// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[derive(Debug)]
pub(crate) struct Handle {
pub(crate) client: aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
pub(crate) conf: crate::Config,
}
/// Client for AWS Cost and Usage Report Service
///
/// Client for invoking operations on AWS Cost and Usage Report Service. Each operation on AWS Cost and Usage Report Service is a method on this
/// this struct. `.send()` MUST be invoked on the generated operations to dispatch the request to the service.
///
/// # Examples
/// **Constructing a client and invoking an operation**
/// ```rust,no_run
/// # async fn docs() {
/// // create a shared configuration. This can be used & shared between multiple service clients.
/// let shared_config = aws_config::load_from_env().await;
/// let client = aws_sdk_costandusagereport::Client::new(&shared_config);
/// // invoke an operation
/// /* let rsp = client
/// .<operation_name>().
/// .<param>("some value")
/// .send().await; */
/// # }
/// ```
/// **Constructing a client with custom configuration**
/// ```rust,no_run
/// use aws_config::retry::RetryConfig;
/// # async fn docs() {
/// let shared_config = aws_config::load_from_env().await;
/// let config = aws_sdk_costandusagereport::config::Builder::from(&shared_config)
/// .retry_config(RetryConfig::disabled())
/// .build();
/// let client = aws_sdk_costandusagereport::Client::from_conf(config);
/// # }
#[derive(std::fmt::Debug)]
pub struct Client {
handle: std::sync::Arc<Handle>,
}
impl std::clone::Clone for Client {
fn clone(&self) -> Self {
Self {
handle: self.handle.clone(),
}
}
}
#[doc(inline)]
pub use aws_smithy_client::Builder;
impl
From<
aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
> for Client
{
fn from(
client: aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
) -> Self {
Self::with_config(client, crate::Config::builder().build())
}
}
impl Client {
/// Creates a client with the given service configuration.
pub fn with_config(
client: aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
conf: crate::Config,
) -> Self {
Self {
handle: std::sync::Arc::new(Handle { client, conf }),
}
}
/// Returns the client's configuration.
pub fn conf(&self) -> &crate::Config {
&self.handle.conf
}
}
impl Client {
/// Constructs a fluent builder for the [`DeleteReportDefinition`](crate::client::fluent_builders::DeleteReportDefinition) operation.
///
/// - The fluent builder is configurable:
/// - [`report_name(impl Into<String>)`](crate::client::fluent_builders::DeleteReportDefinition::report_name) / [`set_report_name(Option<String>)`](crate::client::fluent_builders::DeleteReportDefinition::set_report_name): <p>The name of the report that you want to delete. The name must be unique, is case sensitive, and can't include spaces.</p>
/// - On success, responds with [`DeleteReportDefinitionOutput`](crate::output::DeleteReportDefinitionOutput) with field(s):
/// - [`response_message(Option<String>)`](crate::output::DeleteReportDefinitionOutput::response_message): <p>Whether the deletion was successful or not.</p>
/// - On failure, responds with [`SdkError<DeleteReportDefinitionError>`](crate::error::DeleteReportDefinitionError)
pub fn delete_report_definition(&self) -> fluent_builders::DeleteReportDefinition {
fluent_builders::DeleteReportDefinition::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`DescribeReportDefinitions`](crate::client::fluent_builders::DescribeReportDefinitions) operation.
/// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::DescribeReportDefinitions::into_paginator).
///
/// - The fluent builder is configurable:
/// - [`max_results(i32)`](crate::client::fluent_builders::DescribeReportDefinitions::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::DescribeReportDefinitions::set_max_results): <p>The maximum number of results that AWS returns for the operation.</p>
/// - [`next_token(impl Into<String>)`](crate::client::fluent_builders::DescribeReportDefinitions::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::DescribeReportDefinitions::set_next_token): <p>A generic string.</p>
/// - On success, responds with [`DescribeReportDefinitionsOutput`](crate::output::DescribeReportDefinitionsOutput) with field(s):
/// - [`report_definitions(Option<Vec<ReportDefinition>>)`](crate::output::DescribeReportDefinitionsOutput::report_definitions): <p>A list of AWS Cost and Usage reports owned by the account.</p>
/// - [`next_token(Option<String>)`](crate::output::DescribeReportDefinitionsOutput::next_token): <p>A generic string.</p>
/// - On failure, responds with [`SdkError<DescribeReportDefinitionsError>`](crate::error::DescribeReportDefinitionsError)
pub fn describe_report_definitions(&self) -> fluent_builders::DescribeReportDefinitions {
fluent_builders::DescribeReportDefinitions::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`ModifyReportDefinition`](crate::client::fluent_builders::ModifyReportDefinition) operation.
///
/// - The fluent builder is configurable:
/// - [`report_name(impl Into<String>)`](crate::client::fluent_builders::ModifyReportDefinition::report_name) / [`set_report_name(Option<String>)`](crate::client::fluent_builders::ModifyReportDefinition::set_report_name): <p>The name of the report that you want to create. The name must be unique, is case sensitive, and can't include spaces. </p>
/// - [`report_definition(ReportDefinition)`](crate::client::fluent_builders::ModifyReportDefinition::report_definition) / [`set_report_definition(Option<ReportDefinition>)`](crate::client::fluent_builders::ModifyReportDefinition::set_report_definition): <p>The definition of AWS Cost and Usage Report. You can specify the report name, time unit, report format, compression format, S3 bucket, additional artifacts, and schema elements in the definition. </p>
/// - On success, responds with [`ModifyReportDefinitionOutput`](crate::output::ModifyReportDefinitionOutput)
/// - On failure, responds with [`SdkError<ModifyReportDefinitionError>`](crate::error::ModifyReportDefinitionError)
pub fn modify_report_definition(&self) -> fluent_builders::ModifyReportDefinition {
fluent_builders::ModifyReportDefinition::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`PutReportDefinition`](crate::client::fluent_builders::PutReportDefinition) operation.
///
/// - The fluent builder is configurable:
/// - [`report_definition(ReportDefinition)`](crate::client::fluent_builders::PutReportDefinition::report_definition) / [`set_report_definition(Option<ReportDefinition>)`](crate::client::fluent_builders::PutReportDefinition::set_report_definition): <p>Represents the output of the PutReportDefinition operation. The content consists of the detailed metadata and data file information. </p>
/// - On success, responds with [`PutReportDefinitionOutput`](crate::output::PutReportDefinitionOutput)
/// - On failure, responds with [`SdkError<PutReportDefinitionError>`](crate::error::PutReportDefinitionError)
pub fn put_report_definition(&self) -> fluent_builders::PutReportDefinition {
fluent_builders::PutReportDefinition::new(self.handle.clone())
}
}
pub mod fluent_builders {
//! Utilities to ergonomically construct a request to the service.
//!
//! Fluent builders are created through the [`Client`](crate::client::Client) by calling
//! one if its operation methods. After parameters are set using the builder methods,
//! the `send` method can be called to initiate the request.
/// Fluent builder constructing a request to `DeleteReportDefinition`.
///
/// <p>Deletes the specified report.</p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct DeleteReportDefinition {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::delete_report_definition_input::Builder,
}
impl DeleteReportDefinition {
/// Creates a new `DeleteReportDefinition`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::DeleteReportDefinition,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::DeleteReportDefinitionError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::DeleteReportDefinitionOutput,
aws_smithy_http::result::SdkError<crate::error::DeleteReportDefinitionError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p>The name of the report that you want to delete. The name must be unique, is case sensitive, and can't include spaces.</p>
pub fn report_name(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.report_name(input.into());
self
}
/// <p>The name of the report that you want to delete. The name must be unique, is case sensitive, and can't include spaces.</p>
pub fn set_report_name(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_report_name(input);
self
}
}
/// Fluent builder constructing a request to `DescribeReportDefinitions`.
///
/// <p>Lists the AWS Cost and Usage reports available to this account.</p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct DescribeReportDefinitions {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::describe_report_definitions_input::Builder,
}
impl DescribeReportDefinitions {
/// Creates a new `DescribeReportDefinitions`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::DescribeReportDefinitions,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::DescribeReportDefinitionsError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::DescribeReportDefinitionsOutput,
aws_smithy_http::result::SdkError<crate::error::DescribeReportDefinitionsError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// Create a paginator for this request
///
/// Paginators are used by calling [`send().await`](crate::paginator::DescribeReportDefinitionsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
pub fn into_paginator(self) -> crate::paginator::DescribeReportDefinitionsPaginator {
crate::paginator::DescribeReportDefinitionsPaginator::new(self.handle, self.inner)
}
/// <p>The maximum number of results that AWS returns for the operation.</p>
pub fn max_results(mut self, input: i32) -> Self {
self.inner = self.inner.max_results(input);
self
}
/// <p>The maximum number of results that AWS returns for the operation.</p>
pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
self.inner = self.inner.set_max_results(input);
self
}
/// <p>A generic string.</p>
pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.next_token(input.into());
self
}
/// <p>A generic string.</p>
pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_next_token(input);
self
}
}
/// Fluent builder constructing a request to `ModifyReportDefinition`.
///
/// <p>Allows you to programatically update your report preferences.</p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct ModifyReportDefinition {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::modify_report_definition_input::Builder,
}
impl ModifyReportDefinition {
/// Creates a new `ModifyReportDefinition`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::ModifyReportDefinition,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::ModifyReportDefinitionError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::ModifyReportDefinitionOutput,
aws_smithy_http::result::SdkError<crate::error::ModifyReportDefinitionError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p>The name of the report that you want to create. The name must be unique, is case sensitive, and can't include spaces. </p>
pub fn report_name(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.report_name(input.into());
self
}
/// <p>The name of the report that you want to create. The name must be unique, is case sensitive, and can't include spaces. </p>
pub fn set_report_name(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_report_name(input);
self
}
/// <p>The definition of AWS Cost and Usage Report. You can specify the report name, time unit, report format, compression format, S3 bucket, additional artifacts, and schema elements in the definition. </p>
pub fn report_definition(mut self, input: crate::model::ReportDefinition) -> Self {
self.inner = self.inner.report_definition(input);
self
}
/// <p>The definition of AWS Cost and Usage Report. You can specify the report name, time unit, report format, compression format, S3 bucket, additional artifacts, and schema elements in the definition. </p>
pub fn set_report_definition(
mut self,
input: std::option::Option<crate::model::ReportDefinition>,
) -> Self {
self.inner = self.inner.set_report_definition(input);
self
}
}
/// Fluent builder constructing a request to `PutReportDefinition`.
///
/// <p>Creates a new report using the description that you provide.</p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct PutReportDefinition {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::put_report_definition_input::Builder,
}
impl PutReportDefinition {
/// Creates a new `PutReportDefinition`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::PutReportDefinition,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::PutReportDefinitionError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::PutReportDefinitionOutput,
aws_smithy_http::result::SdkError<crate::error::PutReportDefinitionError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p>Represents the output of the PutReportDefinition operation. The content consists of the detailed metadata and data file information. </p>
pub fn report_definition(mut self, input: crate::model::ReportDefinition) -> Self {
self.inner = self.inner.report_definition(input);
self
}
/// <p>Represents the output of the PutReportDefinition operation. The content consists of the detailed metadata and data file information. </p>
pub fn set_report_definition(
mut self,
input: std::option::Option<crate::model::ReportDefinition>,
) -> Self {
self.inner = self.inner.set_report_definition(input);
self
}
}
}
impl Client {
/// Creates a new client from an [SDK Config](aws_types::sdk_config::SdkConfig).
///
/// # Panics
///
/// - This method will panic if the `sdk_config` is missing an async sleep implementation. If you experience this panic, set
/// the `sleep_impl` on the Config passed into this function to fix it.
/// - This method will panic if the `sdk_config` is missing an HTTP connector. If you experience this panic, set the
/// `http_connector` on the Config passed into this function to fix it.
pub fn new(sdk_config: &aws_types::sdk_config::SdkConfig) -> Self {
Self::from_conf(sdk_config.into())
}
/// Creates a new client from the service [`Config`](crate::Config).
///
/// # Panics
///
/// - This method will panic if the `conf` is missing an async sleep implementation. If you experience this panic, set
/// the `sleep_impl` on the Config passed into this function to fix it.
/// - This method will panic if the `conf` is missing an HTTP connector. If you experience this panic, set the
/// `http_connector` on the Config passed into this function to fix it.
pub fn from_conf(conf: crate::Config) -> Self {
let retry_config = conf
.retry_config()
.cloned()
.unwrap_or_else(aws_smithy_types::retry::RetryConfig::disabled);
let timeout_config = conf
.timeout_config()
.cloned()
.unwrap_or_else(aws_smithy_types::timeout::TimeoutConfig::disabled);
let sleep_impl = conf.sleep_impl();
if (retry_config.has_retry() || timeout_config.has_timeouts()) && sleep_impl.is_none() {
panic!("An async sleep implementation is required for retries or timeouts to work. \
Set the `sleep_impl` on the Config passed into this function to fix this panic.");
}
let connector = conf.http_connector().and_then(|c| {
let timeout_config = conf
.timeout_config()
.cloned()
.unwrap_or_else(aws_smithy_types::timeout::TimeoutConfig::disabled);
let connector_settings =
aws_smithy_client::http_connector::ConnectorSettings::from_timeout_config(
&timeout_config,
);
c.connector(&connector_settings, conf.sleep_impl())
});
let builder = aws_smithy_client::Builder::new();
let builder = match connector {
// Use provided connector
Some(c) => builder.connector(c),
None => {
#[cfg(any(feature = "rustls", feature = "native-tls"))]
{
// Use default connector based on enabled features
builder.dyn_https_connector(
aws_smithy_client::http_connector::ConnectorSettings::from_timeout_config(
&timeout_config,
),
)
}
#[cfg(not(any(feature = "rustls", feature = "native-tls")))]
{
panic!("No HTTP connector was available. Enable the `rustls` or `native-tls` crate feature or set a connector to fix this.");
}
}
};
let mut builder = builder
.middleware(aws_smithy_client::erase::DynMiddleware::new(
crate::middleware::DefaultMiddleware::new(),
))
.retry_config(retry_config.into())
.operation_timeout_config(timeout_config.into());
builder.set_sleep_impl(sleep_impl);
let client = builder.build();
Self {
handle: std::sync::Arc::new(Handle { client, conf }),
}
}
}