Module avrd::atxmega16e5 [−][src]
The module containing the values for the 'atxmega16e5' microcontroller The AVR ATxmega16E5 microcontroller
Variants
Pinout | Mcu age | Operating temperature | Operating voltage | Max speed | |
---|---|---|---|---|---|
ATxmega16E5-AU | QFP-QFN-32 | TQFP32 | -40°C - 85°C | 1.6V - 3.6V | 32 MHz |
ATxmega16E5-MU | QFP-QFN-32 | VQFN32 | -40°C - 85°C | 1.6V - 3.6V | 32 MHz |
ATxmega16E5-M4U | QFP-QFN-32 | UQFN32 | -40°C - 85°C | 1.6V - 3.6V | 32 MHz |
ATxmega16E5-AN | QFP-QFN-32 | TQFP32 | -40°C - 105°C | 1.6V - 3.6V | 32 MHz |
ATxmega16E5-MN | QFP-QFN-32 | VQFN32 | -40°C - 105°C | 1.6V - 3.6V | 32 MHz |
ATxmega16E5-M4N | QFP-QFN-32 | UQFN32 | -40°C - 105°C | 1.6V - 3.6V | 32 MHz |
Modules
ac_hysmode | Hysteresis mode selection |
ac_intlvl | Interrupt level |
ac_intmode | Interrupt mode |
ac_muxneg | Negative input multiplexer selection |
ac_muxpos | Positive input multiplexer selection |
ac_wintlvl | Window interrupt level |
ac_wintmode | Windows interrupt mode |
ac_wstate | Window mode state |
adc_ch_gain | Gain factor |
adc_ch_inputmode | Input mode |
adc_ch_intlvl | Interrupt level |
adc_ch_intmode | Interupt mode |
adc_ch_muxint | Internal input multiplexer selections |
adc_ch_muxneg | Negative input multiplexer selection |
adc_ch_muxpos | Positive input multiplexer selection |
adc_currlimit | Current Limitation |
adc_evact | Event action selection |
adc_evsel | Event channel input selection |
adc_prescaler | Clock prescaler |
adc_refsel | Voltage reference selection |
adc_resolution | Conversion result resolution |
adc_sampnum | Averaged Number of Samples |
bod | BOD operation |
bodlvl | Brownout Detection Voltage Level |
bootrst | Boot Loader Section Reset Vector |
ccp | CCP signatures |
clk_psadiv | Prescaler A Division Factor |
clk_psbcdiv | Prescaler B and C Division Factor |
clk_rtcsrc | RTC Clock Source |
clk_sclksel | System Clock Selection |
crc_reset | Reset |
crc_source | Input Source |
dac_chsel | Output channel selection |
dac_evsel | Event channel selection |
dac_refsel | Reference voltage selection |
edma_ch_destdir | Destination addressing mode |
edma_ch_dir | Memory Address Mode for Peripheral Ch., or Source Address Mode for Standard Ch. |
edma_ch_intlvl | Interrupt level |
edma_ch_reload | Memory Address Reload for Peripheral Ch., or Source Address Reload for Standard Ch. |
edma_ch_trigsrc | Transfer trigger source |
edma_chmode | Channel mode |
edma_dbufmode | Double buffer mode |
edma_primode | Priority mode |
evsys_chmux | Event Channel multiplexer input selection |
evsys_digfilt | Digital filter coefficient |
evsys_prescaler | Prescaler |
evsys_prescfilt | Prescaler Filter |
evsys_qdirm | Quadrature Decoder Index Recognition Mode |
fault_halta | Fault A Halt Action Selection |
fault_haltb | Fault B Halt Action Selection |
fault_idxcmd | Channel index Command |
fault_ramp | Ramp Mode Selection |
fault_srca | Fault A Source Selection |
fault_srcb | Fault B Source Selection |
fault_srce | Fault E Input Source Selection |
fuse_blba | Boot lock bits - application section |
fuse_blbat | Boot lock bits - application table section |
fuse_blbb | Boot lock bits - boot setcion |
fuse_lb | Lock bits |
hires_hren | High Resolution Mode |
hires_hrplus | High Resolution Plus Mode |
irda_evsel | Event channel selection |
nvm_blba | Boot lock bits - application section |
nvm_blbat | Boot lock bits - application table section |
nvm_blbb | Boot lock bits - boot setcion |
nvm_cmd | NVM Command |
nvm_eelvl | EEPROM ready interrupt level |
nvm_lb | Lock bits |
nvm_spmlvl | SPM ready interrupt level |
osc_frqrange | Oscillator Frequency Range |
osc_pllsrc | PLL Clock Source |
osc_rc32mcref | 32 MHz DFLL Calibration Reference |
osc_xoscsel | External Oscillator Selection and Startup Time |
port_intlvl | Port Interrupt Level |
port_isc | Input/Sense Configuration |
port_opc | Output/Pull Configuration |
portcfg_acout | Analog Comparator Output Port |
portcfg_clkevpin | Clock and Event Output Port |
portcfg_clkout | System Clock Output Port |
portcfg_clkoutsel | Peripheral Clock Output Select |
portcfg_evout | Event Output Port |
portcfg_evoutsel | Event Output Select |
portcfg_rtcclkout | RTC Clock Output Port |
rtc_compintlvl | Compare Interrupt level |
rtc_ovfintlvl | Overflow Interrupt level |
rtc_prescaler | Prescaler Factor |
sleep_smode | Sleep Mode |
spi_bufmode | Buffer Modes |
spi_intlvl | Interrupt level |
spi_mode | SPI Mode |
spi_prescaler | Prescaler setting |
sut | Start-up Time |
tc45_bytem | Byte Mode |
tc45_ccaintlvl | Compare or Capture Channel A Interrupt Level |
tc45_ccamode | Compare or Capture Channel A Mode |
tc45_ccbintlvl | Compare or Capture Channel B Interrupt Level |
tc45_ccbmode | Compare or Capture Channel B Mode |
tc45_cccintlvl | Compare or Capture Channel C Interrupt Level |
tc45_cccmode | Compare or Capture Channel C Mode |
tc45_ccdintlvl | Compare or Capture Channel D Interrupt Level |
tc45_ccdmode | Compare or Capture Channel D Mode |
tc45_circen | Circular Enable Mode |
tc45_clksel | Clock Selection |
tc45_cmd | Timer/Counter Command |
tc45_errintlvl | Error Interrupt Level |
tc45_evact | Event Action |
tc45_evsel | Event Selection |
tc45_hccamode | Compare or Capture High Channel A Mode |
tc45_hccbmode | Compare or Capture High Channel B Mode |
tc45_hcccmode | Compare or Capture High Channel C Mode |
tc45_hccdmode | Compare or Capture High Channel D Mode |
tc45_lccaintlvl | Compare or Capture Low Channel A Interrupt Level |
tc45_lccamode | Compare or Capture Low Channel A Mode |
tc45_lccbintlvl | Compare or Capture Low Channel B Interrupt Level |
tc45_lccbmode | Compare or Capture Low Channel B Mode |
tc45_lcccintlvl | Compare or Capture Low Channel C Interrupt Level |
tc45_lcccmode | Compare or Capture Low Channel C Mode |
tc45_lccdintlvl | Compare or Capture Low Channel D Interrupt Level |
tc45_lccdmode | Compare or Capture Low Channel D Mode |
tc45_ovfintlvl | Overflow Interrupt Level |
tc45_trgintlvl | Timer Trigger Restart Interrupt Level |
tc45_wgmode | Waveform Generation Mode |
twi_master_busstate | Master Bus State |
twi_master_cmd | Master Command |
twi_master_intlvl | Master Interrupt Level |
twi_master_timeout | Inactive Timeout |
twi_master_tmsext | Master/Slave Extend Timeout |
twi_master_ttimeout | Master Timeout |
twi_sdahold | SDA Hold Time |
twi_slave_cmd | Slave Command |
twi_slave_intlvl | Slave Interrupt Level |
twi_slave_ttimeout | Slave Ttimeout |
usart_chsize | Character Size |
usart_cmode | Communication Mode |
usart_dectype | Encoding and Decoding Type |
usart_dreintlvl | Data Register Empty Interrupt level |
usart_lutact | XCL LUT Action |
usart_pecact | XCL Peripheral Counter Action |
usart_pmode | Parity Mode |
usart_rxcintlvl | Receive Complete Interrupt level |
usart_rxsintlvl | Receive Start Interrupt level |
usart_txcintlvl | Transmit Complete Interrupt level |
wd | Watchdog (Window) Timeout Period |
wdt_per | Period setting |
wdt_wper | Closed window period |
wex_otmx | Output Matrix Mode |
xcl_cc_intlvl | Compare/Capture Interrupt level |
xcl_clksel | Clock Selection |
xcl_cmden | Command Enable |
xcl_cmdsel | Timer/Counter Command Selection |
xcl_cmpen | Compare Output Value Timer |
xcl_dlyconf | Delay Configuration on LUT |
xcl_dlysel | Delay Selection |
xcl_evact | Timer/Counter Event Action Selection |
xcl_evsrc | Timer/Counter Event Source Selection |
xcl_insel | Input Selection |
xcl_lut0outen | LUT0 Output Enable |
xcl_lutconf | LUT Configuration |
xcl_portsel | Port Selection |
xcl_tcmode | Timer/Counter Mode |
xcl_tcsel | Timer/Counter Selection |
xcl_unf_intlvl | Underflow Interrupt level |
Constants
AC | Bitfield on register |
AC0CTRL | Analog Comparator 0 Control. |
AC0CURR | Bitfield on register |
AC0MUXCTRL | Analog Comparator 0 MUX Control. |
AC1CTRL | Analog Comparator 1 Control. |
AC1CURR | Bitfield on register |
AC1MUXCTRL | Analog Comparator 1 MUX Control. |
ACACURRCAL | ACA Current Calibration Byte. |
ACEVOUT | Analog Comparator and Event Out Register. |
ACOUT | Bitfield on register |
ADC | Bitfield on register |
ADCACAL0 | ADCA Calibration Byte 0. |
ADCACAL1 | ADCA Calibration Byte 1. |
ADDR | Address Register. |
ADDR0 | Address Register 0. |
ADDR1 | Address Register 1. |
ADDR2 | Address Register 2. |
ADDRCTRL | Memory Address Control for Peripheral Ch., or Source Address Control for Standard Ch. |
ADDREN | Bitfield on register |
ADDRMASK | Address Mask Register. |
ANAINIT | Analog Startup Delay. |
AVGCTRL | Average Control Register. |
BANDGAP | Bitfield on register |
BAUD | Baurd Rate Control Register. |
BAUDCTRLA | Baud Rate Control Register A. |
BAUDCTRLB | Baud Rate Control Register B. |
BLANKB | Bitfield on register |
BLBA | Bitfield on register |
BLBAT | Bitfield on register |
BLBB | Bitfield on register |
BODACT | Bitfield on register |
BODLVL | Bitfield on register |
BODPD | Bitfield on register |
BOOTRST | Bitfield on register |
BSCALE | Bitfield on register |
BUFMODE | Bitfield on register |
BUFOVF | Bitfield on register |
C | Bitfield on register |
CAL | Calibration Value. |
CALA | Calibration Register A. |
CALB | Calibration Register B. |
CALH | Bitfield on register |
CALIB | Calibration Register. |
CALL | Bitfield on register |
CAPTB | Bitfield on register |
CCA | Compare or Capture A. |
CCABUF | Compare Or Capture A Buffer. |
CCABUFH | Compare Or Capture A Buffer high byte. |
CCABUFL | Compare Or Capture A Buffer low byte. |
CCAH | Compare or Capture A high byte. |
CCAIF | Bitfield on register |
CCAINTLVL | Bitfield on register |
CCAL | Compare or Capture A low byte. |
CCB | Compare or Capture B. |
CCBBUF | Compare Or Capture B Buffer. |
CCBBUFH | Compare Or Capture B Buffer high byte. |
CCBBUFL | Compare Or Capture B Buffer low byte. |
CCBH | Compare or Capture B high byte. |
CCBIF | Bitfield on register |
CCBINTLVL | Bitfield on register |
CCBL | Compare or Capture B low byte. |
CCC | Compare or Capture C. |
CCCBUF | Compare Or Capture C Buffer. |
CCCBUFH | Compare Or Capture C Buffer high byte. |
CCCBUFL | Compare Or Capture C Buffer low byte. |
CCCH | Compare or Capture C high byte. |
CCCL | Compare or Capture C low byte. |
CCD | Compare or Capture D. |
CCDBUF | Compare Or Capture D Buffer. |
CCDBUFH | Compare Or Capture D Buffer high byte. |
CCDBUFL | Compare Or Capture D Buffer low byte. |
CCDH | Compare or Capture D high byte. |
CCDL | Compare or Capture D low byte. |
CCP | Configuration Change Protection. |
CH0CTRL | Channel 0 Control Register. |
CH0DATA | Channel 0 Data. |
CH0DATAH | Channel 0 Data high byte. |
CH0DATAL | Channel 0 Data low byte. |
CH0GAINCAL | Gain Calibration. |
CH0MUX | Event Channel 0 Multiplexer. |
CH0OFFSETCAL | Offset Calibration. |
CH0RES | Channel 0 Result. |
CH0RESH | Channel 0 Result high byte. |
CH0RESL | Channel 0 Result low byte. |
CH1CTRL | Channel 1 Control Register. |
CH1DATA | Channel 1 Data. |
CH1DATAH | Channel 1 Data high byte. |
CH1DATAL | Channel 1 Data low byte. |
CH1GAINCAL | Gain Calibration. |
CH1MUX | Event Channel 1 Multiplexer. |
CH1OFFSETCAL | Offset Calibration. |
CH2CTRL | Channel 2 Control Register. |
CH2MUX | Event Channel 2 Multiplexer. |
CH3CTRL | Channel 3 Control Register. |
CH3MUX | Event Channel 3 Multiplexer. |
CH4CTRL | Channel 4 Control Register. |
CH4MUX | Event Channel 4 Multiplexer. |
CH5CTRL | Channel 5 Control Register. |
CH5MUX | Event Channel 5 Multiplexer. |
CH6CTRL | Channel 6 Control Register. |
CH6MUX | Event Channel 6 Multiplexer. |
CH7CTRL | Channel 7 Control Register. |
CH7MUX | Event Channel 7 Multiplexer. |
CHECKSUM0 | Checksum byte 0. |
CHECKSUM1 | Checksum byte 1. |
CHECKSUM2 | Checksum byte 2. |
CHECKSUM3 | Checksum byte 3. |
CHSIZE | Bitfield on register |
CLKEVPIN | Bitfield on register |
CLKOUT | Clock Out Register. |
CLKOUTSEL | Bitfield on register |
CMD | Command. |
CMODE | Bitfield on register |
CMP | Compare Value. |
CMPH | Compare Register High. |
CMPL | Compare Register Low. |
CNT | Count. |
CNTH | Counter Register High. |
CNTL | Counter Register Low. |
COMP | Compare Register. |
COMP0 | Oscillator Compare Register 0. |
COMP1 | Oscillator Compare Register 1. |
COMP2 | Oscillator Compare Register 2. |
COMPH | Compare Register high byte. |
COMPL | Compare Register low byte. |
COORDX0 | Wafer Coordinate X Byte 0. |
COORDX1 | Wafer Coordinate X Byte 1. |
COORDY0 | Wafer Coordinate Y Byte 0. |
COORDY1 | Wafer Coordinate Y Byte 1. |
CORRCTRL | Correction Control Register. |
CORREN | Bitfield on register |
CTRL | Control Register. |
CTRLA | Control Register A. |
CTRLB | Control Register B. |
CTRLC | Control Register C. |
CTRLD | Control Register D. |
CTRLE | Control E Register. |
CTRLF | Control Register F. |
CTRLG | Control Register G. |
CTRLGCLR | Control Register G Clear. |
CTRLGSET | Control Register G set. |
CTRLHCLR | Control Register H Clear. |
CTRLHSET | Control Register H Set. |
CURRCALIB | Current Source Calibration Register. |
CURRCTRL | Current Source Control Register. |
CURREN | Bitfield on register |
CURRMODE | Bitfield on register |
DAC | Bitfield on register |
DACA0GAINCAL | DACA0 Calibration Byte 1. |
DACA0OFFCAL | DACA0 Calibration Byte 0. |
DACA1GAINCAL | DACA1 Calibration Byte 1. |
DACA1OFFCAL | DACA1 Calibration Byte 0. |
DATA | Data Register. |
DATA0 | Data Register 0. |
DATA1 | Data Register 1. |
DATA2 | Data Register 2. |
DATAIN | Data Input. |
DECTYPE | Bitfield on register |
DESTADDR | Channel Destination Address for Standard Channels Only. |
DESTADDRCTRL | Destination Address Control for Standard Channels Only. |
DESTADDRH | Channel Destination Address for Standard Channels Only. high byte. |
DESTADDRL | Channel Destination Address for Standard Channels Only. low byte. |
DESTDIR | Bitfield on register |
DESTRELOAD | Bitfield on register |
DEVID0 | Device ID byte 0. |
DEVID1 | Device ID byte 1. |
DEVID2 | Device ID byte 2. |
DFCTRL | Digital Filter Control Register. |
DFLLCTRL | DFLL Control Register. |
DIR | I/O Port Data Direction. |
DIRCLR | I/O Port Data Direction Clear. |
DIRSET | I/O Port Data Direction Set. |
DIRTGL | I/O Port Data Direction Toggle. |
DREIE | Bitfield on register |
DREIF | Bitfield on register |
DREINTLVL | Bitfield on register |
DRIE | Bitfield on register |
DTBOTH | Dead-time Concurrent Write to Both Sides Register. |
DTHS | Dead-time High Side Register. |
DTLS | Dead-time Low Side Register. |
EDMA | Bitfield on register |
EESAVE | Bitfield on register |
EIND | Extended Indirect Jump. |
ERRIF | Bitfield on register |
ERRINTLVL | Bitfield on register |
ERROR | Bitfield on register |
EVACT0 | Bitfield on register |
EVACT1 | Bitfield on register |
EVACTEN | Bitfield on register |
EVASYEN | Bitfield on register |
EVCTRL | Event Input Control. |
EVOUT | Bitfield on register |
EVOUTSEL | Bitfield on register |
EVSPLIT | Bitfield on register |
EVSRC | Bitfield on register |
EVSYS | Bitfield on register |
EVSYS0LOCK | Bitfield on register |
EVSYS1LOCK | Bitfield on register |
EVSYSLOCK | Event System Lock. |
FAULTA | Bitfield on register |
FAULTASW | Bitfield on register |
FAULTB | Bitfield on register |
FAULTBSW | Bitfield on register |
FAULTC4LOCK | Bitfield on register |
FAULTC5LOCK | Bitfield on register |
FAULTE | Bitfield on register |
FAULTESW | Bitfield on register |
FAULTLOCK | FAULT Lock. |
FDACT4 | Bitfield on register |
FDACT5 | Bitfield on register |
FILTERB | Bitfield on register |
FILTSEL | Bitfield on register |
FRQRANGE | Bitfield on register |
FUSEBYTE1 | Watchdog Configuration. |
FUSEBYTE2 | Reset Configuration. |
FUSEBYTE4 | Start-up Configuration. |
FUSEBYTE5 | EESAVE and BOD Level. |
FUSEBYTE6 | Fault State. |
GAINCORR | Bitfield on register |
GAINCORR0 | Gain Correction Register 0. |
GAINCORR1 | Gain Correction Register 1. |
GPIOR0 | General Purpose IO Register 0. |
GPIOR1 | General Purpose IO Register 1. |
GPIOR2 | General Purpose IO Register 2. |
GPIOR3 | General Purpose IO Register 3. |
H | Bitfield on register |
HALTACLR | Bitfield on register |
HALTBCLR | Bitfield on register |
HCCAMODE | Bitfield on register |
HCCBMODE | Bitfield on register |
HIRES | Bitfield on register |
HOTTEMP | Temperature corresponds to TEMPSENSE1/0. |
I | Bitfield on register |
IDXCMD | Bitfield on register |
IF | Bitfield on register |
IN | I/O port Input. |
INPUTOFFSET | Bitfield on register |
INPUTSCAN | Bitfield on register |
INTCTRL | Interrupt Control Register. |
INTCTRLA | Interrupt Control Register A. |
INTCTRLB | Interrupt Control Register B. |
INTFLAGS | Interrupt Flag Register. |
INTMASK | Port Interrupt Mask. |
INTPRI | Interrupt Priority. |
LB | Bitfield on register |
LCCAIF | Bitfield on register |
LCCAINTLVL | Bitfield on register |
LCCBIF | Bitfield on register |
LCCBINTLVL | Bitfield on register |
LOCK | Lock register. |
LOCKBITS | Lock Bits. |
LOTNUM0 | Lot Number Byte 0, ASCII. |
LOTNUM1 | Lot Number Byte 1, ASCII. |
LOTNUM2 | Lot Number Byte 2, ASCII. |
LOTNUM3 | Lot Number Byte 3, ASCII. |
LOTNUM4 | Lot Number Byte 4, ASCII. |
LOTNUM5 | Lot Number Byte 5, ASCII. |
LUTACT | Bitfield on register |
MPCMASK | Multi-pin Configuration Mask. |
MUXCTRL | MUX Control. |
MUXINT | Bitfield on register |
N | Bitfield on register |
OCDR0 | OCD Register 0. |
OCDR1 | OCD Register 1. |
OFFSETCORR | Bitfield on register |
OFFSETCORR0 | Offset Correction Register 0. |
OFFSETCORR1 | Offset Correction Register 1. |
OUT | I/O Port Output. |
OUTCLR | I/O Port Output Clear. |
OUTOVDIS | Output Override Disable Register. |
OUTSET | I/O Port Output Set. |
OUTTGL | I/O Port Output Toggle. |
OVFIF | Bitfield on register |
OVFINTLVL | Bitfield on register |
PCNT20 | Bitfield on register |
PCNT21 | Bitfield on register |
PECACT | Bitfield on register |
PER | Period. |
PERBUF | Period Buffer. |
PERBUFH | Period Buffer high byte. |
PERBUFL | Period Buffer low byte. |
PERCAPTH | Period or Capture Register High. |
PERCAPTL | Period or Capture Register Low. |
PERH | Period high byte. |
PERL | Period low byte. |
PGO | Pattern Generation Override Register. |
PGOBUF | Pattern Generation Overwrite Buffer Register. |
PGV | Pattern Generation Value Register. |
PGVBUF | Pattern Generation Value Buffer Register. |
PIN0CTRL | Pin 0 Control Register. |
PIN1CTRL | Pin 1 Control Register. |
PIN2CTRL | Pin 2 Control Register. |
PIN3CTRL | Pin 3 Control Register. |
PIN4CTRL | Pin 4 Control Register. |
PIN5CTRL | Pin 5 Control Register. |
PIN6CTRL | Pin 6 Control Register. |
PIN7CTRL | Pin 7 Control Register. |
PLC | Peripheral Lenght Control Register. |
PLLCTRL | PLL Control Register. |
PLLDIV | Bitfield on register |
PLLFAC | Bitfield on register |
PLLFDEN | Bitfield on register |
PLLFDIF | Bitfield on register |
PLLSRC | Bitfield on register |
PMODE | Bitfield on register |
PRESC | Bitfield on register |
PRESCALER | Clock Prescaler. |
PRESCFILT | Bitfield on register |
PRGEN | General Power Reduction. |
PRPA | Power Reduction Port A. |
PRPC | Power Reduction Port C. |
PRPD | Power Reduction Port D. |
PSADIV | Bitfield on register |
PSBCDIV | Bitfield on register |
PSCTRL | Prescaler Control Register. |
QDEN | Bitfield on register |
QDIEN | Bitfield on register |
QDIRM | Bitfield on register |
QUALB | Bitfield on register |
RAMPD | Ramp D. |
RAMPX | Ramp X. |
RAMPY | Ramp Y. |
RAMPZ | Ramp Z. |
RC8MCAL | Internal 8 MHz RC Oscillator Calibration Register. |
RC32KCAL | 32.768 kHz Internal Oscillator Calibration Register. |
RC32MCREF | Bitfield on register |
RCOSC8M | RCOSC 8MHz Calibration Value. |
RCOSC32K | RCOSC 32.768 kHz Calibration Value. |
RCOSC32M | RCOSC 32 MHz Calibration Value B. |
RCOSC32MA | RCOSC 32 MHz Calibration Value A. |
REFCTRL | Reference Control. |
REFSEL | Bitfield on register |
RELOAD | Bitfield on register |
REMAP | Pin Remap Register. |
RES | Channel Result. |
RESH | Channel Result high byte. |
RESL | Channel Result low byte. |
REVID | Revision ID. |
RIGHTSHIFT | Bitfield on register |
ROOMTEMP | Temperature corresponds to TEMPSENSE3/2. |
ROTARY | Bitfield on register |
RSTDISBL | Bitfield on register |
RTC | Bitfield on register |
RTCCTRL | RTC Control Register. |
RTCEN | Bitfield on register |
RTCOUT | Bitfield on register |
RTCSRC | Bitfield on register |
RXCIE | Bitfield on register |
RXCIF | Bitfield on register |
RXCINTLVL | Bitfield on register |
RXPLCTRL | IrDA Receiver Pulse Length Control Register. |
RXSIE | Bitfield on register |
S | Bitfield on register |
SAMPCTRL | ADC Sampling Time Control Register. |
SAMPNUM | Bitfield on register |
SAMPVAL | Bitfield on register |
SBMODE | Bitfield on register |
SCAN | Input Channel Scan. |
SIGN | Bitfield on register |
SPH | Stack Pointer High. |
SPI | Bitfield on register |
SPL | Stack Pointer Low. |
SREG | Status Register. |
SRLCTRL | Slew Rate Limit Control Register. |
SRLENRA | Bitfield on register |
SRLENRC | Bitfield on register |
SRLENRD | Bitfield on register |
SRLENRR | Bitfield on register |
SSD | Bitfield on register |
SSIE | Bitfield on register |
SSIF | Bitfield on register |
STARTUPDLYA | Bitfield on register |
STATEECLR | Bitfield on register |
STATUS | Status Register. |
STATUSCLR | Status Clear Register. |
STATUSSET | Status Set Register. |
STROBE | Event Strobe. |
SUT | Bitfield on register |
SWAP | Swap Register. |
SWAP0 | Bitfield on register |
SWAP0BUF | Bitfield on register |
SWAP1 | Bitfield on register |
SWAP1BUF | Bitfield on register |
SWAP2 | Bitfield on register |
SWAP2BUF | Bitfield on register |
SWAP3 | Bitfield on register |
SWAP3BUF | Bitfield on register |
SWAPBUF | Dead Time Low Side Buffer. |
T | Bitfield on register |
TC4 | Bitfield on register |
TC4A | Bitfield on register |
TC4B | Bitfield on register |
TC4C | Bitfield on register |
TC4D | Bitfield on register |
TEMP | Temporary Register For 16-bit Access. |
TEMPREF | Bitfield on register |
TEMPSENSE0 | Temperature Sensor Calibration Byte 0. |
TEMPSENSE1 | Temperature Sensor Calibration Byte 1. |
TEMPSENSE2 | Temperature Sensor Calibration Byte 2. |
TEMPSENSE3 | Temperature Sensor Calibration Byte 3. |
TMEXTIF | Bitfield on register |
TMSEXTSEL | Bitfield on register |
TOCONF | Timeout Configuration Register. |
TOS | Timeout Status Register. |
TRFCNT | Channel Block Transfer Count for Peripheral Ch., or Channel Block Transfer Count Low for Standard Ch. |
TRFCNTH | Channel Block Transfer Count for Peripheral Ch., or Channel Block Transfer Count Low for Standard Ch. high byte. |
TRFCNTL | Channel Block Transfer Count for Peripheral Ch., or Channel Block Transfer Count Low for Standard Ch. low byte. |
TRGIF | Bitfield on register |
TRGINTLVL | Bitfield on register |
TRIGSRC | Channel Trigger Source. |
TSEXTIF | Bitfield on register |
TTOUTMIF | Bitfield on register |
TTOUTMSEL | Bitfield on register |
TTOUTSIF | Bitfield on register |
TTOUTSSEL | Bitfield on register |
TWI | Bitfield on register |
TXCIE | Bitfield on register |
TXCIF | Bitfield on register |
TXCINTLVL | Bitfield on register |
TXPLCTRL | IrDA Transmitter Pulse Length Control Register. |
V | Bitfield on register |
VALUE | Bitfield on register |
WAFNUM | Wafer Number. |
WDLOCK | Bitfield on register |
WDP | Bitfield on register |
WDWP | Bitfield on register |
WEN | Bitfield on register |
WEXCLOCK | Bitfield on register |
WEXLOCK | WEX Lock. |
WINCTRL | Window Mode Control. |
WINTLVL | Bitfield on register |
WINTMODE | Bitfield on register |
WRCOL | Bitfield on register |
X32KLPM | Bitfield on register |
XCL | Bitfield on register |
XOSCCTRL | External Oscillator Control Register. |
XOSCFAIL | Oscillator Failure Detection Register. |
XOSCFDEN | Bitfield on register |
XOSCFDIF | Bitfield on register |
XOSCPWR | Bitfield on register |
XOSCSEL | Bitfield on register |
Z | Bitfield on register |