// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
/// Paginator for [`DescribeCodeCoverages`](crate::operation::DescribeCodeCoverages)
pub struct DescribeCodeCoveragesPaginator {
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::describe_code_coverages_input::Builder,
stop_on_duplicate_token: bool,
}
impl DescribeCodeCoveragesPaginator {
/// Create a new paginator-wrapper
pub(crate) fn new(
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::describe_code_coverages_input::Builder,
) -> Self {
Self {
handle,
builder,
stop_on_duplicate_token: true,
}
}
/// Set the page size
///
/// _Note: this method will override any previously set value for `max_results`_
pub fn page_size(mut self, limit: i32) -> Self {
self.builder.max_results = Some(limit);
self
}
/// Create a flattened paginator
///
/// This paginator automatically flattens results using `code_coverages`. Queries to the underlying service
/// are dispatched lazily.
pub fn items(self) -> crate::paginator::DescribeCodeCoveragesPaginatorItems {
crate::paginator::DescribeCodeCoveragesPaginatorItems(self)
}
/// Stop paginating when the service returns the same pagination token twice in a row.
///
/// Defaults to true.
///
/// For certain operations, it may be useful to continue on duplicate token. For example,
/// if an operation is for tailing a log file in real-time, then continuing may be desired.
/// This option can be set to `false` to accommodate these use cases.
pub fn stop_on_duplicate_token(mut self, stop_on_duplicate_token: bool) -> Self {
self.stop_on_duplicate_token = stop_on_duplicate_token;
self
}
/// Create the pagination stream
///
/// _Note:_ No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next)).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::DescribeCodeCoveragesOutput,
aws_smithy_http::result::SdkError<crate::error::DescribeCodeCoveragesError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_describe_code_coverages_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
}
/// Paginator for [`DescribeTestCases`](crate::operation::DescribeTestCases)
pub struct DescribeTestCasesPaginator {
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::describe_test_cases_input::Builder,
stop_on_duplicate_token: bool,
}
impl DescribeTestCasesPaginator {
/// Create a new paginator-wrapper
pub(crate) fn new(
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::describe_test_cases_input::Builder,
) -> Self {
Self {
handle,
builder,
stop_on_duplicate_token: true,
}
}
/// Set the page size
///
/// _Note: this method will override any previously set value for `max_results`_
pub fn page_size(mut self, limit: i32) -> Self {
self.builder.max_results = Some(limit);
self
}
/// Create a flattened paginator
///
/// This paginator automatically flattens results using `test_cases`. Queries to the underlying service
/// are dispatched lazily.
pub fn items(self) -> crate::paginator::DescribeTestCasesPaginatorItems {
crate::paginator::DescribeTestCasesPaginatorItems(self)
}
/// Stop paginating when the service returns the same pagination token twice in a row.
///
/// Defaults to true.
///
/// For certain operations, it may be useful to continue on duplicate token. For example,
/// if an operation is for tailing a log file in real-time, then continuing may be desired.
/// This option can be set to `false` to accommodate these use cases.
pub fn stop_on_duplicate_token(mut self, stop_on_duplicate_token: bool) -> Self {
self.stop_on_duplicate_token = stop_on_duplicate_token;
self
}
/// Create the pagination stream
///
/// _Note:_ No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next)).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::DescribeTestCasesOutput,
aws_smithy_http::result::SdkError<crate::error::DescribeTestCasesError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_describe_test_cases_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
}
/// Paginator for [`ListBuildBatches`](crate::operation::ListBuildBatches)
pub struct ListBuildBatchesPaginator {
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_build_batches_input::Builder,
stop_on_duplicate_token: bool,
}
impl ListBuildBatchesPaginator {
/// Create a new paginator-wrapper
pub(crate) fn new(
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_build_batches_input::Builder,
) -> Self {
Self {
handle,
builder,
stop_on_duplicate_token: true,
}
}
/// Set the page size
///
/// _Note: this method will override any previously set value for `max_results`_
pub fn page_size(mut self, limit: i32) -> Self {
self.builder.max_results = Some(limit);
self
}
/// Create a flattened paginator
///
/// This paginator automatically flattens results using `ids`. Queries to the underlying service
/// are dispatched lazily.
pub fn items(self) -> crate::paginator::ListBuildBatchesPaginatorItems {
crate::paginator::ListBuildBatchesPaginatorItems(self)
}
/// Stop paginating when the service returns the same pagination token twice in a row.
///
/// Defaults to true.
///
/// For certain operations, it may be useful to continue on duplicate token. For example,
/// if an operation is for tailing a log file in real-time, then continuing may be desired.
/// This option can be set to `false` to accommodate these use cases.
pub fn stop_on_duplicate_token(mut self, stop_on_duplicate_token: bool) -> Self {
self.stop_on_duplicate_token = stop_on_duplicate_token;
self
}
/// Create the pagination stream
///
/// _Note:_ No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next)).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::ListBuildBatchesOutput,
aws_smithy_http::result::SdkError<crate::error::ListBuildBatchesError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_list_build_batches_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
}
/// Paginator for [`ListBuildBatchesForProject`](crate::operation::ListBuildBatchesForProject)
pub struct ListBuildBatchesForProjectPaginator {
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_build_batches_for_project_input::Builder,
stop_on_duplicate_token: bool,
}
impl ListBuildBatchesForProjectPaginator {
/// Create a new paginator-wrapper
pub(crate) fn new(
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_build_batches_for_project_input::Builder,
) -> Self {
Self {
handle,
builder,
stop_on_duplicate_token: true,
}
}
/// Set the page size
///
/// _Note: this method will override any previously set value for `max_results`_
pub fn page_size(mut self, limit: i32) -> Self {
self.builder.max_results = Some(limit);
self
}
/// Create a flattened paginator
///
/// This paginator automatically flattens results using `ids`. Queries to the underlying service
/// are dispatched lazily.
pub fn items(self) -> crate::paginator::ListBuildBatchesForProjectPaginatorItems {
crate::paginator::ListBuildBatchesForProjectPaginatorItems(self)
}
/// Stop paginating when the service returns the same pagination token twice in a row.
///
/// Defaults to true.
///
/// For certain operations, it may be useful to continue on duplicate token. For example,
/// if an operation is for tailing a log file in real-time, then continuing may be desired.
/// This option can be set to `false` to accommodate these use cases.
pub fn stop_on_duplicate_token(mut self, stop_on_duplicate_token: bool) -> Self {
self.stop_on_duplicate_token = stop_on_duplicate_token;
self
}
/// Create the pagination stream
///
/// _Note:_ No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next)).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::ListBuildBatchesForProjectOutput,
aws_smithy_http::result::SdkError<crate::error::ListBuildBatchesForProjectError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_list_build_batches_for_project_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
}
/// Paginator for [`ListBuilds`](crate::operation::ListBuilds)
pub struct ListBuildsPaginator {
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_builds_input::Builder,
stop_on_duplicate_token: bool,
}
impl ListBuildsPaginator {
/// Create a new paginator-wrapper
pub(crate) fn new(
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_builds_input::Builder,
) -> Self {
Self {
handle,
builder,
stop_on_duplicate_token: true,
}
}
/// Create a flattened paginator
///
/// This paginator automatically flattens results using `ids`. Queries to the underlying service
/// are dispatched lazily.
pub fn items(self) -> crate::paginator::ListBuildsPaginatorItems {
crate::paginator::ListBuildsPaginatorItems(self)
}
/// Stop paginating when the service returns the same pagination token twice in a row.
///
/// Defaults to true.
///
/// For certain operations, it may be useful to continue on duplicate token. For example,
/// if an operation is for tailing a log file in real-time, then continuing may be desired.
/// This option can be set to `false` to accommodate these use cases.
pub fn stop_on_duplicate_token(mut self, stop_on_duplicate_token: bool) -> Self {
self.stop_on_duplicate_token = stop_on_duplicate_token;
self
}
/// Create the pagination stream
///
/// _Note:_ No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next)).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::ListBuildsOutput,
aws_smithy_http::result::SdkError<crate::error::ListBuildsError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_list_builds_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
}
/// Paginator for [`ListBuildsForProject`](crate::operation::ListBuildsForProject)
pub struct ListBuildsForProjectPaginator {
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_builds_for_project_input::Builder,
stop_on_duplicate_token: bool,
}
impl ListBuildsForProjectPaginator {
/// Create a new paginator-wrapper
pub(crate) fn new(
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_builds_for_project_input::Builder,
) -> Self {
Self {
handle,
builder,
stop_on_duplicate_token: true,
}
}
/// Create a flattened paginator
///
/// This paginator automatically flattens results using `ids`. Queries to the underlying service
/// are dispatched lazily.
pub fn items(self) -> crate::paginator::ListBuildsForProjectPaginatorItems {
crate::paginator::ListBuildsForProjectPaginatorItems(self)
}
/// Stop paginating when the service returns the same pagination token twice in a row.
///
/// Defaults to true.
///
/// For certain operations, it may be useful to continue on duplicate token. For example,
/// if an operation is for tailing a log file in real-time, then continuing may be desired.
/// This option can be set to `false` to accommodate these use cases.
pub fn stop_on_duplicate_token(mut self, stop_on_duplicate_token: bool) -> Self {
self.stop_on_duplicate_token = stop_on_duplicate_token;
self
}
/// Create the pagination stream
///
/// _Note:_ No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next)).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::ListBuildsForProjectOutput,
aws_smithy_http::result::SdkError<crate::error::ListBuildsForProjectError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_list_builds_for_project_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
}
/// Paginator for [`ListProjects`](crate::operation::ListProjects)
pub struct ListProjectsPaginator {
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_projects_input::Builder,
stop_on_duplicate_token: bool,
}
impl ListProjectsPaginator {
/// Create a new paginator-wrapper
pub(crate) fn new(
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_projects_input::Builder,
) -> Self {
Self {
handle,
builder,
stop_on_duplicate_token: true,
}
}
/// Create a flattened paginator
///
/// This paginator automatically flattens results using `projects`. Queries to the underlying service
/// are dispatched lazily.
pub fn items(self) -> crate::paginator::ListProjectsPaginatorItems {
crate::paginator::ListProjectsPaginatorItems(self)
}
/// Stop paginating when the service returns the same pagination token twice in a row.
///
/// Defaults to true.
///
/// For certain operations, it may be useful to continue on duplicate token. For example,
/// if an operation is for tailing a log file in real-time, then continuing may be desired.
/// This option can be set to `false` to accommodate these use cases.
pub fn stop_on_duplicate_token(mut self, stop_on_duplicate_token: bool) -> Self {
self.stop_on_duplicate_token = stop_on_duplicate_token;
self
}
/// Create the pagination stream
///
/// _Note:_ No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next)).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::ListProjectsOutput,
aws_smithy_http::result::SdkError<crate::error::ListProjectsError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_list_projects_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
}
/// Paginator for [`ListReportGroups`](crate::operation::ListReportGroups)
pub struct ListReportGroupsPaginator {
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_report_groups_input::Builder,
stop_on_duplicate_token: bool,
}
impl ListReportGroupsPaginator {
/// Create a new paginator-wrapper
pub(crate) fn new(
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_report_groups_input::Builder,
) -> Self {
Self {
handle,
builder,
stop_on_duplicate_token: true,
}
}
/// Set the page size
///
/// _Note: this method will override any previously set value for `max_results`_
pub fn page_size(mut self, limit: i32) -> Self {
self.builder.max_results = Some(limit);
self
}
/// Create a flattened paginator
///
/// This paginator automatically flattens results using `report_groups`. Queries to the underlying service
/// are dispatched lazily.
pub fn items(self) -> crate::paginator::ListReportGroupsPaginatorItems {
crate::paginator::ListReportGroupsPaginatorItems(self)
}
/// Stop paginating when the service returns the same pagination token twice in a row.
///
/// Defaults to true.
///
/// For certain operations, it may be useful to continue on duplicate token. For example,
/// if an operation is for tailing a log file in real-time, then continuing may be desired.
/// This option can be set to `false` to accommodate these use cases.
pub fn stop_on_duplicate_token(mut self, stop_on_duplicate_token: bool) -> Self {
self.stop_on_duplicate_token = stop_on_duplicate_token;
self
}
/// Create the pagination stream
///
/// _Note:_ No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next)).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::ListReportGroupsOutput,
aws_smithy_http::result::SdkError<crate::error::ListReportGroupsError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_list_report_groups_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
}
/// Paginator for [`ListReports`](crate::operation::ListReports)
pub struct ListReportsPaginator {
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_reports_input::Builder,
stop_on_duplicate_token: bool,
}
impl ListReportsPaginator {
/// Create a new paginator-wrapper
pub(crate) fn new(
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_reports_input::Builder,
) -> Self {
Self {
handle,
builder,
stop_on_duplicate_token: true,
}
}
/// Set the page size
///
/// _Note: this method will override any previously set value for `max_results`_
pub fn page_size(mut self, limit: i32) -> Self {
self.builder.max_results = Some(limit);
self
}
/// Create a flattened paginator
///
/// This paginator automatically flattens results using `reports`. Queries to the underlying service
/// are dispatched lazily.
pub fn items(self) -> crate::paginator::ListReportsPaginatorItems {
crate::paginator::ListReportsPaginatorItems(self)
}
/// Stop paginating when the service returns the same pagination token twice in a row.
///
/// Defaults to true.
///
/// For certain operations, it may be useful to continue on duplicate token. For example,
/// if an operation is for tailing a log file in real-time, then continuing may be desired.
/// This option can be set to `false` to accommodate these use cases.
pub fn stop_on_duplicate_token(mut self, stop_on_duplicate_token: bool) -> Self {
self.stop_on_duplicate_token = stop_on_duplicate_token;
self
}
/// Create the pagination stream
///
/// _Note:_ No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next)).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::ListReportsOutput,
aws_smithy_http::result::SdkError<crate::error::ListReportsError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_list_reports_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
}
/// Paginator for [`ListReportsForReportGroup`](crate::operation::ListReportsForReportGroup)
pub struct ListReportsForReportGroupPaginator {
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_reports_for_report_group_input::Builder,
stop_on_duplicate_token: bool,
}
impl ListReportsForReportGroupPaginator {
/// Create a new paginator-wrapper
pub(crate) fn new(
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_reports_for_report_group_input::Builder,
) -> Self {
Self {
handle,
builder,
stop_on_duplicate_token: true,
}
}
/// Set the page size
///
/// _Note: this method will override any previously set value for `max_results`_
pub fn page_size(mut self, limit: i32) -> Self {
self.builder.max_results = Some(limit);
self
}
/// Create a flattened paginator
///
/// This paginator automatically flattens results using `reports`. Queries to the underlying service
/// are dispatched lazily.
pub fn items(self) -> crate::paginator::ListReportsForReportGroupPaginatorItems {
crate::paginator::ListReportsForReportGroupPaginatorItems(self)
}
/// Stop paginating when the service returns the same pagination token twice in a row.
///
/// Defaults to true.
///
/// For certain operations, it may be useful to continue on duplicate token. For example,
/// if an operation is for tailing a log file in real-time, then continuing may be desired.
/// This option can be set to `false` to accommodate these use cases.
pub fn stop_on_duplicate_token(mut self, stop_on_duplicate_token: bool) -> Self {
self.stop_on_duplicate_token = stop_on_duplicate_token;
self
}
/// Create the pagination stream
///
/// _Note:_ No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next)).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::ListReportsForReportGroupOutput,
aws_smithy_http::result::SdkError<crate::error::ListReportsForReportGroupError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_list_reports_for_report_group_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
}
/// Paginator for [`ListSharedProjects`](crate::operation::ListSharedProjects)
pub struct ListSharedProjectsPaginator {
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_shared_projects_input::Builder,
stop_on_duplicate_token: bool,
}
impl ListSharedProjectsPaginator {
/// Create a new paginator-wrapper
pub(crate) fn new(
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_shared_projects_input::Builder,
) -> Self {
Self {
handle,
builder,
stop_on_duplicate_token: true,
}
}
/// Set the page size
///
/// _Note: this method will override any previously set value for `max_results`_
pub fn page_size(mut self, limit: i32) -> Self {
self.builder.max_results = Some(limit);
self
}
/// Create a flattened paginator
///
/// This paginator automatically flattens results using `projects`. Queries to the underlying service
/// are dispatched lazily.
pub fn items(self) -> crate::paginator::ListSharedProjectsPaginatorItems {
crate::paginator::ListSharedProjectsPaginatorItems(self)
}
/// Stop paginating when the service returns the same pagination token twice in a row.
///
/// Defaults to true.
///
/// For certain operations, it may be useful to continue on duplicate token. For example,
/// if an operation is for tailing a log file in real-time, then continuing may be desired.
/// This option can be set to `false` to accommodate these use cases.
pub fn stop_on_duplicate_token(mut self, stop_on_duplicate_token: bool) -> Self {
self.stop_on_duplicate_token = stop_on_duplicate_token;
self
}
/// Create the pagination stream
///
/// _Note:_ No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next)).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::ListSharedProjectsOutput,
aws_smithy_http::result::SdkError<crate::error::ListSharedProjectsError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_list_shared_projects_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
}
/// Paginator for [`ListSharedReportGroups`](crate::operation::ListSharedReportGroups)
pub struct ListSharedReportGroupsPaginator {
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_shared_report_groups_input::Builder,
stop_on_duplicate_token: bool,
}
impl ListSharedReportGroupsPaginator {
/// Create a new paginator-wrapper
pub(crate) fn new(
handle: std::sync::Arc<crate::client::Handle>,
builder: crate::input::list_shared_report_groups_input::Builder,
) -> Self {
Self {
handle,
builder,
stop_on_duplicate_token: true,
}
}
/// Set the page size
///
/// _Note: this method will override any previously set value for `max_results`_
pub fn page_size(mut self, limit: i32) -> Self {
self.builder.max_results = Some(limit);
self
}
/// Create a flattened paginator
///
/// This paginator automatically flattens results using `report_groups`. Queries to the underlying service
/// are dispatched lazily.
pub fn items(self) -> crate::paginator::ListSharedReportGroupsPaginatorItems {
crate::paginator::ListSharedReportGroupsPaginatorItems(self)
}
/// Stop paginating when the service returns the same pagination token twice in a row.
///
/// Defaults to true.
///
/// For certain operations, it may be useful to continue on duplicate token. For example,
/// if an operation is for tailing a log file in real-time, then continuing may be desired.
/// This option can be set to `false` to accommodate these use cases.
pub fn stop_on_duplicate_token(mut self, stop_on_duplicate_token: bool) -> Self {
self.stop_on_duplicate_token = stop_on_duplicate_token;
self
}
/// Create the pagination stream
///
/// _Note:_ No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next)).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::output::ListSharedReportGroupsOutput,
aws_smithy_http::result::SdkError<crate::error::ListSharedReportGroupsError>,
>,
> + Unpin {
// Move individual fields out of self for the borrow checker
let builder = self.builder;
let handle = self.handle;
aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
Box::pin(async move {
// Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
let mut input = match builder
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(input) => input,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
loop {
let op = match input
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)
{
Ok(op) => op,
Err(e) => {
let _ = tx.send(Err(e)).await;
return;
}
};
let resp = handle.client.call(op).await;
// If the input member is None or it was an error
let done = match resp {
Ok(ref resp) => {
let new_token = crate::lens::reflens_structure_crate_output_list_shared_report_groups_output_next_token(resp);
let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
if !is_empty
&& new_token == input.next_token.as_ref()
&& self.stop_on_duplicate_token
{
true
} else {
input.next_token = new_token.cloned();
is_empty
}
}
Err(_) => true,
};
if tx.send(resp).await.is_err() {
// receiving end was dropped
return;
}
if done {
return;
}
}
})
})
}
}
/// Flattened paginator for `DescribeCodeCoveragesPaginator`
///
/// This is created with [`.items()`](DescribeCodeCoveragesPaginator::items)
pub struct DescribeCodeCoveragesPaginatorItems(DescribeCodeCoveragesPaginator);
impl DescribeCodeCoveragesPaginatorItems {
/// Create the pagination stream
///
/// _Note: No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next))._
///
/// To read the entirety of the paginator, use [`.collect::<Result<Vec<_>, _>()`](tokio_stream::StreamExt::collect).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::model::CodeCoverage,
aws_smithy_http::result::SdkError<crate::error::DescribeCodeCoveragesError>,
>,
> + Unpin {
aws_smithy_async::future::fn_stream::TryFlatMap::new(self.0.send()).flat_map(|page| {
crate::lens::lens_structure_crate_output_describe_code_coverages_output_code_coverages(
page,
)
.unwrap_or_default()
.into_iter()
})
}
}
/// Flattened paginator for `DescribeTestCasesPaginator`
///
/// This is created with [`.items()`](DescribeTestCasesPaginator::items)
pub struct DescribeTestCasesPaginatorItems(DescribeTestCasesPaginator);
impl DescribeTestCasesPaginatorItems {
/// Create the pagination stream
///
/// _Note: No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next))._
///
/// To read the entirety of the paginator, use [`.collect::<Result<Vec<_>, _>()`](tokio_stream::StreamExt::collect).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
crate::model::TestCase,
aws_smithy_http::result::SdkError<crate::error::DescribeTestCasesError>,
>,
> + Unpin {
aws_smithy_async::future::fn_stream::TryFlatMap::new(self.0.send()).flat_map(|page| {
crate::lens::lens_structure_crate_output_describe_test_cases_output_test_cases(page)
.unwrap_or_default()
.into_iter()
})
}
}
/// Flattened paginator for `ListBuildBatchesPaginator`
///
/// This is created with [`.items()`](ListBuildBatchesPaginator::items)
pub struct ListBuildBatchesPaginatorItems(ListBuildBatchesPaginator);
impl ListBuildBatchesPaginatorItems {
/// Create the pagination stream
///
/// _Note: No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next))._
///
/// To read the entirety of the paginator, use [`.collect::<Result<Vec<_>, _>()`](tokio_stream::StreamExt::collect).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
std::string::String,
aws_smithy_http::result::SdkError<crate::error::ListBuildBatchesError>,
>,
> + Unpin {
aws_smithy_async::future::fn_stream::TryFlatMap::new(self.0.send()).flat_map(|page| {
crate::lens::lens_structure_crate_output_list_build_batches_output_ids(page)
.unwrap_or_default()
.into_iter()
})
}
}
/// Flattened paginator for `ListBuildBatchesForProjectPaginator`
///
/// This is created with [`.items()`](ListBuildBatchesForProjectPaginator::items)
pub struct ListBuildBatchesForProjectPaginatorItems(ListBuildBatchesForProjectPaginator);
impl ListBuildBatchesForProjectPaginatorItems {
/// Create the pagination stream
///
/// _Note: No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next))._
///
/// To read the entirety of the paginator, use [`.collect::<Result<Vec<_>, _>()`](tokio_stream::StreamExt::collect).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
std::string::String,
aws_smithy_http::result::SdkError<crate::error::ListBuildBatchesForProjectError>,
>,
> + Unpin {
aws_smithy_async::future::fn_stream::TryFlatMap::new(self.0.send()).flat_map(|page| {
crate::lens::lens_structure_crate_output_list_build_batches_for_project_output_ids(page)
.unwrap_or_default()
.into_iter()
})
}
}
/// Flattened paginator for `ListBuildsPaginator`
///
/// This is created with [`.items()`](ListBuildsPaginator::items)
pub struct ListBuildsPaginatorItems(ListBuildsPaginator);
impl ListBuildsPaginatorItems {
/// Create the pagination stream
///
/// _Note: No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next))._
///
/// To read the entirety of the paginator, use [`.collect::<Result<Vec<_>, _>()`](tokio_stream::StreamExt::collect).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
std::string::String,
aws_smithy_http::result::SdkError<crate::error::ListBuildsError>,
>,
> + Unpin {
aws_smithy_async::future::fn_stream::TryFlatMap::new(self.0.send()).flat_map(|page| {
crate::lens::lens_structure_crate_output_list_builds_output_ids(page)
.unwrap_or_default()
.into_iter()
})
}
}
/// Flattened paginator for `ListBuildsForProjectPaginator`
///
/// This is created with [`.items()`](ListBuildsForProjectPaginator::items)
pub struct ListBuildsForProjectPaginatorItems(ListBuildsForProjectPaginator);
impl ListBuildsForProjectPaginatorItems {
/// Create the pagination stream
///
/// _Note: No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next))._
///
/// To read the entirety of the paginator, use [`.collect::<Result<Vec<_>, _>()`](tokio_stream::StreamExt::collect).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
std::string::String,
aws_smithy_http::result::SdkError<crate::error::ListBuildsForProjectError>,
>,
> + Unpin {
aws_smithy_async::future::fn_stream::TryFlatMap::new(self.0.send()).flat_map(|page| {
crate::lens::lens_structure_crate_output_list_builds_for_project_output_ids(page)
.unwrap_or_default()
.into_iter()
})
}
}
/// Flattened paginator for `ListProjectsPaginator`
///
/// This is created with [`.items()`](ListProjectsPaginator::items)
pub struct ListProjectsPaginatorItems(ListProjectsPaginator);
impl ListProjectsPaginatorItems {
/// Create the pagination stream
///
/// _Note: No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next))._
///
/// To read the entirety of the paginator, use [`.collect::<Result<Vec<_>, _>()`](tokio_stream::StreamExt::collect).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
std::string::String,
aws_smithy_http::result::SdkError<crate::error::ListProjectsError>,
>,
> + Unpin {
aws_smithy_async::future::fn_stream::TryFlatMap::new(self.0.send()).flat_map(|page| {
crate::lens::lens_structure_crate_output_list_projects_output_projects(page)
.unwrap_or_default()
.into_iter()
})
}
}
/// Flattened paginator for `ListReportGroupsPaginator`
///
/// This is created with [`.items()`](ListReportGroupsPaginator::items)
pub struct ListReportGroupsPaginatorItems(ListReportGroupsPaginator);
impl ListReportGroupsPaginatorItems {
/// Create the pagination stream
///
/// _Note: No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next))._
///
/// To read the entirety of the paginator, use [`.collect::<Result<Vec<_>, _>()`](tokio_stream::StreamExt::collect).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
std::string::String,
aws_smithy_http::result::SdkError<crate::error::ListReportGroupsError>,
>,
> + Unpin {
aws_smithy_async::future::fn_stream::TryFlatMap::new(self.0.send()).flat_map(|page| {
crate::lens::lens_structure_crate_output_list_report_groups_output_report_groups(page)
.unwrap_or_default()
.into_iter()
})
}
}
/// Flattened paginator for `ListReportsPaginator`
///
/// This is created with [`.items()`](ListReportsPaginator::items)
pub struct ListReportsPaginatorItems(ListReportsPaginator);
impl ListReportsPaginatorItems {
/// Create the pagination stream
///
/// _Note: No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next))._
///
/// To read the entirety of the paginator, use [`.collect::<Result<Vec<_>, _>()`](tokio_stream::StreamExt::collect).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
std::string::String,
aws_smithy_http::result::SdkError<crate::error::ListReportsError>,
>,
> + Unpin {
aws_smithy_async::future::fn_stream::TryFlatMap::new(self.0.send()).flat_map(|page| {
crate::lens::lens_structure_crate_output_list_reports_output_reports(page)
.unwrap_or_default()
.into_iter()
})
}
}
/// Flattened paginator for `ListReportsForReportGroupPaginator`
///
/// This is created with [`.items()`](ListReportsForReportGroupPaginator::items)
pub struct ListReportsForReportGroupPaginatorItems(ListReportsForReportGroupPaginator);
impl ListReportsForReportGroupPaginatorItems {
/// Create the pagination stream
///
/// _Note: No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next))._
///
/// To read the entirety of the paginator, use [`.collect::<Result<Vec<_>, _>()`](tokio_stream::StreamExt::collect).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
std::string::String,
aws_smithy_http::result::SdkError<crate::error::ListReportsForReportGroupError>,
>,
> + Unpin {
aws_smithy_async::future::fn_stream::TryFlatMap::new(self.0.send()).flat_map(|page| {
crate::lens::lens_structure_crate_output_list_reports_for_report_group_output_reports(
page,
)
.unwrap_or_default()
.into_iter()
})
}
}
/// Flattened paginator for `ListSharedProjectsPaginator`
///
/// This is created with [`.items()`](ListSharedProjectsPaginator::items)
pub struct ListSharedProjectsPaginatorItems(ListSharedProjectsPaginator);
impl ListSharedProjectsPaginatorItems {
/// Create the pagination stream
///
/// _Note: No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next))._
///
/// To read the entirety of the paginator, use [`.collect::<Result<Vec<_>, _>()`](tokio_stream::StreamExt::collect).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
std::string::String,
aws_smithy_http::result::SdkError<crate::error::ListSharedProjectsError>,
>,
> + Unpin {
aws_smithy_async::future::fn_stream::TryFlatMap::new(self.0.send()).flat_map(|page| {
crate::lens::lens_structure_crate_output_list_shared_projects_output_projects(page)
.unwrap_or_default()
.into_iter()
})
}
}
/// Flattened paginator for `ListSharedReportGroupsPaginator`
///
/// This is created with [`.items()`](ListSharedReportGroupsPaginator::items)
pub struct ListSharedReportGroupsPaginatorItems(ListSharedReportGroupsPaginator);
impl ListSharedReportGroupsPaginatorItems {
/// Create the pagination stream
///
/// _Note: No requests will be dispatched until the stream is used (eg. with [`.next().await`](tokio_stream::StreamExt::next))._
///
/// To read the entirety of the paginator, use [`.collect::<Result<Vec<_>, _>()`](tokio_stream::StreamExt::collect).
pub fn send(
self,
) -> impl tokio_stream::Stream<
Item = std::result::Result<
std::string::String,
aws_smithy_http::result::SdkError<crate::error::ListSharedReportGroupsError>,
>,
> + Unpin {
aws_smithy_async::future::fn_stream::TryFlatMap::new(self.0.send()).flat_map(|page| {
crate::lens::lens_structure_crate_output_list_shared_report_groups_output_report_groups(
page,
)
.unwrap_or_default()
.into_iter()
})
}
}