// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
use std::fmt::Write;
/// See [`DeleteAlternateContactInput`](crate::input::DeleteAlternateContactInput).
pub mod delete_alternate_contact_input {
/// A builder for [`DeleteAlternateContactInput`](crate::input::DeleteAlternateContactInput).
#[derive(std::clone::Clone, std::cmp::PartialEq, std::default::Default, std::fmt::Debug)]
pub struct Builder {
pub(crate) alternate_contact_type: std::option::Option<crate::model::AlternateContactType>,
pub(crate) account_id: std::option::Option<std::string::String>,
}
impl Builder {
/// <p>Specifies which of the alternate contacts to delete. </p>
pub fn alternate_contact_type(mut self, input: crate::model::AlternateContactType) -> Self {
self.alternate_contact_type = Some(input);
self
}
/// <p>Specifies which of the alternate contacts to delete. </p>
pub fn set_alternate_contact_type(
mut self,
input: std::option::Option<crate::model::AlternateContactType>,
) -> Self {
self.alternate_contact_type = input;
self
}
/// <p>Specifies the 12 digit account ID number of the Amazon Web Services account that you want to access or modify with this operation.</p>
/// <p>If you do not specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation.</p>
/// <p>To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account, and the specified account ID must be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>; it must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, then don't specify this parameter, and call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn account_id(mut self, input: impl Into<std::string::String>) -> Self {
self.account_id = Some(input.into());
self
}
/// <p>Specifies the 12 digit account ID number of the Amazon Web Services account that you want to access or modify with this operation.</p>
/// <p>If you do not specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation.</p>
/// <p>To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account, and the specified account ID must be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>; it must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, then don't specify this parameter, and call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn set_account_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.account_id = input;
self
}
/// Consumes the builder and constructs a [`DeleteAlternateContactInput`](crate::input::DeleteAlternateContactInput).
pub fn build(
self,
) -> Result<
crate::input::DeleteAlternateContactInput,
aws_smithy_http::operation::error::BuildError,
> {
Ok(crate::input::DeleteAlternateContactInput {
alternate_contact_type: self.alternate_contact_type,
account_id: self.account_id,
})
}
}
}
impl DeleteAlternateContactInput {
/// Consumes the builder and constructs an Operation<[`DeleteAlternateContact`](crate::operation::DeleteAlternateContact)>
#[allow(unused_mut)]
#[allow(clippy::let_and_return)]
#[allow(clippy::needless_borrow)]
pub async fn make_operation(
&self,
_config: &crate::config::Config,
) -> std::result::Result<
aws_smithy_http::operation::Operation<
crate::operation::DeleteAlternateContact,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::operation::error::BuildError,
> {
let params_result = crate::endpoint::Params::builder()
.set_region(_config.region.as_ref().map(|r| r.as_ref().to_owned()))
.set_use_dual_stack(_config.use_dual_stack)
.set_use_fips(_config.use_fips)
.set_endpoint(_config.endpoint_url.clone())
.build()
.map_err(|err| {
aws_smithy_http::endpoint::ResolveEndpointError::from_source(
"could not construct endpoint parameters",
err,
)
});
let (endpoint_result, params) = match params_result {
Ok(params) => (
_config.endpoint_resolver.resolve_endpoint(¶ms),
Some(params),
),
Err(e) => (Err(e), None),
};
let mut request = {
fn uri_base(
_input: &crate::input::DeleteAlternateContactInput,
output: &mut String,
) -> Result<(), aws_smithy_http::operation::error::BuildError> {
write!(output, "/deleteAlternateContact").expect("formatting should succeed");
Ok(())
}
#[allow(clippy::unnecessary_wraps)]
fn update_http_builder(
input: &crate::input::DeleteAlternateContactInput,
builder: http::request::Builder,
) -> std::result::Result<
http::request::Builder,
aws_smithy_http::operation::error::BuildError,
> {
let mut uri = String::new();
uri_base(input, &mut uri)?;
Ok(builder.method("POST").uri(uri))
}
let mut builder = update_http_builder(&self, http::request::Builder::new())?;
builder = aws_smithy_http::header::set_request_header_if_absent(
builder,
http::header::CONTENT_TYPE,
"application/json",
);
builder
};
let mut properties = aws_smithy_http::property_bag::SharedPropertyBag::new();
#[allow(clippy::useless_conversion)]
let body = aws_smithy_http::body::SdkBody::from(
crate::operation_ser::serialize_operation_crate_operation_delete_alternate_contact(
&self,
)?,
);
if let Some(content_length) = body.content_length() {
request = aws_smithy_http::header::set_request_header_if_absent(
request,
http::header::CONTENT_LENGTH,
content_length,
);
}
let request = request.body(body).expect("should be valid request");
let mut request = aws_smithy_http::operation::Request::from_parts(request, properties);
request.properties_mut().insert(endpoint_result);
if let Some(params) = params {
request.properties_mut().insert(params);
}
request
.properties_mut()
.insert(aws_smithy_http::http_versions::DEFAULT_HTTP_VERSION_LIST.clone());
let mut user_agent = aws_http::user_agent::AwsUserAgent::new_from_environment(
aws_types::os_shim_internal::Env::real(),
crate::API_METADATA.clone(),
);
if let Some(app_name) = _config.app_name() {
user_agent = user_agent.with_app_name(app_name.clone());
}
request.properties_mut().insert(user_agent);
let mut signing_config = aws_sig_auth::signer::OperationSigningConfig::default_config();
request.properties_mut().insert(signing_config);
request
.properties_mut()
.insert(aws_types::SigningService::from_static(
_config.signing_service(),
));
if let Some(region) = &_config.region {
request
.properties_mut()
.insert(aws_types::region::SigningRegion::from(region.clone()));
}
if let Some(region) = &_config.region {
request.properties_mut().insert(region.clone());
}
aws_http::auth::set_credentials_cache(
&mut request.properties_mut(),
_config.credentials_cache.clone(),
);
let op = aws_smithy_http::operation::Operation::new(
request,
crate::operation::DeleteAlternateContact::new(),
)
.with_metadata(aws_smithy_http::operation::Metadata::new(
"DeleteAlternateContact",
"account",
));
let op = op.with_retry_classifier(aws_http::retry::AwsResponseRetryClassifier::new());
Ok(op)
}
/// Creates a new builder-style object to manufacture [`DeleteAlternateContactInput`](crate::input::DeleteAlternateContactInput).
pub fn builder() -> crate::input::delete_alternate_contact_input::Builder {
crate::input::delete_alternate_contact_input::Builder::default()
}
}
/// See [`GetAlternateContactInput`](crate::input::GetAlternateContactInput).
pub mod get_alternate_contact_input {
/// A builder for [`GetAlternateContactInput`](crate::input::GetAlternateContactInput).
#[derive(std::clone::Clone, std::cmp::PartialEq, std::default::Default, std::fmt::Debug)]
pub struct Builder {
pub(crate) alternate_contact_type: std::option::Option<crate::model::AlternateContactType>,
pub(crate) account_id: std::option::Option<std::string::String>,
}
impl Builder {
/// <p>Specifies which alternate contact you want to retrieve.</p>
pub fn alternate_contact_type(mut self, input: crate::model::AlternateContactType) -> Self {
self.alternate_contact_type = Some(input);
self
}
/// <p>Specifies which alternate contact you want to retrieve.</p>
pub fn set_alternate_contact_type(
mut self,
input: std::option::Option<crate::model::AlternateContactType>,
) -> Self {
self.alternate_contact_type = input;
self
}
/// <p>Specifies the 12 digit account ID number of the Amazon Web Services account that you want to access or modify with this operation.</p>
/// <p>If you do not specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation.</p>
/// <p>To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account, and the specified account ID must be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>; it must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, then don't specify this parameter, and call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn account_id(mut self, input: impl Into<std::string::String>) -> Self {
self.account_id = Some(input.into());
self
}
/// <p>Specifies the 12 digit account ID number of the Amazon Web Services account that you want to access or modify with this operation.</p>
/// <p>If you do not specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation.</p>
/// <p>To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account, and the specified account ID must be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>; it must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, then don't specify this parameter, and call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn set_account_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.account_id = input;
self
}
/// Consumes the builder and constructs a [`GetAlternateContactInput`](crate::input::GetAlternateContactInput).
pub fn build(
self,
) -> Result<
crate::input::GetAlternateContactInput,
aws_smithy_http::operation::error::BuildError,
> {
Ok(crate::input::GetAlternateContactInput {
alternate_contact_type: self.alternate_contact_type,
account_id: self.account_id,
})
}
}
}
impl GetAlternateContactInput {
/// Consumes the builder and constructs an Operation<[`GetAlternateContact`](crate::operation::GetAlternateContact)>
#[allow(unused_mut)]
#[allow(clippy::let_and_return)]
#[allow(clippy::needless_borrow)]
pub async fn make_operation(
&self,
_config: &crate::config::Config,
) -> std::result::Result<
aws_smithy_http::operation::Operation<
crate::operation::GetAlternateContact,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::operation::error::BuildError,
> {
let params_result = crate::endpoint::Params::builder()
.set_region(_config.region.as_ref().map(|r| r.as_ref().to_owned()))
.set_use_dual_stack(_config.use_dual_stack)
.set_use_fips(_config.use_fips)
.set_endpoint(_config.endpoint_url.clone())
.build()
.map_err(|err| {
aws_smithy_http::endpoint::ResolveEndpointError::from_source(
"could not construct endpoint parameters",
err,
)
});
let (endpoint_result, params) = match params_result {
Ok(params) => (
_config.endpoint_resolver.resolve_endpoint(¶ms),
Some(params),
),
Err(e) => (Err(e), None),
};
let mut request = {
fn uri_base(
_input: &crate::input::GetAlternateContactInput,
output: &mut String,
) -> Result<(), aws_smithy_http::operation::error::BuildError> {
write!(output, "/getAlternateContact").expect("formatting should succeed");
Ok(())
}
#[allow(clippy::unnecessary_wraps)]
fn update_http_builder(
input: &crate::input::GetAlternateContactInput,
builder: http::request::Builder,
) -> std::result::Result<
http::request::Builder,
aws_smithy_http::operation::error::BuildError,
> {
let mut uri = String::new();
uri_base(input, &mut uri)?;
Ok(builder.method("POST").uri(uri))
}
let mut builder = update_http_builder(&self, http::request::Builder::new())?;
builder = aws_smithy_http::header::set_request_header_if_absent(
builder,
http::header::CONTENT_TYPE,
"application/json",
);
builder
};
let mut properties = aws_smithy_http::property_bag::SharedPropertyBag::new();
#[allow(clippy::useless_conversion)]
let body = aws_smithy_http::body::SdkBody::from(
crate::operation_ser::serialize_operation_crate_operation_get_alternate_contact(&self)?,
);
if let Some(content_length) = body.content_length() {
request = aws_smithy_http::header::set_request_header_if_absent(
request,
http::header::CONTENT_LENGTH,
content_length,
);
}
let request = request.body(body).expect("should be valid request");
let mut request = aws_smithy_http::operation::Request::from_parts(request, properties);
request.properties_mut().insert(endpoint_result);
if let Some(params) = params {
request.properties_mut().insert(params);
}
request
.properties_mut()
.insert(aws_smithy_http::http_versions::DEFAULT_HTTP_VERSION_LIST.clone());
let mut user_agent = aws_http::user_agent::AwsUserAgent::new_from_environment(
aws_types::os_shim_internal::Env::real(),
crate::API_METADATA.clone(),
);
if let Some(app_name) = _config.app_name() {
user_agent = user_agent.with_app_name(app_name.clone());
}
request.properties_mut().insert(user_agent);
let mut signing_config = aws_sig_auth::signer::OperationSigningConfig::default_config();
request.properties_mut().insert(signing_config);
request
.properties_mut()
.insert(aws_types::SigningService::from_static(
_config.signing_service(),
));
if let Some(region) = &_config.region {
request
.properties_mut()
.insert(aws_types::region::SigningRegion::from(region.clone()));
}
if let Some(region) = &_config.region {
request.properties_mut().insert(region.clone());
}
aws_http::auth::set_credentials_cache(
&mut request.properties_mut(),
_config.credentials_cache.clone(),
);
let op = aws_smithy_http::operation::Operation::new(
request,
crate::operation::GetAlternateContact::new(),
)
.with_metadata(aws_smithy_http::operation::Metadata::new(
"GetAlternateContact",
"account",
));
let op = op.with_retry_classifier(aws_http::retry::AwsResponseRetryClassifier::new());
Ok(op)
}
/// Creates a new builder-style object to manufacture [`GetAlternateContactInput`](crate::input::GetAlternateContactInput).
pub fn builder() -> crate::input::get_alternate_contact_input::Builder {
crate::input::get_alternate_contact_input::Builder::default()
}
}
/// See [`GetContactInformationInput`](crate::input::GetContactInformationInput).
pub mod get_contact_information_input {
/// A builder for [`GetContactInformationInput`](crate::input::GetContactInformationInput).
#[derive(std::clone::Clone, std::cmp::PartialEq, std::default::Default, std::fmt::Debug)]
pub struct Builder {
pub(crate) account_id: std::option::Option<std::string::String>,
}
impl Builder {
/// <p>Specifies the 12-digit account ID number of the Amazon Web Services account that you want to access or modify with this operation. If you don't specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation. To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account. The specified account ID must also be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>. It must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, don't specify this parameter. Instead, call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn account_id(mut self, input: impl Into<std::string::String>) -> Self {
self.account_id = Some(input.into());
self
}
/// <p>Specifies the 12-digit account ID number of the Amazon Web Services account that you want to access or modify with this operation. If you don't specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation. To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account. The specified account ID must also be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>. It must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, don't specify this parameter. Instead, call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn set_account_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.account_id = input;
self
}
/// Consumes the builder and constructs a [`GetContactInformationInput`](crate::input::GetContactInformationInput).
pub fn build(
self,
) -> Result<
crate::input::GetContactInformationInput,
aws_smithy_http::operation::error::BuildError,
> {
Ok(crate::input::GetContactInformationInput {
account_id: self.account_id,
})
}
}
}
impl GetContactInformationInput {
/// Consumes the builder and constructs an Operation<[`GetContactInformation`](crate::operation::GetContactInformation)>
#[allow(unused_mut)]
#[allow(clippy::let_and_return)]
#[allow(clippy::needless_borrow)]
pub async fn make_operation(
&self,
_config: &crate::config::Config,
) -> std::result::Result<
aws_smithy_http::operation::Operation<
crate::operation::GetContactInformation,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::operation::error::BuildError,
> {
let params_result = crate::endpoint::Params::builder()
.set_region(_config.region.as_ref().map(|r| r.as_ref().to_owned()))
.set_use_dual_stack(_config.use_dual_stack)
.set_use_fips(_config.use_fips)
.set_endpoint(_config.endpoint_url.clone())
.build()
.map_err(|err| {
aws_smithy_http::endpoint::ResolveEndpointError::from_source(
"could not construct endpoint parameters",
err,
)
});
let (endpoint_result, params) = match params_result {
Ok(params) => (
_config.endpoint_resolver.resolve_endpoint(¶ms),
Some(params),
),
Err(e) => (Err(e), None),
};
let mut request = {
fn uri_base(
_input: &crate::input::GetContactInformationInput,
output: &mut String,
) -> Result<(), aws_smithy_http::operation::error::BuildError> {
write!(output, "/getContactInformation").expect("formatting should succeed");
Ok(())
}
#[allow(clippy::unnecessary_wraps)]
fn update_http_builder(
input: &crate::input::GetContactInformationInput,
builder: http::request::Builder,
) -> std::result::Result<
http::request::Builder,
aws_smithy_http::operation::error::BuildError,
> {
let mut uri = String::new();
uri_base(input, &mut uri)?;
Ok(builder.method("POST").uri(uri))
}
let mut builder = update_http_builder(&self, http::request::Builder::new())?;
builder = aws_smithy_http::header::set_request_header_if_absent(
builder,
http::header::CONTENT_TYPE,
"application/json",
);
builder
};
let mut properties = aws_smithy_http::property_bag::SharedPropertyBag::new();
#[allow(clippy::useless_conversion)]
let body = aws_smithy_http::body::SdkBody::from(
crate::operation_ser::serialize_operation_crate_operation_get_contact_information(
&self,
)?,
);
if let Some(content_length) = body.content_length() {
request = aws_smithy_http::header::set_request_header_if_absent(
request,
http::header::CONTENT_LENGTH,
content_length,
);
}
let request = request.body(body).expect("should be valid request");
let mut request = aws_smithy_http::operation::Request::from_parts(request, properties);
request.properties_mut().insert(endpoint_result);
if let Some(params) = params {
request.properties_mut().insert(params);
}
request
.properties_mut()
.insert(aws_smithy_http::http_versions::DEFAULT_HTTP_VERSION_LIST.clone());
let mut user_agent = aws_http::user_agent::AwsUserAgent::new_from_environment(
aws_types::os_shim_internal::Env::real(),
crate::API_METADATA.clone(),
);
if let Some(app_name) = _config.app_name() {
user_agent = user_agent.with_app_name(app_name.clone());
}
request.properties_mut().insert(user_agent);
let mut signing_config = aws_sig_auth::signer::OperationSigningConfig::default_config();
request.properties_mut().insert(signing_config);
request
.properties_mut()
.insert(aws_types::SigningService::from_static(
_config.signing_service(),
));
if let Some(region) = &_config.region {
request
.properties_mut()
.insert(aws_types::region::SigningRegion::from(region.clone()));
}
if let Some(region) = &_config.region {
request.properties_mut().insert(region.clone());
}
aws_http::auth::set_credentials_cache(
&mut request.properties_mut(),
_config.credentials_cache.clone(),
);
let op = aws_smithy_http::operation::Operation::new(
request,
crate::operation::GetContactInformation::new(),
)
.with_metadata(aws_smithy_http::operation::Metadata::new(
"GetContactInformation",
"account",
));
let op = op.with_retry_classifier(aws_http::retry::AwsResponseRetryClassifier::new());
Ok(op)
}
/// Creates a new builder-style object to manufacture [`GetContactInformationInput`](crate::input::GetContactInformationInput).
pub fn builder() -> crate::input::get_contact_information_input::Builder {
crate::input::get_contact_information_input::Builder::default()
}
}
/// See [`PutAlternateContactInput`](crate::input::PutAlternateContactInput).
pub mod put_alternate_contact_input {
/// A builder for [`PutAlternateContactInput`](crate::input::PutAlternateContactInput).
#[derive(std::clone::Clone, std::cmp::PartialEq, std::default::Default)]
pub struct Builder {
pub(crate) name: std::option::Option<std::string::String>,
pub(crate) title: std::option::Option<std::string::String>,
pub(crate) email_address: std::option::Option<std::string::String>,
pub(crate) phone_number: std::option::Option<std::string::String>,
pub(crate) alternate_contact_type: std::option::Option<crate::model::AlternateContactType>,
pub(crate) account_id: std::option::Option<std::string::String>,
}
impl Builder {
/// <p>Specifies a name for the alternate contact.</p>
pub fn name(mut self, input: impl Into<std::string::String>) -> Self {
self.name = Some(input.into());
self
}
/// <p>Specifies a name for the alternate contact.</p>
pub fn set_name(mut self, input: std::option::Option<std::string::String>) -> Self {
self.name = input;
self
}
/// <p>Specifies a title for the alternate contact.</p>
pub fn title(mut self, input: impl Into<std::string::String>) -> Self {
self.title = Some(input.into());
self
}
/// <p>Specifies a title for the alternate contact.</p>
pub fn set_title(mut self, input: std::option::Option<std::string::String>) -> Self {
self.title = input;
self
}
/// <p>Specifies an email address for the alternate contact. </p>
pub fn email_address(mut self, input: impl Into<std::string::String>) -> Self {
self.email_address = Some(input.into());
self
}
/// <p>Specifies an email address for the alternate contact. </p>
pub fn set_email_address(
mut self,
input: std::option::Option<std::string::String>,
) -> Self {
self.email_address = input;
self
}
/// <p>Specifies a phone number for the alternate contact.</p>
pub fn phone_number(mut self, input: impl Into<std::string::String>) -> Self {
self.phone_number = Some(input.into());
self
}
/// <p>Specifies a phone number for the alternate contact.</p>
pub fn set_phone_number(mut self, input: std::option::Option<std::string::String>) -> Self {
self.phone_number = input;
self
}
/// <p>Specifies which alternate contact you want to create or update.</p>
pub fn alternate_contact_type(mut self, input: crate::model::AlternateContactType) -> Self {
self.alternate_contact_type = Some(input);
self
}
/// <p>Specifies which alternate contact you want to create or update.</p>
pub fn set_alternate_contact_type(
mut self,
input: std::option::Option<crate::model::AlternateContactType>,
) -> Self {
self.alternate_contact_type = input;
self
}
/// <p>Specifies the 12 digit account ID number of the Amazon Web Services account that you want to access or modify with this operation.</p>
/// <p>If you do not specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation.</p>
/// <p>To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account, and the specified account ID must be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>; it must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, then don't specify this parameter, and call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn account_id(mut self, input: impl Into<std::string::String>) -> Self {
self.account_id = Some(input.into());
self
}
/// <p>Specifies the 12 digit account ID number of the Amazon Web Services account that you want to access or modify with this operation.</p>
/// <p>If you do not specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation.</p>
/// <p>To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account, and the specified account ID must be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>; it must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, then don't specify this parameter, and call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn set_account_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.account_id = input;
self
}
/// Consumes the builder and constructs a [`PutAlternateContactInput`](crate::input::PutAlternateContactInput).
pub fn build(
self,
) -> Result<
crate::input::PutAlternateContactInput,
aws_smithy_http::operation::error::BuildError,
> {
Ok(crate::input::PutAlternateContactInput {
name: self.name,
title: self.title,
email_address: self.email_address,
phone_number: self.phone_number,
alternate_contact_type: self.alternate_contact_type,
account_id: self.account_id,
})
}
}
impl std::fmt::Debug for Builder {
fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
let mut formatter = f.debug_struct("Builder");
formatter.field("name", &"*** Sensitive Data Redacted ***");
formatter.field("title", &"*** Sensitive Data Redacted ***");
formatter.field("email_address", &"*** Sensitive Data Redacted ***");
formatter.field("phone_number", &"*** Sensitive Data Redacted ***");
formatter.field("alternate_contact_type", &self.alternate_contact_type);
formatter.field("account_id", &self.account_id);
formatter.finish()
}
}
}
impl PutAlternateContactInput {
/// Consumes the builder and constructs an Operation<[`PutAlternateContact`](crate::operation::PutAlternateContact)>
#[allow(unused_mut)]
#[allow(clippy::let_and_return)]
#[allow(clippy::needless_borrow)]
pub async fn make_operation(
&self,
_config: &crate::config::Config,
) -> std::result::Result<
aws_smithy_http::operation::Operation<
crate::operation::PutAlternateContact,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::operation::error::BuildError,
> {
let params_result = crate::endpoint::Params::builder()
.set_region(_config.region.as_ref().map(|r| r.as_ref().to_owned()))
.set_use_dual_stack(_config.use_dual_stack)
.set_use_fips(_config.use_fips)
.set_endpoint(_config.endpoint_url.clone())
.build()
.map_err(|err| {
aws_smithy_http::endpoint::ResolveEndpointError::from_source(
"could not construct endpoint parameters",
err,
)
});
let (endpoint_result, params) = match params_result {
Ok(params) => (
_config.endpoint_resolver.resolve_endpoint(¶ms),
Some(params),
),
Err(e) => (Err(e), None),
};
let mut request = {
fn uri_base(
_input: &crate::input::PutAlternateContactInput,
output: &mut String,
) -> Result<(), aws_smithy_http::operation::error::BuildError> {
write!(output, "/putAlternateContact").expect("formatting should succeed");
Ok(())
}
#[allow(clippy::unnecessary_wraps)]
fn update_http_builder(
input: &crate::input::PutAlternateContactInput,
builder: http::request::Builder,
) -> std::result::Result<
http::request::Builder,
aws_smithy_http::operation::error::BuildError,
> {
let mut uri = String::new();
uri_base(input, &mut uri)?;
Ok(builder.method("POST").uri(uri))
}
let mut builder = update_http_builder(&self, http::request::Builder::new())?;
builder = aws_smithy_http::header::set_request_header_if_absent(
builder,
http::header::CONTENT_TYPE,
"application/json",
);
builder
};
let mut properties = aws_smithy_http::property_bag::SharedPropertyBag::new();
#[allow(clippy::useless_conversion)]
let body = aws_smithy_http::body::SdkBody::from(
crate::operation_ser::serialize_operation_crate_operation_put_alternate_contact(&self)?,
);
if let Some(content_length) = body.content_length() {
request = aws_smithy_http::header::set_request_header_if_absent(
request,
http::header::CONTENT_LENGTH,
content_length,
);
}
let request = request.body(body).expect("should be valid request");
let mut request = aws_smithy_http::operation::Request::from_parts(request, properties);
request.properties_mut().insert(endpoint_result);
if let Some(params) = params {
request.properties_mut().insert(params);
}
request
.properties_mut()
.insert(aws_smithy_http::http_versions::DEFAULT_HTTP_VERSION_LIST.clone());
let mut user_agent = aws_http::user_agent::AwsUserAgent::new_from_environment(
aws_types::os_shim_internal::Env::real(),
crate::API_METADATA.clone(),
);
if let Some(app_name) = _config.app_name() {
user_agent = user_agent.with_app_name(app_name.clone());
}
request.properties_mut().insert(user_agent);
let mut signing_config = aws_sig_auth::signer::OperationSigningConfig::default_config();
request.properties_mut().insert(signing_config);
request
.properties_mut()
.insert(aws_types::SigningService::from_static(
_config.signing_service(),
));
if let Some(region) = &_config.region {
request
.properties_mut()
.insert(aws_types::region::SigningRegion::from(region.clone()));
}
if let Some(region) = &_config.region {
request.properties_mut().insert(region.clone());
}
aws_http::auth::set_credentials_cache(
&mut request.properties_mut(),
_config.credentials_cache.clone(),
);
let op = aws_smithy_http::operation::Operation::new(
request,
crate::operation::PutAlternateContact::new(),
)
.with_metadata(aws_smithy_http::operation::Metadata::new(
"PutAlternateContact",
"account",
));
let op = op.with_retry_classifier(aws_http::retry::AwsResponseRetryClassifier::new());
Ok(op)
}
/// Creates a new builder-style object to manufacture [`PutAlternateContactInput`](crate::input::PutAlternateContactInput).
pub fn builder() -> crate::input::put_alternate_contact_input::Builder {
crate::input::put_alternate_contact_input::Builder::default()
}
}
/// See [`PutContactInformationInput`](crate::input::PutContactInformationInput).
pub mod put_contact_information_input {
/// A builder for [`PutContactInformationInput`](crate::input::PutContactInformationInput).
#[derive(std::clone::Clone, std::cmp::PartialEq, std::default::Default, std::fmt::Debug)]
pub struct Builder {
pub(crate) contact_information: std::option::Option<crate::model::ContactInformation>,
pub(crate) account_id: std::option::Option<std::string::String>,
}
impl Builder {
/// <p>Contains the details of the primary contact information associated with an Amazon Web Services account.</p>
pub fn contact_information(mut self, input: crate::model::ContactInformation) -> Self {
self.contact_information = Some(input);
self
}
/// <p>Contains the details of the primary contact information associated with an Amazon Web Services account.</p>
pub fn set_contact_information(
mut self,
input: std::option::Option<crate::model::ContactInformation>,
) -> Self {
self.contact_information = input;
self
}
/// <p>Specifies the 12-digit account ID number of the Amazon Web Services account that you want to access or modify with this operation. If you don't specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation. To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account. The specified account ID must also be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>. It must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, don't specify this parameter. Instead, call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn account_id(mut self, input: impl Into<std::string::String>) -> Self {
self.account_id = Some(input.into());
self
}
/// <p>Specifies the 12-digit account ID number of the Amazon Web Services account that you want to access or modify with this operation. If you don't specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation. To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account. The specified account ID must also be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>. It must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, don't specify this parameter. Instead, call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn set_account_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.account_id = input;
self
}
/// Consumes the builder and constructs a [`PutContactInformationInput`](crate::input::PutContactInformationInput).
pub fn build(
self,
) -> Result<
crate::input::PutContactInformationInput,
aws_smithy_http::operation::error::BuildError,
> {
Ok(crate::input::PutContactInformationInput {
contact_information: self.contact_information,
account_id: self.account_id,
})
}
}
}
impl PutContactInformationInput {
/// Consumes the builder and constructs an Operation<[`PutContactInformation`](crate::operation::PutContactInformation)>
#[allow(unused_mut)]
#[allow(clippy::let_and_return)]
#[allow(clippy::needless_borrow)]
pub async fn make_operation(
&self,
_config: &crate::config::Config,
) -> std::result::Result<
aws_smithy_http::operation::Operation<
crate::operation::PutContactInformation,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::operation::error::BuildError,
> {
let params_result = crate::endpoint::Params::builder()
.set_region(_config.region.as_ref().map(|r| r.as_ref().to_owned()))
.set_use_dual_stack(_config.use_dual_stack)
.set_use_fips(_config.use_fips)
.set_endpoint(_config.endpoint_url.clone())
.build()
.map_err(|err| {
aws_smithy_http::endpoint::ResolveEndpointError::from_source(
"could not construct endpoint parameters",
err,
)
});
let (endpoint_result, params) = match params_result {
Ok(params) => (
_config.endpoint_resolver.resolve_endpoint(¶ms),
Some(params),
),
Err(e) => (Err(e), None),
};
let mut request = {
fn uri_base(
_input: &crate::input::PutContactInformationInput,
output: &mut String,
) -> Result<(), aws_smithy_http::operation::error::BuildError> {
write!(output, "/putContactInformation").expect("formatting should succeed");
Ok(())
}
#[allow(clippy::unnecessary_wraps)]
fn update_http_builder(
input: &crate::input::PutContactInformationInput,
builder: http::request::Builder,
) -> std::result::Result<
http::request::Builder,
aws_smithy_http::operation::error::BuildError,
> {
let mut uri = String::new();
uri_base(input, &mut uri)?;
Ok(builder.method("POST").uri(uri))
}
let mut builder = update_http_builder(&self, http::request::Builder::new())?;
builder = aws_smithy_http::header::set_request_header_if_absent(
builder,
http::header::CONTENT_TYPE,
"application/json",
);
builder
};
let mut properties = aws_smithy_http::property_bag::SharedPropertyBag::new();
#[allow(clippy::useless_conversion)]
let body = aws_smithy_http::body::SdkBody::from(
crate::operation_ser::serialize_operation_crate_operation_put_contact_information(
&self,
)?,
);
if let Some(content_length) = body.content_length() {
request = aws_smithy_http::header::set_request_header_if_absent(
request,
http::header::CONTENT_LENGTH,
content_length,
);
}
let request = request.body(body).expect("should be valid request");
let mut request = aws_smithy_http::operation::Request::from_parts(request, properties);
request.properties_mut().insert(endpoint_result);
if let Some(params) = params {
request.properties_mut().insert(params);
}
request
.properties_mut()
.insert(aws_smithy_http::http_versions::DEFAULT_HTTP_VERSION_LIST.clone());
let mut user_agent = aws_http::user_agent::AwsUserAgent::new_from_environment(
aws_types::os_shim_internal::Env::real(),
crate::API_METADATA.clone(),
);
if let Some(app_name) = _config.app_name() {
user_agent = user_agent.with_app_name(app_name.clone());
}
request.properties_mut().insert(user_agent);
let mut signing_config = aws_sig_auth::signer::OperationSigningConfig::default_config();
request.properties_mut().insert(signing_config);
request
.properties_mut()
.insert(aws_types::SigningService::from_static(
_config.signing_service(),
));
if let Some(region) = &_config.region {
request
.properties_mut()
.insert(aws_types::region::SigningRegion::from(region.clone()));
}
if let Some(region) = &_config.region {
request.properties_mut().insert(region.clone());
}
aws_http::auth::set_credentials_cache(
&mut request.properties_mut(),
_config.credentials_cache.clone(),
);
let op = aws_smithy_http::operation::Operation::new(
request,
crate::operation::PutContactInformation::new(),
)
.with_metadata(aws_smithy_http::operation::Metadata::new(
"PutContactInformation",
"account",
));
let op = op.with_retry_classifier(aws_http::retry::AwsResponseRetryClassifier::new());
Ok(op)
}
/// Creates a new builder-style object to manufacture [`PutContactInformationInput`](crate::input::PutContactInformationInput).
pub fn builder() -> crate::input::put_contact_information_input::Builder {
crate::input::put_contact_information_input::Builder::default()
}
}
#[allow(missing_docs)] // documentation missing in model
#[non_exhaustive]
#[derive(std::clone::Clone, std::cmp::PartialEq, std::fmt::Debug)]
pub struct PutContactInformationInput {
/// <p>Contains the details of the primary contact information associated with an Amazon Web Services account.</p>
#[doc(hidden)]
pub contact_information: std::option::Option<crate::model::ContactInformation>,
/// <p>Specifies the 12-digit account ID number of the Amazon Web Services account that you want to access or modify with this operation. If you don't specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation. To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account. The specified account ID must also be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>. It must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, don't specify this parameter. Instead, call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
#[doc(hidden)]
pub account_id: std::option::Option<std::string::String>,
}
impl PutContactInformationInput {
/// <p>Contains the details of the primary contact information associated with an Amazon Web Services account.</p>
pub fn contact_information(&self) -> std::option::Option<&crate::model::ContactInformation> {
self.contact_information.as_ref()
}
/// <p>Specifies the 12-digit account ID number of the Amazon Web Services account that you want to access or modify with this operation. If you don't specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation. To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account. The specified account ID must also be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>. It must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, don't specify this parameter. Instead, call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn account_id(&self) -> std::option::Option<&str> {
self.account_id.as_deref()
}
}
#[allow(missing_docs)] // documentation missing in model
#[non_exhaustive]
#[derive(std::clone::Clone, std::cmp::PartialEq, std::fmt::Debug)]
pub struct GetContactInformationInput {
/// <p>Specifies the 12-digit account ID number of the Amazon Web Services account that you want to access or modify with this operation. If you don't specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation. To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account. The specified account ID must also be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>. It must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, don't specify this parameter. Instead, call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
#[doc(hidden)]
pub account_id: std::option::Option<std::string::String>,
}
impl GetContactInformationInput {
/// <p>Specifies the 12-digit account ID number of the Amazon Web Services account that you want to access or modify with this operation. If you don't specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation. To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account. The specified account ID must also be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>. It must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, don't specify this parameter. Instead, call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn account_id(&self) -> std::option::Option<&str> {
self.account_id.as_deref()
}
}
#[allow(missing_docs)] // documentation missing in model
#[non_exhaustive]
#[derive(std::clone::Clone, std::cmp::PartialEq)]
pub struct PutAlternateContactInput {
/// <p>Specifies a name for the alternate contact.</p>
#[doc(hidden)]
pub name: std::option::Option<std::string::String>,
/// <p>Specifies a title for the alternate contact.</p>
#[doc(hidden)]
pub title: std::option::Option<std::string::String>,
/// <p>Specifies an email address for the alternate contact. </p>
#[doc(hidden)]
pub email_address: std::option::Option<std::string::String>,
/// <p>Specifies a phone number for the alternate contact.</p>
#[doc(hidden)]
pub phone_number: std::option::Option<std::string::String>,
/// <p>Specifies which alternate contact you want to create or update.</p>
#[doc(hidden)]
pub alternate_contact_type: std::option::Option<crate::model::AlternateContactType>,
/// <p>Specifies the 12 digit account ID number of the Amazon Web Services account that you want to access or modify with this operation.</p>
/// <p>If you do not specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation.</p>
/// <p>To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account, and the specified account ID must be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>; it must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, then don't specify this parameter, and call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
#[doc(hidden)]
pub account_id: std::option::Option<std::string::String>,
}
impl PutAlternateContactInput {
/// <p>Specifies a name for the alternate contact.</p>
pub fn name(&self) -> std::option::Option<&str> {
self.name.as_deref()
}
/// <p>Specifies a title for the alternate contact.</p>
pub fn title(&self) -> std::option::Option<&str> {
self.title.as_deref()
}
/// <p>Specifies an email address for the alternate contact. </p>
pub fn email_address(&self) -> std::option::Option<&str> {
self.email_address.as_deref()
}
/// <p>Specifies a phone number for the alternate contact.</p>
pub fn phone_number(&self) -> std::option::Option<&str> {
self.phone_number.as_deref()
}
/// <p>Specifies which alternate contact you want to create or update.</p>
pub fn alternate_contact_type(
&self,
) -> std::option::Option<&crate::model::AlternateContactType> {
self.alternate_contact_type.as_ref()
}
/// <p>Specifies the 12 digit account ID number of the Amazon Web Services account that you want to access or modify with this operation.</p>
/// <p>If you do not specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation.</p>
/// <p>To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account, and the specified account ID must be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>; it must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, then don't specify this parameter, and call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn account_id(&self) -> std::option::Option<&str> {
self.account_id.as_deref()
}
}
impl std::fmt::Debug for PutAlternateContactInput {
fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
let mut formatter = f.debug_struct("PutAlternateContactInput");
formatter.field("name", &"*** Sensitive Data Redacted ***");
formatter.field("title", &"*** Sensitive Data Redacted ***");
formatter.field("email_address", &"*** Sensitive Data Redacted ***");
formatter.field("phone_number", &"*** Sensitive Data Redacted ***");
formatter.field("alternate_contact_type", &self.alternate_contact_type);
formatter.field("account_id", &self.account_id);
formatter.finish()
}
}
#[allow(missing_docs)] // documentation missing in model
#[non_exhaustive]
#[derive(std::clone::Clone, std::cmp::PartialEq, std::fmt::Debug)]
pub struct DeleteAlternateContactInput {
/// <p>Specifies which of the alternate contacts to delete. </p>
#[doc(hidden)]
pub alternate_contact_type: std::option::Option<crate::model::AlternateContactType>,
/// <p>Specifies the 12 digit account ID number of the Amazon Web Services account that you want to access or modify with this operation.</p>
/// <p>If you do not specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation.</p>
/// <p>To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account, and the specified account ID must be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>; it must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, then don't specify this parameter, and call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
#[doc(hidden)]
pub account_id: std::option::Option<std::string::String>,
}
impl DeleteAlternateContactInput {
/// <p>Specifies which of the alternate contacts to delete. </p>
pub fn alternate_contact_type(
&self,
) -> std::option::Option<&crate::model::AlternateContactType> {
self.alternate_contact_type.as_ref()
}
/// <p>Specifies the 12 digit account ID number of the Amazon Web Services account that you want to access or modify with this operation.</p>
/// <p>If you do not specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation.</p>
/// <p>To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account, and the specified account ID must be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>; it must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, then don't specify this parameter, and call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn account_id(&self) -> std::option::Option<&str> {
self.account_id.as_deref()
}
}
#[allow(missing_docs)] // documentation missing in model
#[non_exhaustive]
#[derive(std::clone::Clone, std::cmp::PartialEq, std::fmt::Debug)]
pub struct GetAlternateContactInput {
/// <p>Specifies which alternate contact you want to retrieve.</p>
#[doc(hidden)]
pub alternate_contact_type: std::option::Option<crate::model::AlternateContactType>,
/// <p>Specifies the 12 digit account ID number of the Amazon Web Services account that you want to access or modify with this operation.</p>
/// <p>If you do not specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation.</p>
/// <p>To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account, and the specified account ID must be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>; it must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, then don't specify this parameter, and call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
#[doc(hidden)]
pub account_id: std::option::Option<std::string::String>,
}
impl GetAlternateContactInput {
/// <p>Specifies which alternate contact you want to retrieve.</p>
pub fn alternate_contact_type(
&self,
) -> std::option::Option<&crate::model::AlternateContactType> {
self.alternate_contact_type.as_ref()
}
/// <p>Specifies the 12 digit account ID number of the Amazon Web Services account that you want to access or modify with this operation.</p>
/// <p>If you do not specify this parameter, it defaults to the Amazon Web Services account of the identity used to call the operation.</p>
/// <p>To use this parameter, the caller must be an identity in the <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#account">organization's management account</a> or a delegated administrator account, and the specified account ID must be a member account in the same organization. The organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html">all features enabled</a>, and the organization must have <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-trusted-access.html">trusted access</a> enabled for the Account Management service, and optionally a <a href="https://docs.aws.amazon.com/organizations/latest/userguide/using-orgs-delegated-admin.html">delegated admin</a> account assigned.</p> <note>
/// <p>The management account can't specify its own <code>AccountId</code>; it must call the operation in standalone context by not including the <code>AccountId</code> parameter.</p>
/// </note>
/// <p>To call this operation on an account that is not a member of an organization, then don't specify this parameter, and call the operation using an identity belonging to the account whose contacts you wish to retrieve or modify.</p>
pub fn account_id(&self) -> std::option::Option<&str> {
self.account_id.as_deref()
}
}