#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
_reserved_0_us_cr: [u8; 4usize],
_reserved_1_us_mr: [u8; 4usize],
_reserved_2_us_ier: [u8; 4usize],
_reserved_3_us_idr: [u8; 4usize],
_reserved_4_us_imr: [u8; 4usize],
_reserved_5_us_csr: [u8; 4usize],
#[doc = "0x18 - Receive Holding Register"]
pub us_rhr: US_RHR,
#[doc = "0x1c - Transmit Holding Register"]
pub us_thr: US_THR,
#[doc = "0x20 - Baud Rate Generator Register"]
pub us_brgr: US_BRGR,
#[doc = "0x24 - Receiver Timeout Register"]
pub us_rtor: US_RTOR,
_reserved_10_us_ttgr: [u8; 4usize],
_reserved11: [u8; 20usize],
_reserved_11_us_fidi: [u8; 4usize],
#[doc = "0x44 - Number of Errors Register"]
pub us_ner: US_NER,
_reserved13: [u8; 4usize],
#[doc = "0x4c - IrDA Filter Register"]
pub us_if: US_IF,
#[doc = "0x50 - Manchester Configuration Register"]
pub us_man: US_MAN,
#[doc = "0x54 - LIN Mode Register"]
pub us_linmr: US_LINMR,
#[doc = "0x58 - LIN Identifier Register"]
pub us_linir: US_LINIR,
#[doc = "0x5c - LIN Baud Rate Register"]
pub us_linbrr: US_LINBRR,
#[doc = "0x60 - LON Mode Register"]
pub us_lonmr: US_LONMR,
#[doc = "0x64 - LON Preamble Register"]
pub us_lonpr: US_LONPR,
#[doc = "0x68 - LON Data Length Register"]
pub us_londl: US_LONDL,
#[doc = "0x6c - LON L2HDR Register"]
pub us_lonl2hdr: US_LONL2HDR,
#[doc = "0x70 - LON Backlog Register"]
pub us_lonbl: US_LONBL,
#[doc = "0x74 - LON Beta1 Tx Register"]
pub us_lonb1tx: US_LONB1TX,
#[doc = "0x78 - LON Beta1 Rx Register"]
pub us_lonb1rx: US_LONB1RX,
#[doc = "0x7c - LON Priority Register"]
pub us_lonprio: US_LONPRIO,
#[doc = "0x80 - LON IDT Tx Register"]
pub us_idttx: US_IDTTX,
#[doc = "0x84 - LON IDT Rx Register"]
pub us_idtrx: US_IDTRX,
#[doc = "0x88 - IC DIFF Register"]
pub us_icdiff: US_ICDIFF,
_reserved29: [u8; 88usize],
#[doc = "0xe4 - Write Protection Mode Register"]
pub us_wpmr: US_WPMR,
#[doc = "0xe8 - Write Protection Status Register"]
pub us_wpsr: US_WPSR,
}
impl RegisterBlock {
#[doc = "0x00 - Control Register"]
#[inline(always)]
pub fn us_cr_lin_mode(&self) -> &US_CR_LIN_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(0usize) as *const US_CR_LIN_MODE) }
}
#[doc = "0x00 - Control Register"]
#[inline(always)]
pub fn us_cr_lin_mode_mut(&self) -> &mut US_CR_LIN_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(0usize) as *mut US_CR_LIN_MODE) }
}
#[doc = "0x00 - Control Register"]
#[inline(always)]
pub fn us_cr_spi_mode(&self) -> &US_CR_SPI_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(0usize) as *const US_CR_SPI_MODE) }
}
#[doc = "0x00 - Control Register"]
#[inline(always)]
pub fn us_cr_spi_mode_mut(&self) -> &mut US_CR_SPI_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(0usize) as *mut US_CR_SPI_MODE) }
}
#[doc = "0x00 - Control Register"]
#[inline(always)]
pub fn us_cr_usart_mode(&self) -> &US_CR_USART_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(0usize) as *const US_CR_USART_MODE) }
}
#[doc = "0x00 - Control Register"]
#[inline(always)]
pub fn us_cr_usart_mode_mut(&self) -> &mut US_CR_USART_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(0usize) as *mut US_CR_USART_MODE) }
}
#[doc = "0x04 - Mode Register"]
#[inline(always)]
pub fn us_mr_spi_mode(&self) -> &US_MR_SPI_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(4usize) as *const US_MR_SPI_MODE) }
}
#[doc = "0x04 - Mode Register"]
#[inline(always)]
pub fn us_mr_spi_mode_mut(&self) -> &mut US_MR_SPI_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(4usize) as *mut US_MR_SPI_MODE) }
}
#[doc = "0x04 - Mode Register"]
#[inline(always)]
pub fn us_mr_usart_mode(&self) -> &US_MR_USART_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(4usize) as *const US_MR_USART_MODE) }
}
#[doc = "0x04 - Mode Register"]
#[inline(always)]
pub fn us_mr_usart_mode_mut(&self) -> &mut US_MR_USART_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(4usize) as *mut US_MR_USART_MODE) }
}
#[doc = "0x08 - Interrupt Enable Register"]
#[inline(always)]
pub fn us_ier_lon_spi_mode(&self) -> &US_IER_LON_SPI_MODE {
unsafe {
&*(((self as *const Self) as *const u8).add(8usize) as *const US_IER_LON_SPI_MODE)
}
}
#[doc = "0x08 - Interrupt Enable Register"]
#[inline(always)]
pub fn us_ier_lon_spi_mode_mut(&self) -> &mut US_IER_LON_SPI_MODE {
unsafe {
&mut *(((self as *const Self) as *mut u8).add(8usize) as *mut US_IER_LON_SPI_MODE)
}
}
#[doc = "0x08 - Interrupt Enable Register"]
#[inline(always)]
pub fn us_ier_lon_mode(&self) -> &US_IER_LON_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(8usize) as *const US_IER_LON_MODE) }
}
#[doc = "0x08 - Interrupt Enable Register"]
#[inline(always)]
pub fn us_ier_lon_mode_mut(&self) -> &mut US_IER_LON_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(8usize) as *mut US_IER_LON_MODE) }
}
#[doc = "0x08 - Interrupt Enable Register"]
#[inline(always)]
pub fn us_ier_lin_mode(&self) -> &US_IER_LIN_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(8usize) as *const US_IER_LIN_MODE) }
}
#[doc = "0x08 - Interrupt Enable Register"]
#[inline(always)]
pub fn us_ier_lin_mode_mut(&self) -> &mut US_IER_LIN_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(8usize) as *mut US_IER_LIN_MODE) }
}
#[doc = "0x08 - Interrupt Enable Register"]
#[inline(always)]
pub fn us_ier_spi_mode(&self) -> &US_IER_SPI_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(8usize) as *const US_IER_SPI_MODE) }
}
#[doc = "0x08 - Interrupt Enable Register"]
#[inline(always)]
pub fn us_ier_spi_mode_mut(&self) -> &mut US_IER_SPI_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(8usize) as *mut US_IER_SPI_MODE) }
}
#[doc = "0x08 - Interrupt Enable Register"]
#[inline(always)]
pub fn us_ier_usart_lin_mode(&self) -> &US_IER_USART_LIN_MODE {
unsafe {
&*(((self as *const Self) as *const u8).add(8usize) as *const US_IER_USART_LIN_MODE)
}
}
#[doc = "0x08 - Interrupt Enable Register"]
#[inline(always)]
pub fn us_ier_usart_lin_mode_mut(&self) -> &mut US_IER_USART_LIN_MODE {
unsafe {
&mut *(((self as *const Self) as *mut u8).add(8usize) as *mut US_IER_USART_LIN_MODE)
}
}
#[doc = "0x08 - Interrupt Enable Register"]
#[inline(always)]
pub fn us_ier_usart_mode(&self) -> &US_IER_USART_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(8usize) as *const US_IER_USART_MODE) }
}
#[doc = "0x08 - Interrupt Enable Register"]
#[inline(always)]
pub fn us_ier_usart_mode_mut(&self) -> &mut US_IER_USART_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(8usize) as *mut US_IER_USART_MODE) }
}
#[doc = "0x0c - Interrupt Disable Register"]
#[inline(always)]
pub fn us_idr_lon_spi_mode(&self) -> &US_IDR_LON_SPI_MODE {
unsafe {
&*(((self as *const Self) as *const u8).add(12usize) as *const US_IDR_LON_SPI_MODE)
}
}
#[doc = "0x0c - Interrupt Disable Register"]
#[inline(always)]
pub fn us_idr_lon_spi_mode_mut(&self) -> &mut US_IDR_LON_SPI_MODE {
unsafe {
&mut *(((self as *const Self) as *mut u8).add(12usize) as *mut US_IDR_LON_SPI_MODE)
}
}
#[doc = "0x0c - Interrupt Disable Register"]
#[inline(always)]
pub fn us_idr_lon_mode(&self) -> &US_IDR_LON_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(12usize) as *const US_IDR_LON_MODE) }
}
#[doc = "0x0c - Interrupt Disable Register"]
#[inline(always)]
pub fn us_idr_lon_mode_mut(&self) -> &mut US_IDR_LON_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(12usize) as *mut US_IDR_LON_MODE) }
}
#[doc = "0x0c - Interrupt Disable Register"]
#[inline(always)]
pub fn us_idr_lin_mode(&self) -> &US_IDR_LIN_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(12usize) as *const US_IDR_LIN_MODE) }
}
#[doc = "0x0c - Interrupt Disable Register"]
#[inline(always)]
pub fn us_idr_lin_mode_mut(&self) -> &mut US_IDR_LIN_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(12usize) as *mut US_IDR_LIN_MODE) }
}
#[doc = "0x0c - Interrupt Disable Register"]
#[inline(always)]
pub fn us_idr_spi_mode(&self) -> &US_IDR_SPI_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(12usize) as *const US_IDR_SPI_MODE) }
}
#[doc = "0x0c - Interrupt Disable Register"]
#[inline(always)]
pub fn us_idr_spi_mode_mut(&self) -> &mut US_IDR_SPI_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(12usize) as *mut US_IDR_SPI_MODE) }
}
#[doc = "0x0c - Interrupt Disable Register"]
#[inline(always)]
pub fn us_idr_usart_lin_mode(&self) -> &US_IDR_USART_LIN_MODE {
unsafe {
&*(((self as *const Self) as *const u8).add(12usize) as *const US_IDR_USART_LIN_MODE)
}
}
#[doc = "0x0c - Interrupt Disable Register"]
#[inline(always)]
pub fn us_idr_usart_lin_mode_mut(&self) -> &mut US_IDR_USART_LIN_MODE {
unsafe {
&mut *(((self as *const Self) as *mut u8).add(12usize) as *mut US_IDR_USART_LIN_MODE)
}
}
#[doc = "0x0c - Interrupt Disable Register"]
#[inline(always)]
pub fn us_idr_usart_mode(&self) -> &US_IDR_USART_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(12usize) as *const US_IDR_USART_MODE) }
}
#[doc = "0x0c - Interrupt Disable Register"]
#[inline(always)]
pub fn us_idr_usart_mode_mut(&self) -> &mut US_IDR_USART_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(12usize) as *mut US_IDR_USART_MODE) }
}
#[doc = "0x10 - Interrupt Mask Register"]
#[inline(always)]
pub fn us_imr_lon_spi_mode(&self) -> &US_IMR_LON_SPI_MODE {
unsafe {
&*(((self as *const Self) as *const u8).add(16usize) as *const US_IMR_LON_SPI_MODE)
}
}
#[doc = "0x10 - Interrupt Mask Register"]
#[inline(always)]
pub fn us_imr_lon_spi_mode_mut(&self) -> &mut US_IMR_LON_SPI_MODE {
unsafe {
&mut *(((self as *const Self) as *mut u8).add(16usize) as *mut US_IMR_LON_SPI_MODE)
}
}
#[doc = "0x10 - Interrupt Mask Register"]
#[inline(always)]
pub fn us_imr_lon_mode(&self) -> &US_IMR_LON_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(16usize) as *const US_IMR_LON_MODE) }
}
#[doc = "0x10 - Interrupt Mask Register"]
#[inline(always)]
pub fn us_imr_lon_mode_mut(&self) -> &mut US_IMR_LON_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(16usize) as *mut US_IMR_LON_MODE) }
}
#[doc = "0x10 - Interrupt Mask Register"]
#[inline(always)]
pub fn us_imr_lin_mode(&self) -> &US_IMR_LIN_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(16usize) as *const US_IMR_LIN_MODE) }
}
#[doc = "0x10 - Interrupt Mask Register"]
#[inline(always)]
pub fn us_imr_lin_mode_mut(&self) -> &mut US_IMR_LIN_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(16usize) as *mut US_IMR_LIN_MODE) }
}
#[doc = "0x10 - Interrupt Mask Register"]
#[inline(always)]
pub fn us_imr_spi_mode(&self) -> &US_IMR_SPI_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(16usize) as *const US_IMR_SPI_MODE) }
}
#[doc = "0x10 - Interrupt Mask Register"]
#[inline(always)]
pub fn us_imr_spi_mode_mut(&self) -> &mut US_IMR_SPI_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(16usize) as *mut US_IMR_SPI_MODE) }
}
#[doc = "0x10 - Interrupt Mask Register"]
#[inline(always)]
pub fn us_imr_usart_lin_mode(&self) -> &US_IMR_USART_LIN_MODE {
unsafe {
&*(((self as *const Self) as *const u8).add(16usize) as *const US_IMR_USART_LIN_MODE)
}
}
#[doc = "0x10 - Interrupt Mask Register"]
#[inline(always)]
pub fn us_imr_usart_lin_mode_mut(&self) -> &mut US_IMR_USART_LIN_MODE {
unsafe {
&mut *(((self as *const Self) as *mut u8).add(16usize) as *mut US_IMR_USART_LIN_MODE)
}
}
#[doc = "0x10 - Interrupt Mask Register"]
#[inline(always)]
pub fn us_imr_usart_mode(&self) -> &US_IMR_USART_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(16usize) as *const US_IMR_USART_MODE) }
}
#[doc = "0x10 - Interrupt Mask Register"]
#[inline(always)]
pub fn us_imr_usart_mode_mut(&self) -> &mut US_IMR_USART_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(16usize) as *mut US_IMR_USART_MODE) }
}
#[doc = "0x14 - Channel Status Register"]
#[inline(always)]
pub fn us_csr_lon_spi_mode(&self) -> &US_CSR_LON_SPI_MODE {
unsafe {
&*(((self as *const Self) as *const u8).add(20usize) as *const US_CSR_LON_SPI_MODE)
}
}
#[doc = "0x14 - Channel Status Register"]
#[inline(always)]
pub fn us_csr_lon_spi_mode_mut(&self) -> &mut US_CSR_LON_SPI_MODE {
unsafe {
&mut *(((self as *const Self) as *mut u8).add(20usize) as *mut US_CSR_LON_SPI_MODE)
}
}
#[doc = "0x14 - Channel Status Register"]
#[inline(always)]
pub fn us_csr_lon_mode(&self) -> &US_CSR_LON_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(20usize) as *const US_CSR_LON_MODE) }
}
#[doc = "0x14 - Channel Status Register"]
#[inline(always)]
pub fn us_csr_lon_mode_mut(&self) -> &mut US_CSR_LON_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(20usize) as *mut US_CSR_LON_MODE) }
}
#[doc = "0x14 - Channel Status Register"]
#[inline(always)]
pub fn us_csr_lin_mode(&self) -> &US_CSR_LIN_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(20usize) as *const US_CSR_LIN_MODE) }
}
#[doc = "0x14 - Channel Status Register"]
#[inline(always)]
pub fn us_csr_lin_mode_mut(&self) -> &mut US_CSR_LIN_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(20usize) as *mut US_CSR_LIN_MODE) }
}
#[doc = "0x14 - Channel Status Register"]
#[inline(always)]
pub fn us_csr_spi_mode(&self) -> &US_CSR_SPI_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(20usize) as *const US_CSR_SPI_MODE) }
}
#[doc = "0x14 - Channel Status Register"]
#[inline(always)]
pub fn us_csr_spi_mode_mut(&self) -> &mut US_CSR_SPI_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(20usize) as *mut US_CSR_SPI_MODE) }
}
#[doc = "0x14 - Channel Status Register"]
#[inline(always)]
pub fn us_csr_usart_lin_mode(&self) -> &US_CSR_USART_LIN_MODE {
unsafe {
&*(((self as *const Self) as *const u8).add(20usize) as *const US_CSR_USART_LIN_MODE)
}
}
#[doc = "0x14 - Channel Status Register"]
#[inline(always)]
pub fn us_csr_usart_lin_mode_mut(&self) -> &mut US_CSR_USART_LIN_MODE {
unsafe {
&mut *(((self as *const Self) as *mut u8).add(20usize) as *mut US_CSR_USART_LIN_MODE)
}
}
#[doc = "0x14 - Channel Status Register"]
#[inline(always)]
pub fn us_csr_usart_mode(&self) -> &US_CSR_USART_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(20usize) as *const US_CSR_USART_MODE) }
}
#[doc = "0x14 - Channel Status Register"]
#[inline(always)]
pub fn us_csr_usart_mode_mut(&self) -> &mut US_CSR_USART_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(20usize) as *mut US_CSR_USART_MODE) }
}
#[doc = "0x28 - Transmitter Timeguard Register"]
#[inline(always)]
pub fn us_ttgr_lon_mode(&self) -> &US_TTGR_LON_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(40usize) as *const US_TTGR_LON_MODE) }
}
#[doc = "0x28 - Transmitter Timeguard Register"]
#[inline(always)]
pub fn us_ttgr_lon_mode_mut(&self) -> &mut US_TTGR_LON_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(40usize) as *mut US_TTGR_LON_MODE) }
}
#[doc = "0x28 - Transmitter Timeguard Register"]
#[inline(always)]
pub fn us_ttgr_usart_mode(&self) -> &US_TTGR_USART_MODE {
unsafe {
&*(((self as *const Self) as *const u8).add(40usize) as *const US_TTGR_USART_MODE)
}
}
#[doc = "0x28 - Transmitter Timeguard Register"]
#[inline(always)]
pub fn us_ttgr_usart_mode_mut(&self) -> &mut US_TTGR_USART_MODE {
unsafe {
&mut *(((self as *const Self) as *mut u8).add(40usize) as *mut US_TTGR_USART_MODE)
}
}
#[doc = "0x40 - FI DI Ratio Register"]
#[inline(always)]
pub fn us_fidi_lon_mode(&self) -> &US_FIDI_LON_MODE {
unsafe { &*(((self as *const Self) as *const u8).add(64usize) as *const US_FIDI_LON_MODE) }
}
#[doc = "0x40 - FI DI Ratio Register"]
#[inline(always)]
pub fn us_fidi_lon_mode_mut(&self) -> &mut US_FIDI_LON_MODE {
unsafe { &mut *(((self as *const Self) as *mut u8).add(64usize) as *mut US_FIDI_LON_MODE) }
}
#[doc = "0x40 - FI DI Ratio Register"]
#[inline(always)]
pub fn us_fidi_usart_mode(&self) -> &US_FIDI_USART_MODE {
unsafe {
&*(((self as *const Self) as *const u8).add(64usize) as *const US_FIDI_USART_MODE)
}
}
#[doc = "0x40 - FI DI Ratio Register"]
#[inline(always)]
pub fn us_fidi_usart_mode_mut(&self) -> &mut US_FIDI_USART_MODE {
unsafe {
&mut *(((self as *const Self) as *mut u8).add(64usize) as *mut US_FIDI_USART_MODE)
}
}
}
#[doc = "Control Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_cr_usart_mode](us_cr_usart_mode) module"]
pub type US_CR_USART_MODE = crate::Reg<u32, _US_CR_USART_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_CR_USART_MODE;
#[doc = "`write(|w| ..)` method takes [us_cr_usart_mode::W](us_cr_usart_mode::W) writer structure"]
impl crate::Writable for US_CR_USART_MODE {}
#[doc = "Control Register"]
pub mod us_cr_usart_mode;
#[doc = "Control Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_cr_spi_mode](us_cr_spi_mode) module"]
pub type US_CR_SPI_MODE = crate::Reg<u32, _US_CR_SPI_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_CR_SPI_MODE;
#[doc = "`write(|w| ..)` method takes [us_cr_spi_mode::W](us_cr_spi_mode::W) writer structure"]
impl crate::Writable for US_CR_SPI_MODE {}
#[doc = "Control Register"]
pub mod us_cr_spi_mode;
#[doc = "Control Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_cr_lin_mode](us_cr_lin_mode) module"]
pub type US_CR_LIN_MODE = crate::Reg<u32, _US_CR_LIN_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_CR_LIN_MODE;
#[doc = "`write(|w| ..)` method takes [us_cr_lin_mode::W](us_cr_lin_mode::W) writer structure"]
impl crate::Writable for US_CR_LIN_MODE {}
#[doc = "Control Register"]
pub mod us_cr_lin_mode;
#[doc = "Mode Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_mr_usart_mode](us_mr_usart_mode) module"]
pub type US_MR_USART_MODE = crate::Reg<u32, _US_MR_USART_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_MR_USART_MODE;
#[doc = "`read()` method returns [us_mr_usart_mode::R](us_mr_usart_mode::R) reader structure"]
impl crate::Readable for US_MR_USART_MODE {}
#[doc = "`write(|w| ..)` method takes [us_mr_usart_mode::W](us_mr_usart_mode::W) writer structure"]
impl crate::Writable for US_MR_USART_MODE {}
#[doc = "Mode Register"]
pub mod us_mr_usart_mode;
#[doc = "Mode Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_mr_spi_mode](us_mr_spi_mode) module"]
pub type US_MR_SPI_MODE = crate::Reg<u32, _US_MR_SPI_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_MR_SPI_MODE;
#[doc = "`read()` method returns [us_mr_spi_mode::R](us_mr_spi_mode::R) reader structure"]
impl crate::Readable for US_MR_SPI_MODE {}
#[doc = "`write(|w| ..)` method takes [us_mr_spi_mode::W](us_mr_spi_mode::W) writer structure"]
impl crate::Writable for US_MR_SPI_MODE {}
#[doc = "Mode Register"]
pub mod us_mr_spi_mode;
#[doc = "Interrupt Enable Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_ier_usart_mode](us_ier_usart_mode) module"]
pub type US_IER_USART_MODE = crate::Reg<u32, _US_IER_USART_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IER_USART_MODE;
#[doc = "`write(|w| ..)` method takes [us_ier_usart_mode::W](us_ier_usart_mode::W) writer structure"]
impl crate::Writable for US_IER_USART_MODE {}
#[doc = "Interrupt Enable Register"]
pub mod us_ier_usart_mode;
#[doc = "Interrupt Enable Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_ier_usart_lin_mode](us_ier_usart_lin_mode) module"]
pub type US_IER_USART_LIN_MODE = crate::Reg<u32, _US_IER_USART_LIN_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IER_USART_LIN_MODE;
#[doc = "`write(|w| ..)` method takes [us_ier_usart_lin_mode::W](us_ier_usart_lin_mode::W) writer structure"]
impl crate::Writable for US_IER_USART_LIN_MODE {}
#[doc = "Interrupt Enable Register"]
pub mod us_ier_usart_lin_mode;
#[doc = "Interrupt Enable Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_ier_spi_mode](us_ier_spi_mode) module"]
pub type US_IER_SPI_MODE = crate::Reg<u32, _US_IER_SPI_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IER_SPI_MODE;
#[doc = "`write(|w| ..)` method takes [us_ier_spi_mode::W](us_ier_spi_mode::W) writer structure"]
impl crate::Writable for US_IER_SPI_MODE {}
#[doc = "Interrupt Enable Register"]
pub mod us_ier_spi_mode;
#[doc = "Interrupt Enable Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_ier_lin_mode](us_ier_lin_mode) module"]
pub type US_IER_LIN_MODE = crate::Reg<u32, _US_IER_LIN_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IER_LIN_MODE;
#[doc = "`write(|w| ..)` method takes [us_ier_lin_mode::W](us_ier_lin_mode::W) writer structure"]
impl crate::Writable for US_IER_LIN_MODE {}
#[doc = "Interrupt Enable Register"]
pub mod us_ier_lin_mode;
#[doc = "Interrupt Enable Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_ier_lon_mode](us_ier_lon_mode) module"]
pub type US_IER_LON_MODE = crate::Reg<u32, _US_IER_LON_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IER_LON_MODE;
#[doc = "`write(|w| ..)` method takes [us_ier_lon_mode::W](us_ier_lon_mode::W) writer structure"]
impl crate::Writable for US_IER_LON_MODE {}
#[doc = "Interrupt Enable Register"]
pub mod us_ier_lon_mode;
#[doc = "Interrupt Enable Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_ier_lon_spi_mode](us_ier_lon_spi_mode) module"]
pub type US_IER_LON_SPI_MODE = crate::Reg<u32, _US_IER_LON_SPI_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IER_LON_SPI_MODE;
#[doc = "`write(|w| ..)` method takes [us_ier_lon_spi_mode::W](us_ier_lon_spi_mode::W) writer structure"]
impl crate::Writable for US_IER_LON_SPI_MODE {}
#[doc = "Interrupt Enable Register"]
pub mod us_ier_lon_spi_mode;
#[doc = "Interrupt Disable Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_idr_usart_mode](us_idr_usart_mode) module"]
pub type US_IDR_USART_MODE = crate::Reg<u32, _US_IDR_USART_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IDR_USART_MODE;
#[doc = "`write(|w| ..)` method takes [us_idr_usart_mode::W](us_idr_usart_mode::W) writer structure"]
impl crate::Writable for US_IDR_USART_MODE {}
#[doc = "Interrupt Disable Register"]
pub mod us_idr_usart_mode;
#[doc = "Interrupt Disable Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_idr_usart_lin_mode](us_idr_usart_lin_mode) module"]
pub type US_IDR_USART_LIN_MODE = crate::Reg<u32, _US_IDR_USART_LIN_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IDR_USART_LIN_MODE;
#[doc = "`write(|w| ..)` method takes [us_idr_usart_lin_mode::W](us_idr_usart_lin_mode::W) writer structure"]
impl crate::Writable for US_IDR_USART_LIN_MODE {}
#[doc = "Interrupt Disable Register"]
pub mod us_idr_usart_lin_mode;
#[doc = "Interrupt Disable Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_idr_spi_mode](us_idr_spi_mode) module"]
pub type US_IDR_SPI_MODE = crate::Reg<u32, _US_IDR_SPI_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IDR_SPI_MODE;
#[doc = "`write(|w| ..)` method takes [us_idr_spi_mode::W](us_idr_spi_mode::W) writer structure"]
impl crate::Writable for US_IDR_SPI_MODE {}
#[doc = "Interrupt Disable Register"]
pub mod us_idr_spi_mode;
#[doc = "Interrupt Disable Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_idr_lin_mode](us_idr_lin_mode) module"]
pub type US_IDR_LIN_MODE = crate::Reg<u32, _US_IDR_LIN_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IDR_LIN_MODE;
#[doc = "`write(|w| ..)` method takes [us_idr_lin_mode::W](us_idr_lin_mode::W) writer structure"]
impl crate::Writable for US_IDR_LIN_MODE {}
#[doc = "Interrupt Disable Register"]
pub mod us_idr_lin_mode;
#[doc = "Interrupt Disable Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_idr_lon_mode](us_idr_lon_mode) module"]
pub type US_IDR_LON_MODE = crate::Reg<u32, _US_IDR_LON_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IDR_LON_MODE;
#[doc = "`write(|w| ..)` method takes [us_idr_lon_mode::W](us_idr_lon_mode::W) writer structure"]
impl crate::Writable for US_IDR_LON_MODE {}
#[doc = "Interrupt Disable Register"]
pub mod us_idr_lon_mode;
#[doc = "Interrupt Disable Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_idr_lon_spi_mode](us_idr_lon_spi_mode) module"]
pub type US_IDR_LON_SPI_MODE = crate::Reg<u32, _US_IDR_LON_SPI_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IDR_LON_SPI_MODE;
#[doc = "`write(|w| ..)` method takes [us_idr_lon_spi_mode::W](us_idr_lon_spi_mode::W) writer structure"]
impl crate::Writable for US_IDR_LON_SPI_MODE {}
#[doc = "Interrupt Disable Register"]
pub mod us_idr_lon_spi_mode;
#[doc = "Interrupt Mask Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_imr_usart_mode](us_imr_usart_mode) module"]
pub type US_IMR_USART_MODE = crate::Reg<u32, _US_IMR_USART_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IMR_USART_MODE;
#[doc = "`read()` method returns [us_imr_usart_mode::R](us_imr_usart_mode::R) reader structure"]
impl crate::Readable for US_IMR_USART_MODE {}
#[doc = "Interrupt Mask Register"]
pub mod us_imr_usart_mode;
#[doc = "Interrupt Mask Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_imr_usart_lin_mode](us_imr_usart_lin_mode) module"]
pub type US_IMR_USART_LIN_MODE = crate::Reg<u32, _US_IMR_USART_LIN_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IMR_USART_LIN_MODE;
#[doc = "`read()` method returns [us_imr_usart_lin_mode::R](us_imr_usart_lin_mode::R) reader structure"]
impl crate::Readable for US_IMR_USART_LIN_MODE {}
#[doc = "Interrupt Mask Register"]
pub mod us_imr_usart_lin_mode;
#[doc = "Interrupt Mask Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_imr_spi_mode](us_imr_spi_mode) module"]
pub type US_IMR_SPI_MODE = crate::Reg<u32, _US_IMR_SPI_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IMR_SPI_MODE;
#[doc = "`read()` method returns [us_imr_spi_mode::R](us_imr_spi_mode::R) reader structure"]
impl crate::Readable for US_IMR_SPI_MODE {}
#[doc = "Interrupt Mask Register"]
pub mod us_imr_spi_mode;
#[doc = "Interrupt Mask Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_imr_lin_mode](us_imr_lin_mode) module"]
pub type US_IMR_LIN_MODE = crate::Reg<u32, _US_IMR_LIN_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IMR_LIN_MODE;
#[doc = "`read()` method returns [us_imr_lin_mode::R](us_imr_lin_mode::R) reader structure"]
impl crate::Readable for US_IMR_LIN_MODE {}
#[doc = "Interrupt Mask Register"]
pub mod us_imr_lin_mode;
#[doc = "Interrupt Mask Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_imr_lon_mode](us_imr_lon_mode) module"]
pub type US_IMR_LON_MODE = crate::Reg<u32, _US_IMR_LON_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IMR_LON_MODE;
#[doc = "`read()` method returns [us_imr_lon_mode::R](us_imr_lon_mode::R) reader structure"]
impl crate::Readable for US_IMR_LON_MODE {}
#[doc = "Interrupt Mask Register"]
pub mod us_imr_lon_mode;
#[doc = "Interrupt Mask Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_imr_lon_spi_mode](us_imr_lon_spi_mode) module"]
pub type US_IMR_LON_SPI_MODE = crate::Reg<u32, _US_IMR_LON_SPI_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IMR_LON_SPI_MODE;
#[doc = "`read()` method returns [us_imr_lon_spi_mode::R](us_imr_lon_spi_mode::R) reader structure"]
impl crate::Readable for US_IMR_LON_SPI_MODE {}
#[doc = "Interrupt Mask Register"]
pub mod us_imr_lon_spi_mode;
#[doc = "Channel Status Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_csr_usart_mode](us_csr_usart_mode) module"]
pub type US_CSR_USART_MODE = crate::Reg<u32, _US_CSR_USART_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_CSR_USART_MODE;
#[doc = "`read()` method returns [us_csr_usart_mode::R](us_csr_usart_mode::R) reader structure"]
impl crate::Readable for US_CSR_USART_MODE {}
#[doc = "Channel Status Register"]
pub mod us_csr_usart_mode;
#[doc = "Channel Status Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_csr_usart_lin_mode](us_csr_usart_lin_mode) module"]
pub type US_CSR_USART_LIN_MODE = crate::Reg<u32, _US_CSR_USART_LIN_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_CSR_USART_LIN_MODE;
#[doc = "`read()` method returns [us_csr_usart_lin_mode::R](us_csr_usart_lin_mode::R) reader structure"]
impl crate::Readable for US_CSR_USART_LIN_MODE {}
#[doc = "Channel Status Register"]
pub mod us_csr_usart_lin_mode;
#[doc = "Channel Status Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_csr_spi_mode](us_csr_spi_mode) module"]
pub type US_CSR_SPI_MODE = crate::Reg<u32, _US_CSR_SPI_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_CSR_SPI_MODE;
#[doc = "`read()` method returns [us_csr_spi_mode::R](us_csr_spi_mode::R) reader structure"]
impl crate::Readable for US_CSR_SPI_MODE {}
#[doc = "Channel Status Register"]
pub mod us_csr_spi_mode;
#[doc = "Channel Status Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_csr_lin_mode](us_csr_lin_mode) module"]
pub type US_CSR_LIN_MODE = crate::Reg<u32, _US_CSR_LIN_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_CSR_LIN_MODE;
#[doc = "`read()` method returns [us_csr_lin_mode::R](us_csr_lin_mode::R) reader structure"]
impl crate::Readable for US_CSR_LIN_MODE {}
#[doc = "Channel Status Register"]
pub mod us_csr_lin_mode;
#[doc = "Channel Status Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_csr_lon_mode](us_csr_lon_mode) module"]
pub type US_CSR_LON_MODE = crate::Reg<u32, _US_CSR_LON_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_CSR_LON_MODE;
#[doc = "`read()` method returns [us_csr_lon_mode::R](us_csr_lon_mode::R) reader structure"]
impl crate::Readable for US_CSR_LON_MODE {}
#[doc = "Channel Status Register"]
pub mod us_csr_lon_mode;
#[doc = "Channel Status Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_csr_lon_spi_mode](us_csr_lon_spi_mode) module"]
pub type US_CSR_LON_SPI_MODE = crate::Reg<u32, _US_CSR_LON_SPI_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_CSR_LON_SPI_MODE;
#[doc = "`read()` method returns [us_csr_lon_spi_mode::R](us_csr_lon_spi_mode::R) reader structure"]
impl crate::Readable for US_CSR_LON_SPI_MODE {}
#[doc = "Channel Status Register"]
pub mod us_csr_lon_spi_mode;
#[doc = "Receive Holding Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_rhr](us_rhr) module"]
pub type US_RHR = crate::Reg<u32, _US_RHR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_RHR;
#[doc = "`read()` method returns [us_rhr::R](us_rhr::R) reader structure"]
impl crate::Readable for US_RHR {}
#[doc = "Receive Holding Register"]
pub mod us_rhr;
#[doc = "Transmit Holding Register\n\nThis register you can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_thr](us_thr) module"]
pub type US_THR = crate::Reg<u32, _US_THR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_THR;
#[doc = "`write(|w| ..)` method takes [us_thr::W](us_thr::W) writer structure"]
impl crate::Writable for US_THR {}
#[doc = "Transmit Holding Register"]
pub mod us_thr;
#[doc = "Baud Rate Generator Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_brgr](us_brgr) module"]
pub type US_BRGR = crate::Reg<u32, _US_BRGR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_BRGR;
#[doc = "`read()` method returns [us_brgr::R](us_brgr::R) reader structure"]
impl crate::Readable for US_BRGR {}
#[doc = "`write(|w| ..)` method takes [us_brgr::W](us_brgr::W) writer structure"]
impl crate::Writable for US_BRGR {}
#[doc = "Baud Rate Generator Register"]
pub mod us_brgr;
#[doc = "Receiver Timeout Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_rtor](us_rtor) module"]
pub type US_RTOR = crate::Reg<u32, _US_RTOR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_RTOR;
#[doc = "`read()` method returns [us_rtor::R](us_rtor::R) reader structure"]
impl crate::Readable for US_RTOR {}
#[doc = "`write(|w| ..)` method takes [us_rtor::W](us_rtor::W) writer structure"]
impl crate::Writable for US_RTOR {}
#[doc = "Receiver Timeout Register"]
pub mod us_rtor;
#[doc = "Transmitter Timeguard Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_ttgr_usart_mode](us_ttgr_usart_mode) module"]
pub type US_TTGR_USART_MODE = crate::Reg<u32, _US_TTGR_USART_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_TTGR_USART_MODE;
#[doc = "`read()` method returns [us_ttgr_usart_mode::R](us_ttgr_usart_mode::R) reader structure"]
impl crate::Readable for US_TTGR_USART_MODE {}
#[doc = "`write(|w| ..)` method takes [us_ttgr_usart_mode::W](us_ttgr_usart_mode::W) writer structure"]
impl crate::Writable for US_TTGR_USART_MODE {}
#[doc = "Transmitter Timeguard Register"]
pub mod us_ttgr_usart_mode;
#[doc = "Transmitter Timeguard Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_ttgr_lon_mode](us_ttgr_lon_mode) module"]
pub type US_TTGR_LON_MODE = crate::Reg<u32, _US_TTGR_LON_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_TTGR_LON_MODE;
#[doc = "`read()` method returns [us_ttgr_lon_mode::R](us_ttgr_lon_mode::R) reader structure"]
impl crate::Readable for US_TTGR_LON_MODE {}
#[doc = "`write(|w| ..)` method takes [us_ttgr_lon_mode::W](us_ttgr_lon_mode::W) writer structure"]
impl crate::Writable for US_TTGR_LON_MODE {}
#[doc = "Transmitter Timeguard Register"]
pub mod us_ttgr_lon_mode;
#[doc = "FI DI Ratio Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_fidi_usart_mode](us_fidi_usart_mode) module"]
pub type US_FIDI_USART_MODE = crate::Reg<u32, _US_FIDI_USART_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_FIDI_USART_MODE;
#[doc = "`read()` method returns [us_fidi_usart_mode::R](us_fidi_usart_mode::R) reader structure"]
impl crate::Readable for US_FIDI_USART_MODE {}
#[doc = "`write(|w| ..)` method takes [us_fidi_usart_mode::W](us_fidi_usart_mode::W) writer structure"]
impl crate::Writable for US_FIDI_USART_MODE {}
#[doc = "FI DI Ratio Register"]
pub mod us_fidi_usart_mode;
#[doc = "FI DI Ratio Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_fidi_lon_mode](us_fidi_lon_mode) module"]
pub type US_FIDI_LON_MODE = crate::Reg<u32, _US_FIDI_LON_MODE>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_FIDI_LON_MODE;
#[doc = "`read()` method returns [us_fidi_lon_mode::R](us_fidi_lon_mode::R) reader structure"]
impl crate::Readable for US_FIDI_LON_MODE {}
#[doc = "`write(|w| ..)` method takes [us_fidi_lon_mode::W](us_fidi_lon_mode::W) writer structure"]
impl crate::Writable for US_FIDI_LON_MODE {}
#[doc = "FI DI Ratio Register"]
pub mod us_fidi_lon_mode;
#[doc = "Number of Errors Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_ner](us_ner) module"]
pub type US_NER = crate::Reg<u32, _US_NER>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_NER;
#[doc = "`read()` method returns [us_ner::R](us_ner::R) reader structure"]
impl crate::Readable for US_NER {}
#[doc = "Number of Errors Register"]
pub mod us_ner;
#[doc = "IrDA Filter Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_if](us_if) module"]
pub type US_IF = crate::Reg<u32, _US_IF>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IF;
#[doc = "`read()` method returns [us_if::R](us_if::R) reader structure"]
impl crate::Readable for US_IF {}
#[doc = "`write(|w| ..)` method takes [us_if::W](us_if::W) writer structure"]
impl crate::Writable for US_IF {}
#[doc = "IrDA Filter Register"]
pub mod us_if;
#[doc = "Manchester Configuration Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_man](us_man) module"]
pub type US_MAN = crate::Reg<u32, _US_MAN>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_MAN;
#[doc = "`read()` method returns [us_man::R](us_man::R) reader structure"]
impl crate::Readable for US_MAN {}
#[doc = "`write(|w| ..)` method takes [us_man::W](us_man::W) writer structure"]
impl crate::Writable for US_MAN {}
#[doc = "Manchester Configuration Register"]
pub mod us_man;
#[doc = "LIN Mode Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_linmr](us_linmr) module"]
pub type US_LINMR = crate::Reg<u32, _US_LINMR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_LINMR;
#[doc = "`read()` method returns [us_linmr::R](us_linmr::R) reader structure"]
impl crate::Readable for US_LINMR {}
#[doc = "`write(|w| ..)` method takes [us_linmr::W](us_linmr::W) writer structure"]
impl crate::Writable for US_LINMR {}
#[doc = "LIN Mode Register"]
pub mod us_linmr;
#[doc = "LIN Identifier Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_linir](us_linir) module"]
pub type US_LINIR = crate::Reg<u32, _US_LINIR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_LINIR;
#[doc = "`read()` method returns [us_linir::R](us_linir::R) reader structure"]
impl crate::Readable for US_LINIR {}
#[doc = "`write(|w| ..)` method takes [us_linir::W](us_linir::W) writer structure"]
impl crate::Writable for US_LINIR {}
#[doc = "LIN Identifier Register"]
pub mod us_linir;
#[doc = "LIN Baud Rate Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_linbrr](us_linbrr) module"]
pub type US_LINBRR = crate::Reg<u32, _US_LINBRR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_LINBRR;
#[doc = "`read()` method returns [us_linbrr::R](us_linbrr::R) reader structure"]
impl crate::Readable for US_LINBRR {}
#[doc = "LIN Baud Rate Register"]
pub mod us_linbrr;
#[doc = "LON Mode Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_lonmr](us_lonmr) module"]
pub type US_LONMR = crate::Reg<u32, _US_LONMR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_LONMR;
#[doc = "`read()` method returns [us_lonmr::R](us_lonmr::R) reader structure"]
impl crate::Readable for US_LONMR {}
#[doc = "`write(|w| ..)` method takes [us_lonmr::W](us_lonmr::W) writer structure"]
impl crate::Writable for US_LONMR {}
#[doc = "LON Mode Register"]
pub mod us_lonmr;
#[doc = "LON Preamble Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_lonpr](us_lonpr) module"]
pub type US_LONPR = crate::Reg<u32, _US_LONPR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_LONPR;
#[doc = "`read()` method returns [us_lonpr::R](us_lonpr::R) reader structure"]
impl crate::Readable for US_LONPR {}
#[doc = "`write(|w| ..)` method takes [us_lonpr::W](us_lonpr::W) writer structure"]
impl crate::Writable for US_LONPR {}
#[doc = "LON Preamble Register"]
pub mod us_lonpr;
#[doc = "LON Data Length Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_londl](us_londl) module"]
pub type US_LONDL = crate::Reg<u32, _US_LONDL>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_LONDL;
#[doc = "`read()` method returns [us_londl::R](us_londl::R) reader structure"]
impl crate::Readable for US_LONDL {}
#[doc = "`write(|w| ..)` method takes [us_londl::W](us_londl::W) writer structure"]
impl crate::Writable for US_LONDL {}
#[doc = "LON Data Length Register"]
pub mod us_londl;
#[doc = "LON L2HDR Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_lonl2hdr](us_lonl2hdr) module"]
pub type US_LONL2HDR = crate::Reg<u32, _US_LONL2HDR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_LONL2HDR;
#[doc = "`read()` method returns [us_lonl2hdr::R](us_lonl2hdr::R) reader structure"]
impl crate::Readable for US_LONL2HDR {}
#[doc = "`write(|w| ..)` method takes [us_lonl2hdr::W](us_lonl2hdr::W) writer structure"]
impl crate::Writable for US_LONL2HDR {}
#[doc = "LON L2HDR Register"]
pub mod us_lonl2hdr;
#[doc = "LON Backlog Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_lonbl](us_lonbl) module"]
pub type US_LONBL = crate::Reg<u32, _US_LONBL>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_LONBL;
#[doc = "`read()` method returns [us_lonbl::R](us_lonbl::R) reader structure"]
impl crate::Readable for US_LONBL {}
#[doc = "LON Backlog Register"]
pub mod us_lonbl;
#[doc = "LON Beta1 Tx Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_lonb1tx](us_lonb1tx) module"]
pub type US_LONB1TX = crate::Reg<u32, _US_LONB1TX>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_LONB1TX;
#[doc = "`read()` method returns [us_lonb1tx::R](us_lonb1tx::R) reader structure"]
impl crate::Readable for US_LONB1TX {}
#[doc = "`write(|w| ..)` method takes [us_lonb1tx::W](us_lonb1tx::W) writer structure"]
impl crate::Writable for US_LONB1TX {}
#[doc = "LON Beta1 Tx Register"]
pub mod us_lonb1tx;
#[doc = "LON Beta1 Rx Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_lonb1rx](us_lonb1rx) module"]
pub type US_LONB1RX = crate::Reg<u32, _US_LONB1RX>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_LONB1RX;
#[doc = "`read()` method returns [us_lonb1rx::R](us_lonb1rx::R) reader structure"]
impl crate::Readable for US_LONB1RX {}
#[doc = "`write(|w| ..)` method takes [us_lonb1rx::W](us_lonb1rx::W) writer structure"]
impl crate::Writable for US_LONB1RX {}
#[doc = "LON Beta1 Rx Register"]
pub mod us_lonb1rx;
#[doc = "LON Priority Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_lonprio](us_lonprio) module"]
pub type US_LONPRIO = crate::Reg<u32, _US_LONPRIO>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_LONPRIO;
#[doc = "`read()` method returns [us_lonprio::R](us_lonprio::R) reader structure"]
impl crate::Readable for US_LONPRIO {}
#[doc = "`write(|w| ..)` method takes [us_lonprio::W](us_lonprio::W) writer structure"]
impl crate::Writable for US_LONPRIO {}
#[doc = "LON Priority Register"]
pub mod us_lonprio;
#[doc = "LON IDT Tx Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_idttx](us_idttx) module"]
pub type US_IDTTX = crate::Reg<u32, _US_IDTTX>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IDTTX;
#[doc = "`read()` method returns [us_idttx::R](us_idttx::R) reader structure"]
impl crate::Readable for US_IDTTX {}
#[doc = "`write(|w| ..)` method takes [us_idttx::W](us_idttx::W) writer structure"]
impl crate::Writable for US_IDTTX {}
#[doc = "LON IDT Tx Register"]
pub mod us_idttx;
#[doc = "LON IDT Rx Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_idtrx](us_idtrx) module"]
pub type US_IDTRX = crate::Reg<u32, _US_IDTRX>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_IDTRX;
#[doc = "`read()` method returns [us_idtrx::R](us_idtrx::R) reader structure"]
impl crate::Readable for US_IDTRX {}
#[doc = "`write(|w| ..)` method takes [us_idtrx::W](us_idtrx::W) writer structure"]
impl crate::Writable for US_IDTRX {}
#[doc = "LON IDT Rx Register"]
pub mod us_idtrx;
#[doc = "IC DIFF Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_icdiff](us_icdiff) module"]
pub type US_ICDIFF = crate::Reg<u32, _US_ICDIFF>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_ICDIFF;
#[doc = "`read()` method returns [us_icdiff::R](us_icdiff::R) reader structure"]
impl crate::Readable for US_ICDIFF {}
#[doc = "`write(|w| ..)` method takes [us_icdiff::W](us_icdiff::W) writer structure"]
impl crate::Writable for US_ICDIFF {}
#[doc = "IC DIFF Register"]
pub mod us_icdiff;
#[doc = "Write Protection Mode Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_wpmr](us_wpmr) module"]
pub type US_WPMR = crate::Reg<u32, _US_WPMR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_WPMR;
#[doc = "`read()` method returns [us_wpmr::R](us_wpmr::R) reader structure"]
impl crate::Readable for US_WPMR {}
#[doc = "`write(|w| ..)` method takes [us_wpmr::W](us_wpmr::W) writer structure"]
impl crate::Writable for US_WPMR {}
#[doc = "Write Protection Mode Register"]
pub mod us_wpmr;
#[doc = "Write Protection Status Register\n\nThis register you can [`read`](crate::generic::Reg::read). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [us_wpsr](us_wpsr) module"]
pub type US_WPSR = crate::Reg<u32, _US_WPSR>;
#[allow(missing_docs)]
#[doc(hidden)]
pub struct _US_WPSR;
#[doc = "`read()` method returns [us_wpsr::R](us_wpsr::R) reader structure"]
impl crate::Readable for US_WPSR {}
#[doc = "Write Protection Status Register"]
pub mod us_wpsr;