values are <code>SSD</code> and <code>HDD</code>.</p>
    /// <ul>
    /// <li>
    /// <p>Set to <code>SSD</code> to use solid state drive storage. SSD is supported on all Windows, Lustre, ONTAP, and OpenZFS deployment types.</p></li>
    /// <li>
    /// <p>Set to <code>HDD</code> to use hard disk drive storage. HDD is supported on <code>SINGLE_AZ_2</code> and <code>MULTI_AZ_1</code> Windows file system deployment types, and on <code>PERSISTENT_1</code> Lustre file system deployment types.</p></li>
    /// </ul>
    /// <p>Default value is <code>SSD</code>. For more information, see <a href="https://docs.aws.amazon.com/fsx/latest/WindowsGuide/optimize-fsx-costs.html#storage-type-options"> Storage type options</a> in the <i>FSx for Windows File Server User Guide</i> and <a href="https://docs.aws.amazon.com/fsx/latest/LustreGuide/what-is.html#storage-options">Multiple storage options</a> in the <i>FSx for Lustre User Guide</i>.</p>
    pub fn get_storage_type(&self) -> &::std::option::Option<crate::types::StorageType> {
        &self.storage_type
    }
    /// Appends an item to `subnet_ids`.
    ///
    /// To override the contents of this collection use [`set_subnet_ids`](Self::set_subnet_ids).
    ///
    /// <p>Specifies the IDs of the subnets that the file system will be accessible from. For Windows and ONTAP <code>MULTI_AZ_1</code> deployment types,provide exactly two subnet IDs, one for the preferred file server and one for the standby file server. You specify one of these subnets as the preferred subnet using the <code>WindowsConfiguration &gt; PreferredSubnetID</code> or <code>OntapConfiguration &gt; PreferredSubnetID</code> properties. For more information about Multi-AZ file system configuration, see <a href="https://docs.aws.amazon.com/fsx/latest/WindowsGuide/high-availability-multiAZ.html"> Availability and durability: Single-AZ and Multi-AZ file systems</a> in the <i>Amazon FSx for Windows User Guide</i> and <a href="https://docs.aws.amazon.com/fsx/latest/ONTAPGuide/high-availability-multiAZ.html"> Availability and durability</a> in the <i>Amazon FSx for ONTAP User Guide</i>.</p>
    /// <p>For Windows <code>SINGLE_AZ_1</code> and <code>SINGLE_AZ_2</code> and all Lustre deployment types, provide exactly one subnet ID. The file server is launched in that subnet's Availability Zone.</p>
    pub fn subnet_ids(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        let mut v = self.subnet_ids.unwrap_or_default();
        v.push(input.into());
        self.subnet_ids = ::std::option::Option::Some(v);
        self
    }
    /// <p>Specifies the IDs of the subnets that the file system will be accessible from. For Windows and ONTAP <code>MULTI_AZ_1</code> deployment types,provide exactly two subnet IDs, one for the preferred file server and one for the standby file server. You specify one of these subnets as the preferred subnet using the <code>WindowsConfiguration &gt; PreferredSubnetID</code> or <code>OntapConfiguration &gt; PreferredSubnetID</code> properties. For more information about Multi-AZ file system configuration, see <a href="https://docs.aws.amazon.com/fsx/latest/WindowsGuide/high-availability-multiAZ.html"> Availability and durability: Single-AZ and Multi-AZ file systems</a> in the <i>Amazon FSx for Windows User Guide</i> and <a href="https://docs.aws.amazon.com/fsx/latest/ONTAPGuide/high-availability-multiAZ.html"> Availability and durability</a> in the <i>Amazon FSx for ONTAP User Guide</i>.</p>
    /// <p>For Windows <code>SINGLE_AZ_1</code> and <code>SINGLE_AZ_2</code> and all Lustre deployment types, provide exactly one subnet ID. The file server is launched in that subnet's Availability Zone.</p>
    pub fn set_subnet_ids(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
        self.subnet_ids = input;
        self
    }
    /// <p>Specifies the IDs of the subnets that the file system will be accessible from. For Windows and ONTAP <code>MULTI_AZ_1</code> deployment types,provide exactly two subnet IDs, one for the preferred file server and one for the standby file server. You specify one of these subnets as the preferred subnet using the <code>WindowsConfiguration &gt; PreferredSubnetID</code> or <code>OntapConfiguration &gt; PreferredSubnetID</code> properties. For more information about Multi-AZ file system configuration, see <a href="https://docs.aws.amazon.com/fsx/latest/WindowsGuide/high-availability-multiAZ.html"> Availability and durability: Single-AZ and Multi-AZ file systems</a> in the <i>Amazon FSx for Windows User Guide</i> and <a href="https://docs.aws.amazon.com/fsx/latest/ONTAPGuide/high-availability-multiAZ.html"> Availability and durability</a> in the <i>Amazon FSx for ONTAP User Guide</i>.</p>
    /// <p>For Windows <code>SINGLE_AZ_1</code> and <code>SINGLE_AZ_2</code> and all Lustre deployment types, provide exactly one subnet ID. The file server is launched in that subnet's Availability Zone.</p>
    pub fn get_subnet_ids(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
        &self.subnet_ids
    }
    /// Appends an item to `security_group_ids`.
    ///
    /// To override the contents of this collection use [`set_security_group_ids`](Self::set_security_group_ids).
    ///
    /// <p>A list of IDs specifying the security groups to apply to all network interfaces created for file system access. This list isn't returned in later requests to describe the file system.</p><important>
    /// <p>You must specify a security group if you are creating a Multi-AZ FSx for ONTAP file system in a VPC subnet that has been shared with you.</p>
    /// </important>
    pub fn security_group_ids(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        let mut v = self.security_group_ids.unwrap_or_default();
        v.push(input.into());
        self.security_group_ids = ::std::option::Option::Some(v);
        self
    }
    /// <p>A list of IDs specifying the security groups to apply to all network interfaces created for file system access. This list isn't returned in later requests to describe the file system.</p><important>
    /// <p>You must specify a security group if you are creating a Multi-AZ FSx for ONTAP file system in a VPC subnet that has been shared with you.</p>
    /// </important>
    pub fn set_security_group_ids(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
        self.security_group_ids = input;
        self
    }
    /// <p>A list of IDs specifying the security groups to apply to all network interfaces created for file system access. This list isn't returned in later requests to describe the file system.</p><important>
    /// <p>You must specify a security group if you are creating a Multi-AZ FSx for ONTAP file system in a VPC subnet that has been shared with you.</p>
    /// </important>
    pub fn get_security_group_ids(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
        &self.security_group_ids
    }
    /// Appends an item to `tags`.
    ///
    /// To override the contents of this collection use [`set_tags`](Self::set_tags).
    ///
    /// <p>The tags to apply to the file system that's being created. The key value of the <code>Name</code> tag appears in the console as the file system name.</p>
    pub fn tags(mut self, input: crate::types::Tag) -> Self {
        let mut v = self.tags.unwrap_or_default();
        v.push(input);
        self.tags = ::std::option::Option::Some(v);
        self
    }
    /// <p>The tags to apply to the file system that's being created. The key value of the <code>Name</code> tag appears in the console as the file system name.</p>
    pub fn set_tags(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::Tag>>) -> Self {
        self.tags = input;
        self
    }
    /// <p>The tags to apply to the file system that's being created. The key value of the <code>Name</code> tag appears in the console as the file system name.</p>
    pub fn get_tags(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::Tag>> {
        &self.tags
    }
    /// <p>Specifies the ID of the Key Management Service (KMS) key to use for encrypting data on Amazon FSx file systems, as follows:</p>
    /// <ul>
    /// <li>
    /// <p>Amazon FSx for Lustre <code>PERSISTENT_1</code> and <code>PERSISTENT_2</code> deployment types only.</p>
    /// <p><code>SCRATCH_1</code> and <code>SCRATCH_2</code> types are encrypted using the Amazon FSx service KMS key for your account.</p></li>
    /// <li>
    /// <p>Amazon FSx for NetApp ONTAP</p></li>
    /// <li>
    /// <p>Amazon FSx for OpenZFS</p></li>
    /// <li>
    /// <p>Amazon FSx for Windows File Server</p></li>
    /// </ul>
    /// <p>If a <code>KmsKeyId</code> isn't specified, the Amazon FSx-managed KMS key for your account is used. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_Encrypt.html">Encrypt</a> in the <i>Key Management Service API Reference</i>.</p>
    pub fn kms_key_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.kms_key_id = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>Specifies the ID of the Key Management Service (KMS) key to use for encrypting data on Amazon FSx file systems, as follows:</p>
    /// <ul>
    /// <li>
    /// <p>Amazon FSx for Lustre <code>PERSISTENT_1</code> and <code>PERSISTENT_2</code> deployment types only.</p>
    /// <p><code>SCRATCH_1</code> and <code>SCRATCH_2</code> types are encrypted using the Amazon FSx service KMS key for your account.</p></li>
    /// <li>
    /// <p>Amazon FSx for NetApp ONTAP</p></li>
    /// <li>
    /// <p>Amazon FSx for OpenZFS</p></li>
    /// <li>
    /// <p>Amazon FSx for Windows File Server</p></li>
    /// </ul>
    /// <p>If a <code>KmsKeyId</code> isn't specified, the Amazon FSx-managed KMS key for your account is used. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_Encrypt.html">Encrypt</a> in the <i>Key Management Service API Reference</i>.</p>
    pub fn set_kms_key_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.kms_key_id = input;
        self
    }
    /// <p>Specifies the ID of the Key Management Service (KMS) key to use for encrypting data on Amazon FSx file systems, as follows:</p>
    /// <ul>
    /// <li>
    /// <p>Amazon FSx for Lustre <code>PERSISTENT_1</code> and <code>PERSISTENT_2</code> deployment types only.</p>
    /// <p><code>SCRATCH_1</code> and <code>SCRATCH_2</code> types are encrypted using the Amazon FSx service KMS key for your account.</p></li>
    /// <li>
    /// <p>Amazon FSx for NetApp ONTAP</p></li>
    /// <li>
    /// <p>Amazon FSx for OpenZFS</p></li>
    /// <li>
    /// <p>Amazon FSx for Windows File Server</p></li>
    /// </ul>
    /// <p>If a <code>KmsKeyId</code> isn't specified, the Amazon FSx-managed KMS key for your account is used. For more information, see <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_Encrypt.html">Encrypt</a> in the <i>Key Management Service API Reference</i>.</p>
    pub fn get_kms_key_id(&self) -> &::std::option::Option<::std::string::String> {
        &self.kms_key_id
    }
    /// <p>The Microsoft Windows configuration for the file system that's being created.</p>
    pub fn windows_configuration(mut self, input: crate::types::CreateFileSystemWindowsConfiguration) -> Self {
        self.windows_configuration = ::std::option::Option::Some(input);
        self
    }
    /// <p>The Microsoft Windows configuration for the file system that's being created.</p>
    pub fn set_windows_configuration(mut self, input: ::std::option::Option<crate::types::CreateFileSystemWindowsConfiguration>) -> Self {
        self.windows_configuration = input;
        self
    }
    /// <p>The Microsoft Windows configuration for the file system that's being created.</p>
    pub fn get_windows_configuration(&self) -> &::std::option::Option<crate::types::CreateFileSystemWindowsConfiguration> {
        &self.windows_configuration
    }
    /// <p>The Lustre configuration for the file system being created.</p><note>
    /// <p>The following parameters are not supported for file systems with a data repository association created with .</p>
    /// <ul>
    /// <li>
    /// <p><code>AutoImportPolicy</code></p></li>
    /// <li>
    /// <p><code>ExportPath</code></p></li>
    /// <li>
    /// <p><code>ImportedFileChunkSize</code></p></li>
    /// <li>
    /// <p><code>ImportPath</code></p></li>
    /// </ul>
    /// </note>
    pub fn lustre_configuration(mut self, input: crate::types::CreateFileSystemLustreConfiguration) -> Self {
        self.lustre_configuration = ::std::option::Option::Some(input);
        self
    }
    /// <p>The Lustre configuration for the file system being created.</p><note>
    /// <p>The following parameters are not supported for file systems with a data repository association created with .</p>
    /// <ul>
    /// <li>
    /// <p><code>AutoImportPolicy</code></p></li>
    /// <li>
    /// <p><code>ExportPath</code></p></li>
    /// <li>
    /// <p><code>ImportedFileChunkSize</code></p></li>
    /// <li>
    /// <p><code>ImportPath</code></p></li>
    /// </ul>
    /// </note>
    pub fn set_lustre_configuration(mut self, input: ::std::option::Option<crate::types::CreateFileSystemLustreConfiguration>) -> Self {
        self.lustre_configuration = input;
        self
    }
    /// <p>The Lustre configuration for the file system being created.</p><note>
    /// <p>The following parameters are not supported for file systems with a data repository association created with .</p>
    /// <ul>
    /// <li>
    /// <p><code>AutoImportPolicy</code></p></li>
    /// <li>
    /// <p><code>ExportPath</code></p></li>
    /// <li>
    /// <p><code>ImportedFileChunkSize</code></p></li>
    /// <li>
    /// <p><code>ImportPath</code></p></li>
    /// </ul>
    /// </note>
    pub fn get_lustre_configuration(&self) -> &::std::option::Option<crate::types::CreateFileSystemLustreConfiguration> {
        &self.lustre_configuration
    }
    /// <p>The ONTAP configuration properties of the FSx for ONTAP file system that you are creating.</p>
    pub fn ontap_configuration(mut self, input: crate::types::CreateFileSystemOntapConfiguration) -> Self {
        self.ontap_configuration = ::std::option::Option::Some(input);
        self
    }
    /// <p>The ONTAP configuration properties of the FSx for ONTAP file system that you are creating.</p>
    pub fn set_ontap_configuration(mut self, input: ::std::option::Option<crate::types::CreateFileSystemOntapConfiguration>) -> Self {
        self.ontap_configuration = input;
        self
    }
    /// <p>The ONTAP configuration properties of the FSx for ONTAP file system that you are creating.</p>
    pub fn get_ontap_configuration(&self) -> &::std::option::Option<crate::types::CreateFileSystemOntapConfiguration> {
        &self.ontap_configuration
    }
    /// <p>(Optional) For FSx for Lustre file systems, sets the Lustre version for the file system that you're creating. Valid values are <code>2.10</code>, <code>2.12</code>, and <code>2.15</code>:</p>
    /// <ul>
    /// <li>
    /// <p>2.10 is supported by the Scratch and Persistent_1 Lustre deployment types.</p></li>
    /// <li>
    /// <p>2.12 and 2.15 are supported by all Lustre deployment types. <code>2.12</code> or <code>2.15</code> is required when setting FSx for Lustre <code>DeploymentType</code> to <code>PERSISTENT_2</code>.</p></li>
    /// </ul>
    /// <p>Default value = <code>2.10</code>, except when <code>DeploymentType</code> is set to <code>PERSISTENT_2</code>, then the default is <code>2.12</code>.</p><note>
    /// <p>If you set <code>FileSystemTypeVersion</code> to <code>2.10</code> for a <code>PERSISTENT_2</code> Lustre deployment type, the <code>CreateFileSystem</code> operation fails.</p>
    /// </note>
    pub fn file_system_type_version(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.file_system_type_version = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>(Optional) For FSx for Lustre file systems, sets the Lustre version for the file system that you're creating. Valid values are <code>2.10</code>, <code>2.12</code>, and <code>2.15</code>:</p>
    /// <ul>
    /// <li>
    /// <p>2.10 is supported by the Scratch and Persistent_1 Lustre deployment types.</p></li>
    /// <li>
    /// <p>2.12 and 2.15 are supported by all Lustre deployment types. <code>2.12</code> or <code>2.15</code> is required when setting FSx for Lustre <code>DeploymentType</code> to <code>PERSISTENT_2</code>.</p></li>
    /// </ul>
    /// <p>Default value = <code>2.10</code>, except when <code>DeploymentType</code> is set to <code>PERSISTENT_2</code>, then the default is <code>2.12</code>.</p><note>
    /// <p>If you set <code>FileSystemTypeVersion</code> to <code>2.10</code> for a <code>PERSISTENT_2</code> Lustre deployment type, the <code>CreateFileSystem</code> operation fails.</p>
    /// </note>
    pub fn set_file_system_type_version(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.file_system_type_version = input;
        self
    }
    /// <p>(Optional) For FSx for Lustre file systems, sets the Lustre version for the file system that you're creating. Valid values are <code>2.10</code>, <code>2.12</code>, and <code>2.15</code>:</p>
    /// <ul>
    /// <li>
    /// <p>2.10 is supported by the Scratch and Persistent_1 Lustre deployment types.</p></li>
    /// <li>
    /// <p>2.12 and 2.15 are supported by all Lustre deployment types. <code>2.12</code> or <code>2.15</code> is required when setting FSx for Lustre <code>DeploymentType</code> to <code>PERSISTENT_2</code>.</p></li>
    /// </ul>
    /// <p>Default value = <code>2.10</code>, except when <code>DeploymentType</code> is set to <code>PERSISTENT_2</code>, then the default is <code>2.12</code>.</p><note>
    /// <p>If you set <code>FileSystemTypeVersion</code> to <code>2.10</code> for a <code>PERSISTENT_2</code> Lustre deployment type, the <code>CreateFileSystem</code> operation fails.</p>
    /// </note>
    pub fn get_file_system_type_version(&self) -> &::std::option::Option<::std::string::String> {
        &self.file_system_type_version
    }
    /// <p>The OpenZFS configuration for the file system that's being created.</p>
    pub fn open_zfs_configuration(mut self, input: crate::types::CreateFileSystemOpenZfsConfiguration) -> Self {
        self.open_zfs_configuration = ::std::option::Option::Some(input);
        self
    }
    /// <p>The OpenZFS configuration for the file system that's being created.</p>
    pub fn set_open_zfs_configuration(mut self, input: ::std::option::Option<crate::types::CreateFileSystemOpenZfsConfiguration>) -> Self {
        self.open_zfs_configuration = input;
        self
    }
    /// <p>The OpenZFS configuration for the file system that's being created.</p>
    pub fn get_open_zfs_configuration(&self) -> &::std::option::Option<crate::types::CreateFileSystemOpenZfsConfiguration> {
        &self.open_zfs_configuration
    }
    /// Consumes the builder and constructs a [`CreateFileSystemInput`](crate::operation::create_file_system::CreateFileSystemInput).
    pub fn build(
        self,
    ) -> ::std::result::Result<crate::operation::create_file_system::CreateFileSystemInput, ::aws_smithy_types::error::operation::BuildError> {
        ::std::result::Result::Ok(crate::operation::create_file_system::CreateFileSystemInput {
            client_request_token: self.client_request_token,
            file_system_type: self.file_system_type,
            storage_capacity: self.storage_capacity,
            storage_type: self.storage_type,
            subnet_ids: self.subnet_ids,
            security_group_ids: self.security_group_ids,
            tags: self.tags,
            kms_key_id: self.kms_key_id,
            windows_configuration: self.windows_configuration,
            lustre_configuration: self.lustre_configuration,
            ontap_configuration: self.ontap_configuration,
            file_system_type_version: self.file_system_type_version,
            open_zfs_configuration: self.open_zfs_configuration,
        })
    }
}