Struct aws_sdk_comprehendmedical::client::Client

pub struct Client<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

An ergonomic service client for ComprehendMedical_20181030.

This client allows ergonomic access to a ComprehendMedical_20181030-shaped service. Each method corresponds to an endpoint defined in the service’s Smithy model, and the request and response shapes are auto-generated from that same model.

Using a Client

Once you have a client set up, you can access the service’s endpoints by calling the appropriate method on Client. Each such method returns a request builder for that endpoint, with methods for setting the various fields of the request. Once your request is complete, use the send method to send the request. send returns a future, which you then have to .await to get the service’s response.

Implementations

impl<C, M, R> Client<C, M, R>

pub fn with_config(client: Client<C, M, R>, conf: Config) -> Self

Creates a client with the given service configuration.

pub fn conf(&self) -> &Config

Returns the client’s configuration.

impl<C, M, R> Client<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub fn describe_entities_detection_v2_job(
    &self
) -> DescribeEntitiesDetectionV2Job<C, M, R>

Constructs a fluent builder for the DescribeEntitiesDetectionV2Job operation.

See DescribeEntitiesDetectionV2Job for more information about the operation and its arguments.

pub fn describe_icd10_cm_inference_job(
    &self
) -> DescribeICD10CMInferenceJob<C, M, R>

Constructs a fluent builder for the DescribeICD10CMInferenceJob operation.

See DescribeICD10CMInferenceJob for more information about the operation and its arguments.

pub fn describe_phi_detection_job(&self) -> DescribePHIDetectionJob<C, M, R>

Constructs a fluent builder for the DescribePHIDetectionJob operation.

See DescribePHIDetectionJob for more information about the operation and its arguments.

pub fn describe_rx_norm_inference_job(
    &self
) -> DescribeRxNormInferenceJob<C, M, R>

Constructs a fluent builder for the DescribeRxNormInferenceJob operation.

See DescribeRxNormInferenceJob for more information about the operation and its arguments.

pub fn detect_entities(&self) -> DetectEntities<C, M, R>

Constructs a fluent builder for the DetectEntities operation.

See DetectEntities for more information about the operation and its arguments.

pub fn detect_entities_v2(&self) -> DetectEntitiesV2<C, M, R>

Constructs a fluent builder for the DetectEntitiesV2 operation.

See DetectEntitiesV2 for more information about the operation and its arguments.

pub fn detect_phi(&self) -> DetectPHI<C, M, R>

Constructs a fluent builder for the DetectPHI operation.

See DetectPHI for more information about the operation and its arguments.

pub fn infer_icd10_cm(&self) -> InferICD10CM<C, M, R>

Constructs a fluent builder for the InferICD10CM operation.

See InferICD10CM for more information about the operation and its arguments.

pub fn infer_rx_norm(&self) -> InferRxNorm<C, M, R>

Constructs a fluent builder for the InferRxNorm operation.

See InferRxNorm for more information about the operation and its arguments.

pub fn list_entities_detection_v2_jobs(
    &self
) -> ListEntitiesDetectionV2Jobs<C, M, R>

Constructs a fluent builder for the ListEntitiesDetectionV2Jobs operation.

See ListEntitiesDetectionV2Jobs for more information about the operation and its arguments.

pub fn list_icd10_cm_inference_jobs(&self) -> ListICD10CMInferenceJobs<C, M, R>

Constructs a fluent builder for the ListICD10CMInferenceJobs operation.

See ListICD10CMInferenceJobs for more information about the operation and its arguments.

pub fn list_phi_detection_jobs(&self) -> ListPHIDetectionJobs<C, M, R>

Constructs a fluent builder for the ListPHIDetectionJobs operation.

See ListPHIDetectionJobs for more information about the operation and its arguments.

pub fn list_rx_norm_inference_jobs(&self) -> ListRxNormInferenceJobs<C, M, R>

Constructs a fluent builder for the ListRxNormInferenceJobs operation.

See ListRxNormInferenceJobs for more information about the operation and its arguments.

pub fn start_entities_detection_v2_job(
    &self
) -> StartEntitiesDetectionV2Job<C, M, R>

Constructs a fluent builder for the StartEntitiesDetectionV2Job operation.

See StartEntitiesDetectionV2Job for more information about the operation and its arguments.

pub fn start_icd10_cm_inference_job(&self) -> StartICD10CMInferenceJob<C, M, R>

Constructs a fluent builder for the StartICD10CMInferenceJob operation.

See StartICD10CMInferenceJob for more information about the operation and its arguments.

pub fn start_phi_detection_job(&self) -> StartPHIDetectionJob<C, M, R>

Constructs a fluent builder for the StartPHIDetectionJob operation.

See StartPHIDetectionJob for more information about the operation and its arguments.

pub fn start_rx_norm_inference_job(&self) -> StartRxNormInferenceJob<C, M, R>

Constructs a fluent builder for the StartRxNormInferenceJob operation.

See StartRxNormInferenceJob for more information about the operation and its arguments.

pub fn stop_entities_detection_v2_job(
    &self
) -> StopEntitiesDetectionV2Job<C, M, R>

Constructs a fluent builder for the StopEntitiesDetectionV2Job operation.

See StopEntitiesDetectionV2Job for more information about the operation and its arguments.

pub fn stop_icd10_cm_inference_job(&self) -> StopICD10CMInferenceJob<C, M, R>

Constructs a fluent builder for the StopICD10CMInferenceJob operation.

See StopICD10CMInferenceJob for more information about the operation and its arguments.

pub fn stop_phi_detection_job(&self) -> StopPHIDetectionJob<C, M, R>

Constructs a fluent builder for the StopPHIDetectionJob operation.

See StopPHIDetectionJob for more information about the operation and its arguments.

pub fn stop_rx_norm_inference_job(&self) -> StopRxNormInferenceJob<C, M, R>

Constructs a fluent builder for the StopRxNormInferenceJob operation.

See StopRxNormInferenceJob for more information about the operation and its arguments.

impl<C> Client<C, AwsMiddleware, Standard>

pub fn from_conf_conn(conf: Config, conn: C) -> Self

Creates a client with the given service config and connector override.

impl Client<DynConnector, AwsMiddleware, Standard>

pub fn new(config: &Config) -> Self

Creates a new client from a shared config.

pub fn from_conf(conf: Config) -> Self

Creates a new client from the service Config.

Trait Implementations

impl<C, M, R> Clone for Client<C, M, R>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C: Debug, M: Debug, R: Debug> Debug for Client<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<C, M, R> From<Client<C, M, R>> for Client<C, M, R>

fn from(client: Client<C, M, R>) -> Self

Performs the conversion.