Struct aws_sdk_cloudfront::model::viewer_certificate::Builder

#[non_exhaustive]
pub struct Builder { /* fields omitted */ }

A builder for ViewerCertificate

Implementations

impl Builder

pub fn cloud_front_default_certificate(self, input: bool) -> Self

If the distribution uses the CloudFront domain name such as d111111abcdef8.cloudfront.net, set this field to true.

If the distribution uses Aliases (alternate domain names or CNAMEs), set this field to false and specify values for the following fields:

• ACMCertificateArn or IAMCertificateId (specify a value for one, not both)

• MinimumProtocolVersion

• SSLSupportMethod

pub fn set_cloud_front_default_certificate(self, input: Option<bool>) -> Self

If the distribution uses the CloudFront domain name such as d111111abcdef8.cloudfront.net, set this field to true.

If the distribution uses Aliases (alternate domain names or CNAMEs), set this field to false and specify values for the following fields:

• ACMCertificateArn or IAMCertificateId (specify a value for one, not both)

• MinimumProtocolVersion

• SSLSupportMethod

pub fn iam_certificate_id(self, input: impl Into<String>) -> Self

If the distribution uses Aliases (alternate domain names or CNAMEs) and the SSL/TLS certificate is stored in Identity and Access Management (IAM), provide the ID of the IAM certificate.

If you specify an IAM certificate ID, you must also specify values for MinimumProtocolVersion and SSLSupportMethod.

pub fn set_iam_certificate_id(self, input: Option<String>) -> Self

If the distribution uses Aliases (alternate domain names or CNAMEs) and the SSL/TLS certificate is stored in Identity and Access Management (IAM), provide the ID of the IAM certificate.

If you specify an IAM certificate ID, you must also specify values for MinimumProtocolVersion and SSLSupportMethod.

pub fn acm_certificate_arn(self, input: impl Into<String>) -> Self

If the distribution uses Aliases (alternate domain names or CNAMEs) and the SSL/TLS certificate is stored in Certificate Manager (ACM), provide the Amazon Resource Name (ARN) of the ACM certificate. CloudFront only supports ACM certificates in the US East (N. Virginia) Region (us-east-1).

If you specify an ACM certificate ARN, you must also specify values for MinimumProtocolVersion and SSLSupportMethod.

pub fn set_acm_certificate_arn(self, input: Option<String>) -> Self

If the distribution uses Aliases (alternate domain names or CNAMEs) and the SSL/TLS certificate is stored in Certificate Manager (ACM), provide the Amazon Resource Name (ARN) of the ACM certificate. CloudFront only supports ACM certificates in the US East (N. Virginia) Region (us-east-1).

If you specify an ACM certificate ARN, you must also specify values for MinimumProtocolVersion and SSLSupportMethod.

pub fn ssl_support_method(self, input: SslSupportMethod) -> Self

If the distribution uses Aliases (alternate domain names or CNAMEs), specify which viewers the distribution accepts HTTPS connections from.

• sni-only – The distribution accepts HTTPS connections from only viewers that support server name indication (SNI). This is recommended. Most browsers and clients support SNI.

• vip – The distribution accepts HTTPS connections from all viewers including those that don’t support SNI. This is not recommended, and results in additional monthly charges from CloudFront.

• static-ip - Do not specify this value unless your distribution has been enabled for this feature by the CloudFront team. If you have a use case that requires static IP addresses for a distribution, contact CloudFront through the Amazon Web Services Support Center.

If the distribution uses the CloudFront domain name such as d111111abcdef8.cloudfront.net, don’t set a value for this field.

pub fn set_ssl_support_method(self, input: Option<SslSupportMethod>) -> Self

If the distribution uses Aliases (alternate domain names or CNAMEs), specify which viewers the distribution accepts HTTPS connections from.

• sni-only – The distribution accepts HTTPS connections from only viewers that support server name indication (SNI). This is recommended. Most browsers and clients support SNI.

• vip – The distribution accepts HTTPS connections from all viewers including those that don’t support SNI. This is not recommended, and results in additional monthly charges from CloudFront.

• static-ip - Do not specify this value unless your distribution has been enabled for this feature by the CloudFront team. If you have a use case that requires static IP addresses for a distribution, contact CloudFront through the Amazon Web Services Support Center.

If the distribution uses the CloudFront domain name such as d111111abcdef8.cloudfront.net, don’t set a value for this field.

pub fn minimum_protocol_version(self, input: MinimumProtocolVersion) -> Self

If the distribution uses Aliases (alternate domain names or CNAMEs), specify the security policy that you want CloudFront to use for HTTPS connections with viewers. The security policy determines two settings:

• The minimum SSL/TLS protocol that CloudFront can use to communicate with viewers.

• The ciphers that CloudFront can use to encrypt the content that it returns to viewers.

For more information, see Security Policy and Supported Protocols and Ciphers Between Viewers and CloudFront in the Amazon CloudFront Developer Guide.

On the CloudFront console, this setting is called Security Policy.

When you’re using SNI only (you set SSLSupportMethod to sni-only), you must specify TLSv1 or higher.

If the distribution uses the CloudFront domain name such as d111111abcdef8.cloudfront.net (you set CloudFrontDefaultCertificate to true), CloudFront automatically sets the security policy to TLSv1 regardless of the value that you set here.

pub fn set_minimum_protocol_version(
    self,
    input: Option<MinimumProtocolVersion>
) -> Self

If the distribution uses Aliases (alternate domain names or CNAMEs), specify the security policy that you want CloudFront to use for HTTPS connections with viewers. The security policy determines two settings:

• The minimum SSL/TLS protocol that CloudFront can use to communicate with viewers.

• The ciphers that CloudFront can use to encrypt the content that it returns to viewers.

For more information, see Security Policy and Supported Protocols and Ciphers Between Viewers and CloudFront in the Amazon CloudFront Developer Guide.

On the CloudFront console, this setting is called Security Policy.

When you’re using SNI only (you set SSLSupportMethod to sni-only), you must specify TLSv1 or higher.

If the distribution uses the CloudFront domain name such as d111111abcdef8.cloudfront.net (you set CloudFrontDefaultCertificate to true), CloudFront automatically sets the security policy to TLSv1 regardless of the value that you set here.

pub fn certificate(self, input: impl Into<String>) -> Self

This field is deprecated. Use one of the following fields instead:

• ACMCertificateArn

• IAMCertificateId

• CloudFrontDefaultCertificate

pub fn set_certificate(self, input: Option<String>) -> Self

This field is deprecated. Use one of the following fields instead:

• ACMCertificateArn

• IAMCertificateId

• CloudFrontDefaultCertificate

pub fn certificate_source(self, input: CertificateSource) -> Self

This field is deprecated. Use one of the following fields instead:

• ACMCertificateArn

• IAMCertificateId

• CloudFrontDefaultCertificate

pub fn set_certificate_source(self, input: Option<CertificateSource>) -> Self

This field is deprecated. Use one of the following fields instead:

• ACMCertificateArn

• IAMCertificateId

• CloudFrontDefaultCertificate

pub fn build(self) -> ViewerCertificate

Consumes the builder and constructs a ViewerCertificate

Trait Implementations

impl Clone for Builder

fn clone(&self) -> Builder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Builder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Builder

fn default() -> Builder

Returns the “default value” for a type.

impl PartialEq<Builder> for Builder

fn eq(&self, other: &Builder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Builder) -> bool

This method tests for !=.

impl StructuralPartialEq for Builder