Struct aws_sdk_computeoptimizer::model::utilization_metric::Builder

#[non_exhaustive]
pub struct Builder { /* fields omitted */ }

A builder for UtilizationMetric

Implementations

impl Builder

pub fn name(self, input: MetricName) -> Self

The name of the utilization metric.

The following utilization metrics are available:

• Cpu - The percentage of allocated EC2 compute units that are currently in use on the instance. This metric identifies the processing power required to run an application on the instance.

  Depending on the instance type, tools in your operating system can show a lower percentage than CloudWatch when the instance is not allocated a full processor core.

  Units: Percent

• Memory - The percentage of memory that is currently in use on the instance. This metric identifies the amount of memory required to run an application on the instance.

  Units: Percent

  The Memory metric is returned only for resources that have the unified CloudWatch agent installed on them. For more information, see Enabling Memory Utilization with the CloudWatch Agent.

• EBS_READ_OPS_PER_SECOND - The completed read operations from all EBS volumes attached to the instance in a specified period of time.

  Unit: Count

• EBS_WRITE_OPS_PER_SECOND - The completed write operations to all EBS volumes attached to the instance in a specified period of time.

  Unit: Count

• EBS_READ_BYTES_PER_SECOND - The bytes read from all EBS volumes attached to the instance in a specified period of time.

  Unit: Bytes

• EBS_WRITE_BYTES_PER_SECOND - The bytes written to all EBS volumes attached to the instance in a specified period of time.

  Unit: Bytes

• DISK_READ_OPS_PER_SECOND - The completed read operations from all instance store volumes available to the instance in a specified period of time.

  If there are no instance store volumes, either the value is 0 or the metric is not reported.

• DISK_WRITE_OPS_PER_SECOND - The completed write operations from all instance store volumes available to the instance in a specified period of time.

  If there are no instance store volumes, either the value is 0 or the metric is not reported.

• DISK_READ_BYTES_PER_SECOND - The bytes read from all instance store volumes available to the instance. This metric is used to determine the volume of the data the application reads from the disk of the instance. This can be used to determine the speed of the application.

  If there are no instance store volumes, either the value is 0 or the metric is not reported.

• DISK_WRITE_BYTES_PER_SECOND - The bytes written to all instance store volumes available to the instance. This metric is used to determine the volume of the data the application writes onto the disk of the instance. This can be used to determine the speed of the application.

  If there are no instance store volumes, either the value is 0 or the metric is not reported.

• NETWORK_IN_BYTES_PER_SECOND - The number of bytes received by the instance on all network interfaces. This metric identifies the volume of incoming network traffic to a single instance.

• NETWORK_OUT_BYTES_PER_SECOND - The number of bytes sent out by the instance on all network interfaces. This metric identifies the volume of outgoing network traffic from a single instance.

• NETWORK_PACKETS_IN_PER_SECOND - The number of packets received by the instance on all network interfaces. This metric identifies the volume of incoming traffic in terms of the number of packets on a single instance.

• NETWORK_PACKETS_OUT_PER_SECOND - The number of packets sent out by the instance on all network interfaces. This metric identifies the volume of outgoing traffic in terms of the number of packets on a single instance.

pub fn set_name(self, input: Option<MetricName>) -> Self

The name of the utilization metric.

The following utilization metrics are available:

• Cpu - The percentage of allocated EC2 compute units that are currently in use on the instance. This metric identifies the processing power required to run an application on the instance.

  Depending on the instance type, tools in your operating system can show a lower percentage than CloudWatch when the instance is not allocated a full processor core.

  Units: Percent

• Memory - The percentage of memory that is currently in use on the instance. This metric identifies the amount of memory required to run an application on the instance.

  Units: Percent

  The Memory metric is returned only for resources that have the unified CloudWatch agent installed on them. For more information, see Enabling Memory Utilization with the CloudWatch Agent.

• EBS_READ_OPS_PER_SECOND - The completed read operations from all EBS volumes attached to the instance in a specified period of time.

  Unit: Count

• EBS_WRITE_OPS_PER_SECOND - The completed write operations to all EBS volumes attached to the instance in a specified period of time.

  Unit: Count

• EBS_READ_BYTES_PER_SECOND - The bytes read from all EBS volumes attached to the instance in a specified period of time.

  Unit: Bytes

• EBS_WRITE_BYTES_PER_SECOND - The bytes written to all EBS volumes attached to the instance in a specified period of time.

  Unit: Bytes

• DISK_READ_OPS_PER_SECOND - The completed read operations from all instance store volumes available to the instance in a specified period of time.

  If there are no instance store volumes, either the value is 0 or the metric is not reported.

• DISK_WRITE_OPS_PER_SECOND - The completed write operations from all instance store volumes available to the instance in a specified period of time.

  If there are no instance store volumes, either the value is 0 or the metric is not reported.

• DISK_READ_BYTES_PER_SECOND - The bytes read from all instance store volumes available to the instance. This metric is used to determine the volume of the data the application reads from the disk of the instance. This can be used to determine the speed of the application.

  If there are no instance store volumes, either the value is 0 or the metric is not reported.

• DISK_WRITE_BYTES_PER_SECOND - The bytes written to all instance store volumes available to the instance. This metric is used to determine the volume of the data the application writes onto the disk of the instance. This can be used to determine the speed of the application.

  If there are no instance store volumes, either the value is 0 or the metric is not reported.

• NETWORK_IN_BYTES_PER_SECOND - The number of bytes received by the instance on all network interfaces. This metric identifies the volume of incoming network traffic to a single instance.

• NETWORK_OUT_BYTES_PER_SECOND - The number of bytes sent out by the instance on all network interfaces. This metric identifies the volume of outgoing network traffic from a single instance.

• NETWORK_PACKETS_IN_PER_SECOND - The number of packets received by the instance on all network interfaces. This metric identifies the volume of incoming traffic in terms of the number of packets on a single instance.

• NETWORK_PACKETS_OUT_PER_SECOND - The number of packets sent out by the instance on all network interfaces. This metric identifies the volume of outgoing traffic in terms of the number of packets on a single instance.

pub fn statistic(self, input: MetricStatistic) -> Self

The statistic of the utilization metric.

The Compute Optimizer API, Command Line Interface (CLI), and SDKs return utilization metrics using only the Maximum statistic, which is the highest value observed during the specified period.

The Compute Optimizer console displays graphs for some utilization metrics using the Average statistic, which is the value of Sum / SampleCount during the specified period. For more information, see Viewing resource recommendations in the Compute Optimizer User Guide. You can also get averaged utilization metric data for your resources using Amazon CloudWatch. For more information, see the Amazon CloudWatch User Guide.

pub fn set_statistic(self, input: Option<MetricStatistic>) -> Self

The statistic of the utilization metric.

The Compute Optimizer API, Command Line Interface (CLI), and SDKs return utilization metrics using only the Maximum statistic, which is the highest value observed during the specified period.

The Compute Optimizer console displays graphs for some utilization metrics using the Average statistic, which is the value of Sum / SampleCount during the specified period. For more information, see Viewing resource recommendations in the Compute Optimizer User Guide. You can also get averaged utilization metric data for your resources using Amazon CloudWatch. For more information, see the Amazon CloudWatch User Guide.

pub fn value(self, input: f64) -> Self

The value of the utilization metric.

pub fn set_value(self, input: Option<f64>) -> Self

The value of the utilization metric.

pub fn build(self) -> UtilizationMetric

Consumes the builder and constructs a UtilizationMetric

Trait Implementations

impl Clone for Builder

fn clone(&self) -> Builder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Builder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Builder

fn default() -> Builder

Returns the “default value” for a type.

impl PartialEq<Builder> for Builder

fn eq(&self, other: &Builder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Builder) -> bool

This method tests for !=.

impl StructuralPartialEq for Builder