Struct aws_sdk_cognitoidentityprovider::operation::initiate_auth::builders::InitiateAuthOutputBuilder

#[non_exhaustive]
pub struct InitiateAuthOutputBuilder { /* private fields */ }

A builder for InitiateAuthOutput.

Implementations

impl InitiateAuthOutputBuilder

pub fn challenge_name(self, input: ChallengeNameType) -> Self

The name of the challenge that you're responding to with this call. This name is returned in the InitiateAuth response if you must pass another challenge.

Valid values include the following:

All of the following challenges require USERNAME and SECRET_HASH (if applicable) in the parameters.

• SMS_MFA: Next challenge is to supply an SMS_MFA_CODE, delivered via SMS.

• PASSWORD_VERIFIER: Next challenge is to supply PASSWORD_CLAIM_SIGNATURE, PASSWORD_CLAIM_SECRET_BLOCK, and TIMESTAMP after the client-side SRP calculations.

• CUSTOM_CHALLENGE: This is returned if your custom authentication flow determines that the user should pass another challenge before tokens are issued.

• DEVICE_SRP_AUTH: If device tracking was activated on your user pool and the previous challenges were passed, this challenge is returned so that Amazon Cognito can start tracking this device.

• DEVICE_PASSWORD_VERIFIER: Similar to PASSWORD_VERIFIER, but for devices only.

• NEW_PASSWORD_REQUIRED: For users who are required to change their passwords after successful first login.

  Respond to this challenge with NEW_PASSWORD and any required attributes that Amazon Cognito returned in the requiredAttributes parameter. You can also set values for attributes that aren't required by your user pool and that your app client can write. For more information, see RespondToAuthChallenge.

  In a NEW_PASSWORD_REQUIRED challenge response, you can't modify a required attribute that already has a value. In RespondToAuthChallenge, set a value for any keys that Amazon Cognito returned in the requiredAttributes parameter, then use the UpdateUserAttributes API operation to modify the value of any additional attributes.

• MFA_SETUP: For users who are required to setup an MFA factor before they can sign in. The MFA types activated for the user pool will be listed in the challenge parameters MFAS_CAN_SETUP value.

  To set up software token MFA, use the session returned here from InitiateAuth as an input to AssociateSoftwareToken. Use the session returned by VerifySoftwareToken as an input to RespondToAuthChallenge with challenge name MFA_SETUP to complete sign-in. To set up SMS MFA, an administrator should help the user to add a phone number to their account, and then the user should call InitiateAuth again to restart sign-in.

pub fn set_challenge_name(self, input: Option<ChallengeNameType>) -> Self

The name of the challenge that you're responding to with this call. This name is returned in the InitiateAuth response if you must pass another challenge.

Valid values include the following:

All of the following challenges require USERNAME and SECRET_HASH (if applicable) in the parameters.

• SMS_MFA: Next challenge is to supply an SMS_MFA_CODE, delivered via SMS.

• PASSWORD_VERIFIER: Next challenge is to supply PASSWORD_CLAIM_SIGNATURE, PASSWORD_CLAIM_SECRET_BLOCK, and TIMESTAMP after the client-side SRP calculations.

• CUSTOM_CHALLENGE: This is returned if your custom authentication flow determines that the user should pass another challenge before tokens are issued.

• DEVICE_SRP_AUTH: If device tracking was activated on your user pool and the previous challenges were passed, this challenge is returned so that Amazon Cognito can start tracking this device.

• DEVICE_PASSWORD_VERIFIER: Similar to PASSWORD_VERIFIER, but for devices only.

• NEW_PASSWORD_REQUIRED: For users who are required to change their passwords after successful first login.

  Respond to this challenge with NEW_PASSWORD and any required attributes that Amazon Cognito returned in the requiredAttributes parameter. You can also set values for attributes that aren't required by your user pool and that your app client can write. For more information, see RespondToAuthChallenge.

  In a NEW_PASSWORD_REQUIRED challenge response, you can't modify a required attribute that already has a value. In RespondToAuthChallenge, set a value for any keys that Amazon Cognito returned in the requiredAttributes parameter, then use the UpdateUserAttributes API operation to modify the value of any additional attributes.

• MFA_SETUP: For users who are required to setup an MFA factor before they can sign in. The MFA types activated for the user pool will be listed in the challenge parameters MFAS_CAN_SETUP value.

  To set up software token MFA, use the session returned here from InitiateAuth as an input to AssociateSoftwareToken. Use the session returned by VerifySoftwareToken as an input to RespondToAuthChallenge with challenge name MFA_SETUP to complete sign-in. To set up SMS MFA, an administrator should help the user to add a phone number to their account, and then the user should call InitiateAuth again to restart sign-in.

pub fn get_challenge_name(&self) -> &Option<ChallengeNameType>

The name of the challenge that you're responding to with this call. This name is returned in the InitiateAuth response if you must pass another challenge.

Valid values include the following:

All of the following challenges require USERNAME and SECRET_HASH (if applicable) in the parameters.

• SMS_MFA: Next challenge is to supply an SMS_MFA_CODE, delivered via SMS.

• PASSWORD_VERIFIER: Next challenge is to supply PASSWORD_CLAIM_SIGNATURE, PASSWORD_CLAIM_SECRET_BLOCK, and TIMESTAMP after the client-side SRP calculations.

• CUSTOM_CHALLENGE: This is returned if your custom authentication flow determines that the user should pass another challenge before tokens are issued.

• DEVICE_SRP_AUTH: If device tracking was activated on your user pool and the previous challenges were passed, this challenge is returned so that Amazon Cognito can start tracking this device.

• DEVICE_PASSWORD_VERIFIER: Similar to PASSWORD_VERIFIER, but for devices only.

• NEW_PASSWORD_REQUIRED: For users who are required to change their passwords after successful first login.

  Respond to this challenge with NEW_PASSWORD and any required attributes that Amazon Cognito returned in the requiredAttributes parameter. You can also set values for attributes that aren't required by your user pool and that your app client can write. For more information, see RespondToAuthChallenge.

  In a NEW_PASSWORD_REQUIRED challenge response, you can't modify a required attribute that already has a value. In RespondToAuthChallenge, set a value for any keys that Amazon Cognito returned in the requiredAttributes parameter, then use the UpdateUserAttributes API operation to modify the value of any additional attributes.

• MFA_SETUP: For users who are required to setup an MFA factor before they can sign in. The MFA types activated for the user pool will be listed in the challenge parameters MFAS_CAN_SETUP value.

  To set up software token MFA, use the session returned here from InitiateAuth as an input to AssociateSoftwareToken. Use the session returned by VerifySoftwareToken as an input to RespondToAuthChallenge with challenge name MFA_SETUP to complete sign-in. To set up SMS MFA, an administrator should help the user to add a phone number to their account, and then the user should call InitiateAuth again to restart sign-in.

pub fn session(self, input: impl Into<String>) -> Self

The session that should pass both ways in challenge-response calls to the service. If the caller must pass another challenge, they return a session with other challenge parameters. This session should be passed as it is to the next RespondToAuthChallenge API call.

pub fn set_session(self, input: Option<String>) -> Self

The session that should pass both ways in challenge-response calls to the service. If the caller must pass another challenge, they return a session with other challenge parameters. This session should be passed as it is to the next RespondToAuthChallenge API call.

pub fn get_session(&self) -> &Option<String>

The session that should pass both ways in challenge-response calls to the service. If the caller must pass another challenge, they return a session with other challenge parameters. This session should be passed as it is to the next RespondToAuthChallenge API call.

pub fn challenge_parameters( self, k: impl Into<String>, v: impl Into<String>, ) -> Self

Adds a key-value pair to challenge_parameters.

To override the contents of this collection use set_challenge_parameters.

The challenge parameters. These are returned in the InitiateAuth response if you must pass another challenge. The responses in this parameter should be used to compute inputs to the next call (RespondToAuthChallenge).

All challenges require USERNAME and SECRET_HASH (if applicable).

pub fn set_challenge_parameters( self, input: Option<HashMap<String, String>>, ) -> Self

The challenge parameters. These are returned in the InitiateAuth response if you must pass another challenge. The responses in this parameter should be used to compute inputs to the next call (RespondToAuthChallenge).

All challenges require USERNAME and SECRET_HASH (if applicable).

pub fn get_challenge_parameters(&self) -> &Option<HashMap<String, String>>

The challenge parameters. These are returned in the InitiateAuth response if you must pass another challenge. The responses in this parameter should be used to compute inputs to the next call (RespondToAuthChallenge).

All challenges require USERNAME and SECRET_HASH (if applicable).

pub fn authentication_result(self, input: AuthenticationResultType) -> Self

The result of the authentication response. This result is only returned if the caller doesn't need to pass another challenge. If the caller does need to pass another challenge before it gets tokens, ChallengeName, ChallengeParameters, and Session are returned.

pub fn set_authentication_result( self, input: Option<AuthenticationResultType>, ) -> Self

The result of the authentication response. This result is only returned if the caller doesn't need to pass another challenge. If the caller does need to pass another challenge before it gets tokens, ChallengeName, ChallengeParameters, and Session are returned.

pub fn get_authentication_result(&self) -> &Option<AuthenticationResultType>

The result of the authentication response. This result is only returned if the caller doesn't need to pass another challenge. If the caller does need to pass another challenge before it gets tokens, ChallengeName, ChallengeParameters, and Session are returned.

pub fn build(self) -> InitiateAuthOutput

Consumes the builder and constructs a InitiateAuthOutput.

Trait Implementations

impl Clone for InitiateAuthOutputBuilder

fn clone(&self) -> InitiateAuthOutputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for InitiateAuthOutputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for InitiateAuthOutputBuilder

fn default() -> InitiateAuthOutputBuilder

Returns the “default value” for a type.

impl PartialEq for InitiateAuthOutputBuilder

fn eq(&self, other: &InitiateAuthOutputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for InitiateAuthOutputBuilder