Struct aws_sdk_computeoptimizer::types::builders::UtilizationMetricBuilder

source · 
#[non_exhaustive]
pub struct UtilizationMetricBuilder { /* private fields */ }
Expand description

A builder for UtilizationMetric.

Implementations§

source§

impl UtilizationMetricBuilder

source

pub fn name(self, input: MetricName) -> Self

The name of the utilization metric.

The following utilization metrics are available:

  • Cpu - The percentage of allocated EC2 compute units that are currently in use on the instance. This metric identifies the processing power required to run an application on the instance.

    Depending on the instance type, tools in your operating system can show a lower percentage than CloudWatch when the instance is not allocated a full processor core.

    Units: Percent

  • Memory - The percentage of memory that is currently in use on the instance. This metric identifies the amount of memory required to run an application on the instance.

    Units: Percent

    The Memory metric is returned only for resources that have the unified CloudWatch agent installed on them. For more information, see Enabling Memory Utilization with the CloudWatch Agent.

  • GPU - The percentage of allocated GPUs that currently run on the instance.

  • GPU_MEMORY - The percentage of total GPU memory that currently runs on the instance.

    The GPU and GPU_MEMORY metrics are only returned for resources with the unified CloudWatch Agent installed on them. For more information, see Enabling NVIDIA GPU utilization with the CloudWatch Agent.

  • EBS_READ_OPS_PER_SECOND - The completed read operations from all EBS volumes attached to the instance in a specified period of time.

    Unit: Count

  • EBS_WRITE_OPS_PER_SECOND - The completed write operations to all EBS volumes attached to the instance in a specified period of time.

    Unit: Count

  • EBS_READ_BYTES_PER_SECOND - The bytes read from all EBS volumes attached to the instance in a specified period of time.

    Unit: Bytes

  • EBS_WRITE_BYTES_PER_SECOND - The bytes written to all EBS volumes attached to the instance in a specified period of time.

    Unit: Bytes

  • DISK_READ_OPS_PER_SECOND - The completed read operations from all instance store volumes available to the instance in a specified period of time.

    If there are no instance store volumes, either the value is 0 or the metric is not reported.

  • DISK_WRITE_OPS_PER_SECOND - The completed write operations from all instance store volumes available to the instance in a specified period of time.

    If there are no instance store volumes, either the value is 0 or the metric is not reported.

  • DISK_READ_BYTES_PER_SECOND - The bytes read from all instance store volumes available to the instance. This metric is used to determine the volume of the data the application reads from the disk of the instance. This can be used to determine the speed of the application.

    If there are no instance store volumes, either the value is 0 or the metric is not reported.

  • DISK_WRITE_BYTES_PER_SECOND - The bytes written to all instance store volumes available to the instance. This metric is used to determine the volume of the data the application writes onto the disk of the instance. This can be used to determine the speed of the application.

    If there are no instance store volumes, either the value is 0 or the metric is not reported.

  • NETWORK_IN_BYTES_PER_SECOND - The number of bytes received by the instance on all network interfaces. This metric identifies the volume of incoming network traffic to a single instance.

  • NETWORK_OUT_BYTES_PER_SECOND - The number of bytes sent out by the instance on all network interfaces. This metric identifies the volume of outgoing network traffic from a single instance.

  • NETWORK_PACKETS_IN_PER_SECOND - The number of packets received by the instance on all network interfaces. This metric identifies the volume of incoming traffic in terms of the number of packets on a single instance.

  • NETWORK_PACKETS_OUT_PER_SECOND - The number of packets sent out by the instance on all network interfaces. This metric identifies the volume of outgoing traffic in terms of the number of packets on a single instance.

source

pub fn set_name(self, input: Option<MetricName>) -> Self

The name of the utilization metric.

The following utilization metrics are available:

  • Cpu - The percentage of allocated EC2 compute units that are currently in use on the instance. This metric identifies the processing power required to run an application on the instance.

    Depending on the instance type, tools in your operating system can show a lower percentage than CloudWatch when the instance is not allocated a full processor core.

    Units: Percent

  • Memory - The percentage of memory that is currently in use on the instance. This metric identifies the amount of memory required to run an application on the instance.

    Units: Percent

    The Memory metric is returned only for resources that have the unified CloudWatch agent installed on them. For more information, see Enabling Memory Utilization with the CloudWatch Agent.

  • GPU - The percentage of allocated GPUs that currently run on the instance.

  • GPU_MEMORY - The percentage of total GPU memory that currently runs on the instance.

    The GPU and GPU_MEMORY metrics are only returned for resources with the unified CloudWatch Agent installed on them. For more information, see Enabling NVIDIA GPU utilization with the CloudWatch Agent.

  • EBS_READ_OPS_PER_SECOND - The completed read operations from all EBS volumes attached to the instance in a specified period of time.

    Unit: Count

  • EBS_WRITE_OPS_PER_SECOND - The completed write operations to all EBS volumes attached to the instance in a specified period of time.

    Unit: Count

  • EBS_READ_BYTES_PER_SECOND - The bytes read from all EBS volumes attached to the instance in a specified period of time.

    Unit: Bytes

  • EBS_WRITE_BYTES_PER_SECOND - The bytes written to all EBS volumes attached to the instance in a specified period of time.

    Unit: Bytes

  • DISK_READ_OPS_PER_SECOND - The completed read operations from all instance store volumes available to the instance in a specified period of time.

    If there are no instance store volumes, either the value is 0 or the metric is not reported.

  • DISK_WRITE_OPS_PER_SECOND - The completed write operations from all instance store volumes available to the instance in a specified period of time.

    If there are no instance store volumes, either the value is 0 or the metric is not reported.

  • DISK_READ_BYTES_PER_SECOND - The bytes read from all instance store volumes available to the instance. This metric is used to determine the volume of the data the application reads from the disk of the instance. This can be used to determine the speed of the application.

    If there are no instance store volumes, either the value is 0 or the metric is not reported.

  • DISK_WRITE_BYTES_PER_SECOND - The bytes written to all instance store volumes available to the instance. This metric is used to determine the volume of the data the application writes onto the disk of the instance. This can be used to determine the speed of the application.

    If there are no instance store volumes, either the value is 0 or the metric is not reported.

  • NETWORK_IN_BYTES_PER_SECOND - The number of bytes received by the instance on all network interfaces. This metric identifies the volume of incoming network traffic to a single instance.

  • NETWORK_OUT_BYTES_PER_SECOND - The number of bytes sent out by the instance on all network interfaces. This metric identifies the volume of outgoing network traffic from a single instance.

  • NETWORK_PACKETS_IN_PER_SECOND - The number of packets received by the instance on all network interfaces. This metric identifies the volume of incoming traffic in terms of the number of packets on a single instance.

  • NETWORK_PACKETS_OUT_PER_SECOND - The number of packets sent out by the instance on all network interfaces. This metric identifies the volume of outgoing traffic in terms of the number of packets on a single instance.

source

pub fn get_name(&self) -> &Option<MetricName>

The name of the utilization metric.

The following utilization metrics are available:

  • Cpu - The percentage of allocated EC2 compute units that are currently in use on the instance. This metric identifies the processing power required to run an application on the instance.

    Depending on the instance type, tools in your operating system can show a lower percentage than CloudWatch when the instance is not allocated a full processor core.

    Units: Percent

  • Memory - The percentage of memory that is currently in use on the instance. This metric identifies the amount of memory required to run an application on the instance.

    Units: Percent

    The Memory metric is returned only for resources that have the unified CloudWatch agent installed on them. For more information, see Enabling Memory Utilization with the CloudWatch Agent.

  • GPU - The percentage of allocated GPUs that currently run on the instance.

  • GPU_MEMORY - The percentage of total GPU memory that currently runs on the instance.

    The GPU and GPU_MEMORY metrics are only returned for resources with the unified CloudWatch Agent installed on them. For more information, see Enabling NVIDIA GPU utilization with the CloudWatch Agent.

  • EBS_READ_OPS_PER_SECOND - The completed read operations from all EBS volumes attached to the instance in a specified period of time.

    Unit: Count

  • EBS_WRITE_OPS_PER_SECOND - The completed write operations to all EBS volumes attached to the instance in a specified period of time.

    Unit: Count

  • EBS_READ_BYTES_PER_SECOND - The bytes read from all EBS volumes attached to the instance in a specified period of time.

    Unit: Bytes

  • EBS_WRITE_BYTES_PER_SECOND - The bytes written to all EBS volumes attached to the instance in a specified period of time.

    Unit: Bytes

  • DISK_READ_OPS_PER_SECOND - The completed read operations from all instance store volumes available to the instance in a specified period of time.

    If there are no instance store volumes, either the value is 0 or the metric is not reported.

  • DISK_WRITE_OPS_PER_SECOND - The completed write operations from all instance store volumes available to the instance in a specified period of time.

    If there are no instance store volumes, either the value is 0 or the metric is not reported.

  • DISK_READ_BYTES_PER_SECOND - The bytes read from all instance store volumes available to the instance. This metric is used to determine the volume of the data the application reads from the disk of the instance. This can be used to determine the speed of the application.

    If there are no instance store volumes, either the value is 0 or the metric is not reported.

  • DISK_WRITE_BYTES_PER_SECOND - The bytes written to all instance store volumes available to the instance. This metric is used to determine the volume of the data the application writes onto the disk of the instance. This can be used to determine the speed of the application.

    If there are no instance store volumes, either the value is 0 or the metric is not reported.

  • NETWORK_IN_BYTES_PER_SECOND - The number of bytes received by the instance on all network interfaces. This metric identifies the volume of incoming network traffic to a single instance.

  • NETWORK_OUT_BYTES_PER_SECOND - The number of bytes sent out by the instance on all network interfaces. This metric identifies the volume of outgoing network traffic from a single instance.

  • NETWORK_PACKETS_IN_PER_SECOND - The number of packets received by the instance on all network interfaces. This metric identifies the volume of incoming traffic in terms of the number of packets on a single instance.

  • NETWORK_PACKETS_OUT_PER_SECOND - The number of packets sent out by the instance on all network interfaces. This metric identifies the volume of outgoing traffic in terms of the number of packets on a single instance.

source

pub fn statistic(self, input: MetricStatistic) -> Self

The statistic of the utilization metric.

The Compute Optimizer API, Command Line Interface (CLI), and SDKs return utilization metrics using only the Maximum statistic, which is the highest value observed during the specified period.

The Compute Optimizer console displays graphs for some utilization metrics using the Average statistic, which is the value of Sum / SampleCount during the specified period. For more information, see Viewing resource recommendations in the Compute Optimizer User Guide. You can also get averaged utilization metric data for your resources using Amazon CloudWatch. For more information, see the Amazon CloudWatch User Guide.

source

pub fn set_statistic(self, input: Option<MetricStatistic>) -> Self

The statistic of the utilization metric.

The Compute Optimizer API, Command Line Interface (CLI), and SDKs return utilization metrics using only the Maximum statistic, which is the highest value observed during the specified period.

The Compute Optimizer console displays graphs for some utilization metrics using the Average statistic, which is the value of Sum / SampleCount during the specified period. For more information, see Viewing resource recommendations in the Compute Optimizer User Guide. You can also get averaged utilization metric data for your resources using Amazon CloudWatch. For more information, see the Amazon CloudWatch User Guide.

source

pub fn get_statistic(&self) -> &Option<MetricStatistic>

The statistic of the utilization metric.

The Compute Optimizer API, Command Line Interface (CLI), and SDKs return utilization metrics using only the Maximum statistic, which is the highest value observed during the specified period.

The Compute Optimizer console displays graphs for some utilization metrics using the Average statistic, which is the value of Sum / SampleCount during the specified period. For more information, see Viewing resource recommendations in the Compute Optimizer User Guide. You can also get averaged utilization metric data for your resources using Amazon CloudWatch. For more information, see the Amazon CloudWatch User Guide.

source

pub fn value(self, input: f64) -> Self

The value of the utilization metric.

source

pub fn set_value(self, input: Option<f64>) -> Self

The value of the utilization metric.

source

pub fn get_value(&self) -> &Option<f64>

The value of the utilization metric.

source

pub fn build(self) -> UtilizationMetric

Consumes the builder and constructs a UtilizationMetric.

Trait Implementations§

source§

impl Clone for UtilizationMetricBuilder

source§

fn clone(&self) -> UtilizationMetricBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for UtilizationMetricBuilder

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for UtilizationMetricBuilder

source§

fn default() -> UtilizationMetricBuilder

Returns the “default value” for a type. Read more
source§

impl PartialEq for UtilizationMetricBuilder

source§

fn eq(&self, other: &UtilizationMetricBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl StructuralPartialEq for UtilizationMetricBuilder

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more