pub struct StartQueryFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to StartQuery
.
Schedules a query of a log group using CloudWatch Logs Insights. You specify the log group and time range to query and the query string to use.
For more information, see CloudWatch Logs Insights Query Syntax.
After you run a query using StartQuery
, the query results are stored by CloudWatch Logs. You can use GetQueryResults to retrieve the results of a query, using the queryId
that StartQuery
returns.
If you have associated a KMS key with the query results in this account, then StartQuery uses that key to encrypt the results when it stores them. If no key is associated with query results, the query results are encrypted with the default CloudWatch Logs encryption method.
Queries time out after 60 minutes of runtime. If your queries are timing out, reduce the time range being searched or partition your query into a number of queries.
If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account to start a query in a linked source account. For more information, see CloudWatch cross-account observability. For a cross-account StartQuery
operation, the query definition must be defined in the monitoring account.
You can have up to 30 concurrent CloudWatch Logs insights queries, including queries that have been added to dashboards.
Implementations§
source§impl StartQueryFluentBuilder
impl StartQueryFluentBuilder
sourcepub fn as_input(&self) -> &StartQueryInputBuilder
pub fn as_input(&self) -> &StartQueryInputBuilder
Access the StartQuery as a reference.
sourcepub async fn send(
self,
) -> Result<StartQueryOutput, SdkError<StartQueryError, HttpResponse>>
pub async fn send( self, ) -> Result<StartQueryOutput, SdkError<StartQueryError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn customize(
self,
) -> CustomizableOperation<StartQueryOutput, StartQueryError, Self>
pub fn customize( self, ) -> CustomizableOperation<StartQueryOutput, StartQueryError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
sourcepub fn log_group_name(self, input: impl Into<String>) -> Self
pub fn log_group_name(self, input: impl Into<String>) -> Self
The log group on which to perform the query.
A StartQuery
operation must include exactly one of the following parameters: logGroupName
, logGroupNames
, or logGroupIdentifiers
.
sourcepub fn set_log_group_name(self, input: Option<String>) -> Self
pub fn set_log_group_name(self, input: Option<String>) -> Self
The log group on which to perform the query.
A StartQuery
operation must include exactly one of the following parameters: logGroupName
, logGroupNames
, or logGroupIdentifiers
.
sourcepub fn get_log_group_name(&self) -> &Option<String>
pub fn get_log_group_name(&self) -> &Option<String>
The log group on which to perform the query.
A StartQuery
operation must include exactly one of the following parameters: logGroupName
, logGroupNames
, or logGroupIdentifiers
.
sourcepub fn log_group_names(self, input: impl Into<String>) -> Self
pub fn log_group_names(self, input: impl Into<String>) -> Self
Appends an item to logGroupNames
.
To override the contents of this collection use set_log_group_names
.
The list of log groups to be queried. You can include up to 50 log groups.
A StartQuery
operation must include exactly one of the following parameters: logGroupName
, logGroupNames
, or logGroupIdentifiers
.
sourcepub fn set_log_group_names(self, input: Option<Vec<String>>) -> Self
pub fn set_log_group_names(self, input: Option<Vec<String>>) -> Self
The list of log groups to be queried. You can include up to 50 log groups.
A StartQuery
operation must include exactly one of the following parameters: logGroupName
, logGroupNames
, or logGroupIdentifiers
.
sourcepub fn get_log_group_names(&self) -> &Option<Vec<String>>
pub fn get_log_group_names(&self) -> &Option<Vec<String>>
The list of log groups to be queried. You can include up to 50 log groups.
A StartQuery
operation must include exactly one of the following parameters: logGroupName
, logGroupNames
, or logGroupIdentifiers
.
sourcepub fn log_group_identifiers(self, input: impl Into<String>) -> Self
pub fn log_group_identifiers(self, input: impl Into<String>) -> Self
Appends an item to logGroupIdentifiers
.
To override the contents of this collection use set_log_group_identifiers
.
The list of log groups to query. You can include up to 50 log groups.
You can specify them by the log group name or ARN. If a log group that you're querying is in a source account and you're using a monitoring account, you must specify the ARN of the log group here. The query definition must also be defined in the monitoring account.
If you specify an ARN, the ARN can't end with an asterisk (*).
A StartQuery
operation must include exactly one of the following parameters: logGroupName
, logGroupNames
, or logGroupIdentifiers
.
sourcepub fn set_log_group_identifiers(self, input: Option<Vec<String>>) -> Self
pub fn set_log_group_identifiers(self, input: Option<Vec<String>>) -> Self
The list of log groups to query. You can include up to 50 log groups.
You can specify them by the log group name or ARN. If a log group that you're querying is in a source account and you're using a monitoring account, you must specify the ARN of the log group here. The query definition must also be defined in the monitoring account.
If you specify an ARN, the ARN can't end with an asterisk (*).
A StartQuery
operation must include exactly one of the following parameters: logGroupName
, logGroupNames
, or logGroupIdentifiers
.
sourcepub fn get_log_group_identifiers(&self) -> &Option<Vec<String>>
pub fn get_log_group_identifiers(&self) -> &Option<Vec<String>>
The list of log groups to query. You can include up to 50 log groups.
You can specify them by the log group name or ARN. If a log group that you're querying is in a source account and you're using a monitoring account, you must specify the ARN of the log group here. The query definition must also be defined in the monitoring account.
If you specify an ARN, the ARN can't end with an asterisk (*).
A StartQuery
operation must include exactly one of the following parameters: logGroupName
, logGroupNames
, or logGroupIdentifiers
.
sourcepub fn start_time(self, input: i64) -> Self
pub fn start_time(self, input: i64) -> Self
The beginning of the time range to query. The range is inclusive, so the specified start time is included in the query. Specified as epoch time, the number of seconds since January 1, 1970, 00:00:00 UTC
.
sourcepub fn set_start_time(self, input: Option<i64>) -> Self
pub fn set_start_time(self, input: Option<i64>) -> Self
The beginning of the time range to query. The range is inclusive, so the specified start time is included in the query. Specified as epoch time, the number of seconds since January 1, 1970, 00:00:00 UTC
.
sourcepub fn get_start_time(&self) -> &Option<i64>
pub fn get_start_time(&self) -> &Option<i64>
The beginning of the time range to query. The range is inclusive, so the specified start time is included in the query. Specified as epoch time, the number of seconds since January 1, 1970, 00:00:00 UTC
.
sourcepub fn end_time(self, input: i64) -> Self
pub fn end_time(self, input: i64) -> Self
The end of the time range to query. The range is inclusive, so the specified end time is included in the query. Specified as epoch time, the number of seconds since January 1, 1970, 00:00:00 UTC
.
sourcepub fn set_end_time(self, input: Option<i64>) -> Self
pub fn set_end_time(self, input: Option<i64>) -> Self
The end of the time range to query. The range is inclusive, so the specified end time is included in the query. Specified as epoch time, the number of seconds since January 1, 1970, 00:00:00 UTC
.
sourcepub fn get_end_time(&self) -> &Option<i64>
pub fn get_end_time(&self) -> &Option<i64>
The end of the time range to query. The range is inclusive, so the specified end time is included in the query. Specified as epoch time, the number of seconds since January 1, 1970, 00:00:00 UTC
.
sourcepub fn query_string(self, input: impl Into<String>) -> Self
pub fn query_string(self, input: impl Into<String>) -> Self
The query string to use. For more information, see CloudWatch Logs Insights Query Syntax.
sourcepub fn set_query_string(self, input: Option<String>) -> Self
pub fn set_query_string(self, input: Option<String>) -> Self
The query string to use. For more information, see CloudWatch Logs Insights Query Syntax.
sourcepub fn get_query_string(&self) -> &Option<String>
pub fn get_query_string(&self) -> &Option<String>
The query string to use. For more information, see CloudWatch Logs Insights Query Syntax.
sourcepub fn limit(self, input: i32) -> Self
pub fn limit(self, input: i32) -> Self
The maximum number of log events to return in the query. If the query string uses the fields
command, only the specified fields and their values are returned. The default is 1000.
Trait Implementations§
source§impl Clone for StartQueryFluentBuilder
impl Clone for StartQueryFluentBuilder
source§fn clone(&self) -> StartQueryFluentBuilder
fn clone(&self) -> StartQueryFluentBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreAuto Trait Implementations§
impl Freeze for StartQueryFluentBuilder
impl !RefUnwindSafe for StartQueryFluentBuilder
impl Send for StartQueryFluentBuilder
impl Sync for StartQueryFluentBuilder
impl Unpin for StartQueryFluentBuilder
impl !UnwindSafe for StartQueryFluentBuilder
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> IntoEither for T
impl<T> IntoEither for T
source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moresource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read more