Struct atsame54p19a_pac::nvmctrl::ctrlb::CMD_W [−][src]
Write proxy for field CMD
Implementations
impl<'a> CMD_W<'a>
[src]
pub fn variant(self, variant: CMD_AW) -> &'a mut W
[src]
Writes variant
to the field
pub fn ep(self) -> &'a mut W
[src]
Erase Page - Only supported in the USER and AUX pages.
pub fn eb(self) -> &'a mut W
[src]
Erase Block - Erases the block addressed by the ADDR register, not supported in the user page
pub fn wp(self) -> &'a mut W
[src]
Write Page - Writes the contents of the page buffer to the page addressed by the ADDR register, not supported in the user page
pub fn wqw(self) -> &'a mut W
[src]
Write Quad Word - Writes a 128-bit word at the location addressed by the ADDR register.
pub fn swrst(self) -> &'a mut W
[src]
Software Reset - Power-Cycle the NVM memory and replay the device automatic calibration procedure and resets the module configuration registers
pub fn lr(self) -> &'a mut W
[src]
Lock Region - Locks the region containing the address location in the ADDR register.
pub fn ur(self) -> &'a mut W
[src]
Unlock Region - Unlocks the region containing the address location in the ADDR register.
pub fn sprm(self) -> &'a mut W
[src]
Sets the power reduction mode.
pub fn cprm(self) -> &'a mut W
[src]
Clears the power reduction mode.
pub fn pbc(self) -> &'a mut W
[src]
Page Buffer Clear - Clears the page buffer.
pub fn ssb(self) -> &'a mut W
[src]
Set Security Bit
pub fn bkswrst(self) -> &'a mut W
[src]
Bank swap and system reset, if SMEE is used also reallocate SMEE data into the opposite BANK
pub fn celck(self) -> &'a mut W
[src]
Chip Erase Lock - DSU.CE command is not available
pub fn ceulck(self) -> &'a mut W
[src]
Chip Erase Unlock - DSU.CE command is available
pub fn sbpdis(self) -> &'a mut W
[src]
Sets STATUS.BPDIS, Boot loader protection is discarded until CBPDIS is issued or next start-up sequence
pub fn cbpdis(self) -> &'a mut W
[src]
Clears STATUS.BPDIS, Boot loader protection is not discarded
pub fn asees0(self) -> &'a mut W
[src]
Activate SmartEEPROM Sector 0, deactivate Sector 1
pub fn asees1(self) -> &'a mut W
[src]
Activate SmartEEPROM Sector 1, deactivate Sector 0
pub fn seeraloc(self) -> &'a mut W
[src]
Starts SmartEEPROM sector reallocation algorithm
pub fn seeflush(self) -> &'a mut W
[src]
Flush SMEE data when in buffered mode
pub fn lsee(self) -> &'a mut W
[src]
Lock access to SmartEEPROM data from any mean
pub fn usee(self) -> &'a mut W
[src]
Unlock access to SmartEEPROM data
pub fn lseer(self) -> &'a mut W
[src]
Lock access to the SmartEEPROM Register Address Space (above 64KB)
pub fn useer(self) -> &'a mut W
[src]
Unlock access to the SmartEEPROM Register Address Space (above 64KB)
pub unsafe fn bits(self, value: u8) -> &'a mut W
[src]
Writes raw bits to the field
Auto Trait Implementations
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
pub fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
pub fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,