Struct aws_sdk_ecr::client::Client

pub struct Client<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

An ergonomic service client for AmazonEC2ContainerRegistry_V20150921.

This client allows ergonomic access to a AmazonEC2ContainerRegistry_V20150921-shaped service. Each method corresponds to an endpoint defined in the service’s Smithy model, and the request and response shapes are auto-generated from that same model.

Using a Client

Once you have a client set up, you can access the service’s endpoints by calling the appropriate method on Client. Each such method returns a request builder for that endpoint, with methods for setting the various fields of the request. Once your request is complete, use the send method to send the request. send returns a future, which you then have to .await to get the service’s response.

Implementations

impl<C, M, R> Client<C, M, R>

pub fn with_config(client: Client<C, M, R>, conf: Config) -> Self

Creates a client with the given service configuration.

pub fn conf(&self) -> &Config

Returns the client’s configuration.

impl<C, M, R> Client<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub fn batch_check_layer_availability(
    &self
) -> BatchCheckLayerAvailability<C, M, R>

Constructs a fluent builder for the BatchCheckLayerAvailability operation.

See BatchCheckLayerAvailability for more information about the operation and its arguments.

pub fn batch_delete_image(&self) -> BatchDeleteImage<C, M, R>

Constructs a fluent builder for the BatchDeleteImage operation.

See BatchDeleteImage for more information about the operation and its arguments.

pub fn batch_get_image(&self) -> BatchGetImage<C, M, R>

Constructs a fluent builder for the BatchGetImage operation.

See BatchGetImage for more information about the operation and its arguments.

pub fn complete_layer_upload(&self) -> CompleteLayerUpload<C, M, R>

Constructs a fluent builder for the CompleteLayerUpload operation.

See CompleteLayerUpload for more information about the operation and its arguments.

pub fn create_repository(&self) -> CreateRepository<C, M, R>

Constructs a fluent builder for the CreateRepository operation.

See CreateRepository for more information about the operation and its arguments.

pub fn delete_lifecycle_policy(&self) -> DeleteLifecyclePolicy<C, M, R>

Constructs a fluent builder for the DeleteLifecyclePolicy operation.

See DeleteLifecyclePolicy for more information about the operation and its arguments.

pub fn delete_registry_policy(&self) -> DeleteRegistryPolicy<C, M, R>

Constructs a fluent builder for the DeleteRegistryPolicy operation.

See DeleteRegistryPolicy for more information about the operation and its arguments.

pub fn delete_repository(&self) -> DeleteRepository<C, M, R>

Constructs a fluent builder for the DeleteRepository operation.

See DeleteRepository for more information about the operation and its arguments.

pub fn delete_repository_policy(&self) -> DeleteRepositoryPolicy<C, M, R>

Constructs a fluent builder for the DeleteRepositoryPolicy operation.

See DeleteRepositoryPolicy for more information about the operation and its arguments.

pub fn describe_image_replication_status(
    &self
) -> DescribeImageReplicationStatus<C, M, R>

Constructs a fluent builder for the DescribeImageReplicationStatus operation.

See DescribeImageReplicationStatus for more information about the operation and its arguments.

pub fn describe_images(&self) -> DescribeImages<C, M, R>

Constructs a fluent builder for the DescribeImages operation.

See DescribeImages for more information about the operation and its arguments.

pub fn describe_image_scan_findings(&self) -> DescribeImageScanFindings<C, M, R>

Constructs a fluent builder for the DescribeImageScanFindings operation.

See DescribeImageScanFindings for more information about the operation and its arguments.

pub fn describe_registry(&self) -> DescribeRegistry<C, M, R>

Constructs a fluent builder for the DescribeRegistry operation.

See DescribeRegistry for more information about the operation and its arguments.

pub fn describe_repositories(&self) -> DescribeRepositories<C, M, R>

Constructs a fluent builder for the DescribeRepositories operation.

See DescribeRepositories for more information about the operation and its arguments.

pub fn get_authorization_token(&self) -> GetAuthorizationToken<C, M, R>

Constructs a fluent builder for the GetAuthorizationToken operation.

See GetAuthorizationToken for more information about the operation and its arguments.

pub fn get_download_url_for_layer(&self) -> GetDownloadUrlForLayer<C, M, R>

Constructs a fluent builder for the GetDownloadUrlForLayer operation.

See GetDownloadUrlForLayer for more information about the operation and its arguments.

pub fn get_lifecycle_policy(&self) -> GetLifecyclePolicy<C, M, R>

Constructs a fluent builder for the GetLifecyclePolicy operation.

See GetLifecyclePolicy for more information about the operation and its arguments.

pub fn get_lifecycle_policy_preview(&self) -> GetLifecyclePolicyPreview<C, M, R>

Constructs a fluent builder for the GetLifecyclePolicyPreview operation.

See GetLifecyclePolicyPreview for more information about the operation and its arguments.

pub fn get_registry_policy(&self) -> GetRegistryPolicy<C, M, R>

Constructs a fluent builder for the GetRegistryPolicy operation.

See GetRegistryPolicy for more information about the operation and its arguments.

pub fn get_repository_policy(&self) -> GetRepositoryPolicy<C, M, R>

Constructs a fluent builder for the GetRepositoryPolicy operation.

See GetRepositoryPolicy for more information about the operation and its arguments.

pub fn initiate_layer_upload(&self) -> InitiateLayerUpload<C, M, R>

Constructs a fluent builder for the InitiateLayerUpload operation.

See InitiateLayerUpload for more information about the operation and its arguments.

pub fn list_images(&self) -> ListImages<C, M, R>

Constructs a fluent builder for the ListImages operation.

See ListImages for more information about the operation and its arguments.

pub fn list_tags_for_resource(&self) -> ListTagsForResource<C, M, R>

Constructs a fluent builder for the ListTagsForResource operation.

See ListTagsForResource for more information about the operation and its arguments.

pub fn put_image(&self) -> PutImage<C, M, R>

Constructs a fluent builder for the PutImage operation.

See PutImage for more information about the operation and its arguments.

pub fn put_image_scanning_configuration(
    &self
) -> PutImageScanningConfiguration<C, M, R>

Constructs a fluent builder for the PutImageScanningConfiguration operation.

See PutImageScanningConfiguration for more information about the operation and its arguments.

pub fn put_image_tag_mutability(&self) -> PutImageTagMutability<C, M, R>

Constructs a fluent builder for the PutImageTagMutability operation.

See PutImageTagMutability for more information about the operation and its arguments.

pub fn put_lifecycle_policy(&self) -> PutLifecyclePolicy<C, M, R>

Constructs a fluent builder for the PutLifecyclePolicy operation.

See PutLifecyclePolicy for more information about the operation and its arguments.

pub fn put_registry_policy(&self) -> PutRegistryPolicy<C, M, R>

Constructs a fluent builder for the PutRegistryPolicy operation.

See PutRegistryPolicy for more information about the operation and its arguments.

pub fn put_replication_configuration(
    &self
) -> PutReplicationConfiguration<C, M, R>

Constructs a fluent builder for the PutReplicationConfiguration operation.

See PutReplicationConfiguration for more information about the operation and its arguments.

pub fn set_repository_policy(&self) -> SetRepositoryPolicy<C, M, R>

Constructs a fluent builder for the SetRepositoryPolicy operation.

See SetRepositoryPolicy for more information about the operation and its arguments.

pub fn start_image_scan(&self) -> StartImageScan<C, M, R>

Constructs a fluent builder for the StartImageScan operation.

See StartImageScan for more information about the operation and its arguments.

pub fn start_lifecycle_policy_preview(
    &self
) -> StartLifecyclePolicyPreview<C, M, R>

Constructs a fluent builder for the StartLifecyclePolicyPreview operation.

See StartLifecyclePolicyPreview for more information about the operation and its arguments.

pub fn tag_resource(&self) -> TagResource<C, M, R>

Constructs a fluent builder for the TagResource operation.

See TagResource for more information about the operation and its arguments.

pub fn untag_resource(&self) -> UntagResource<C, M, R>

Constructs a fluent builder for the UntagResource operation.

See UntagResource for more information about the operation and its arguments.

pub fn upload_layer_part(&self) -> UploadLayerPart<C, M, R>

Constructs a fluent builder for the UploadLayerPart operation.

See UploadLayerPart for more information about the operation and its arguments.

impl<C> Client<C, AwsMiddleware, Standard>

pub fn from_conf_conn(conf: Config, conn: C) -> Self

Creates a client with the given service config and connector override.

impl Client<DynConnector, AwsMiddleware, Standard>

pub fn new(config: &Config) -> Self

Creates a new client from a shared config.

pub fn from_conf(conf: Config) -> Self

Creates a new client from the service Config.

Trait Implementations

impl<C, M, R> Clone for Client<C, M, R>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C: Debug, M: Debug, R: Debug> Debug for Client<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<C, M, R> From<Client<C, M, R>> for Client<C, M, R>

fn from(client: Client<C, M, R>) -> Self

Performs the conversion.