Struct aws_sdk_cognitoidentityprovider::types::EmailConfigurationType

#[non_exhaustive]
pub struct EmailConfigurationType {
    pub source_arn: Option<String>,
    pub reply_to_email_address: Option<String>,
    pub email_sending_account: Option<EmailSendingAccountType>,
    pub from: Option<String>,
    pub configuration_set: Option<String>,
}

The email configuration of your user pool. The email configuration type sets your preferred sending method, Amazon Web Services Region, and sender for messages from your user pool.

Amazon Cognito can send email messages with Amazon Simple Email Service resources in the Amazon Web Services Region where you created your user pool, and in alternate Regions in some cases. For more information on the supported Regions, see Email settings for Amazon Cognito user pools.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

source_arn: Option<String>

The ARN of a verified email address or an address from a verified domain in Amazon SES. You can set a SourceArn email from a verified domain only with an API request. You can set a verified email address, but not an address in a verified domain, in the Amazon Cognito console. Amazon Cognito uses the email address that you provide in one of the following ways, depending on the value that you specify for the EmailSendingAccount parameter:

• If you specify COGNITO_DEFAULT, Amazon Cognito uses this address as the custom FROM address when it emails your users using its built-in email account.

• If you specify DEVELOPER, Amazon Cognito emails your users with this address by calling Amazon SES on your behalf.

The Region value of the SourceArn parameter must indicate a supported Amazon Web Services Region of your user pool. Typically, the Region in the SourceArn and the user pool Region are the same. For more information, see Amazon SES email configuration regions in the Amazon Cognito Developer Guide.

reply_to_email_address: Option<String>

The destination to which the receiver of the email should reply.

email_sending_account: Option<EmailSendingAccountType>

Specifies whether Amazon Cognito uses its built-in functionality to send your users email messages, or uses your Amazon Simple Email Service email configuration. Specify one of the following values:

COGNITO_DEFAULT

When Amazon Cognito emails your users, it uses its built-in email functionality. When you use the default option, Amazon Cognito allows only a limited number of emails each day for your user pool. For typical production environments, the default email limit is less than the required delivery volume. To achieve a higher delivery volume, specify DEVELOPER to use your Amazon SES email configuration.

To look up the email delivery limit for the default option, see Limits in the Amazon Cognito Developer Guide.

The default FROM address is no-reply@verificationemail.com. To customize the FROM address, provide the Amazon Resource Name (ARN) of an Amazon SES verified email address for the SourceArn parameter.

DEVELOPER

When Amazon Cognito emails your users, it uses your Amazon SES configuration. Amazon Cognito calls Amazon SES on your behalf to send email from your verified email address. When you use this option, the email delivery limits are the same limits that apply to your Amazon SES verified email address in your Amazon Web Services account.

If you use this option, provide the ARN of an Amazon SES verified email address for the SourceArn parameter.

Before Amazon Cognito can email your users, it requires additional permissions to call Amazon SES on your behalf. When you update your user pool with this option, Amazon Cognito creates a service-linked role, which is a type of role in your Amazon Web Services account. This role contains the permissions that allow you to access Amazon SES and send email messages from your email address. For more information about the service-linked role that Amazon Cognito creates, see Using Service-Linked Roles for Amazon Cognito in the Amazon Cognito Developer Guide.

from: Option<String>

Either the sender’s email address or the sender’s name with their email address. For example, testuser@example.com or Test User . This address appears before the body of the email.

configuration_set: Option<String>

The set of configuration rules that can be applied to emails sent using Amazon Simple Email Service. A configuration set is applied to an email by including a reference to the configuration set in the headers of the email. Once applied, all of the rules in that configuration set are applied to the email. Configuration sets can be used to apply the following types of rules to emails:

Event publishing

Amazon Simple Email Service can track the number of send, delivery, open, click, bounce, and complaint events for each email sent. Use event publishing to send information about these events to other Amazon Web Services services such as and Amazon CloudWatch

IP pool management

When leasing dedicated IP addresses with Amazon Simple Email Service, you can create groups of IP addresses, called dedicated IP pools. You can then associate the dedicated IP pools with configuration sets.

Implementations

impl EmailConfigurationType

pub fn source_arn(&self) -> Option<&str>

The ARN of a verified email address or an address from a verified domain in Amazon SES. You can set a SourceArn email from a verified domain only with an API request. You can set a verified email address, but not an address in a verified domain, in the Amazon Cognito console. Amazon Cognito uses the email address that you provide in one of the following ways, depending on the value that you specify for the EmailSendingAccount parameter:

• If you specify COGNITO_DEFAULT, Amazon Cognito uses this address as the custom FROM address when it emails your users using its built-in email account.

• If you specify DEVELOPER, Amazon Cognito emails your users with this address by calling Amazon SES on your behalf.

The Region value of the SourceArn parameter must indicate a supported Amazon Web Services Region of your user pool. Typically, the Region in the SourceArn and the user pool Region are the same. For more information, see Amazon SES email configuration regions in the Amazon Cognito Developer Guide.

pub fn reply_to_email_address(&self) -> Option<&str>

The destination to which the receiver of the email should reply.

pub fn email_sending_account(&self) -> Option<&EmailSendingAccountType>

Specifies whether Amazon Cognito uses its built-in functionality to send your users email messages, or uses your Amazon Simple Email Service email configuration. Specify one of the following values:

COGNITO_DEFAULT

When Amazon Cognito emails your users, it uses its built-in email functionality. When you use the default option, Amazon Cognito allows only a limited number of emails each day for your user pool. For typical production environments, the default email limit is less than the required delivery volume. To achieve a higher delivery volume, specify DEVELOPER to use your Amazon SES email configuration.

To look up the email delivery limit for the default option, see Limits in the Amazon Cognito Developer Guide.

The default FROM address is no-reply@verificationemail.com. To customize the FROM address, provide the Amazon Resource Name (ARN) of an Amazon SES verified email address for the SourceArn parameter.

DEVELOPER

When Amazon Cognito emails your users, it uses your Amazon SES configuration. Amazon Cognito calls Amazon SES on your behalf to send email from your verified email address. When you use this option, the email delivery limits are the same limits that apply to your Amazon SES verified email address in your Amazon Web Services account.

If you use this option, provide the ARN of an Amazon SES verified email address for the SourceArn parameter.

Before Amazon Cognito can email your users, it requires additional permissions to call Amazon SES on your behalf. When you update your user pool with this option, Amazon Cognito creates a service-linked role, which is a type of role in your Amazon Web Services account. This role contains the permissions that allow you to access Amazon SES and send email messages from your email address. For more information about the service-linked role that Amazon Cognito creates, see Using Service-Linked Roles for Amazon Cognito in the Amazon Cognito Developer Guide.

pub fn from(&self) -> Option<&str>

Either the sender’s email address or the sender’s name with their email address. For example, testuser@example.com or Test User . This address appears before the body of the email.

pub fn configuration_set(&self) -> Option<&str>

The set of configuration rules that can be applied to emails sent using Amazon Simple Email Service. A configuration set is applied to an email by including a reference to the configuration set in the headers of the email. Once applied, all of the rules in that configuration set are applied to the email. Configuration sets can be used to apply the following types of rules to emails:

Event publishing

Amazon Simple Email Service can track the number of send, delivery, open, click, bounce, and complaint events for each email sent. Use event publishing to send information about these events to other Amazon Web Services services such as and Amazon CloudWatch

IP pool management

When leasing dedicated IP addresses with Amazon Simple Email Service, you can create groups of IP addresses, called dedicated IP pools. You can then associate the dedicated IP pools with configuration sets.

impl EmailConfigurationType

pub fn builder() -> EmailConfigurationTypeBuilder

Creates a new builder-style object to manufacture EmailConfigurationType.

Trait Implementations

impl Clone for EmailConfigurationType

fn clone(&self) -> EmailConfigurationType

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for EmailConfigurationType

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for EmailConfigurationType

fn eq(&self, other: &EmailConfigurationType) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for EmailConfigurationType