#[doc = r"Register block"]
#[repr(C)]
pub struct I2CM {
#[doc = "0x00 - I2CM Control A"]
pub ctrla: CTRLA,
#[doc = "0x04 - I2CM Control B"]
pub ctrlb: CTRLB,
#[doc = "0x08 - I2CM Control C"]
pub ctrlc: CTRLC,
#[doc = "0x0c - I2CM Baud Rate"]
pub baud: BAUD,
_reserved4: [u8; 0x04],
#[doc = "0x14 - I2CM Interrupt Enable Clear"]
pub intenclr: INTENCLR,
_reserved5: [u8; 0x01],
#[doc = "0x16 - I2CM Interrupt Enable Set"]
pub intenset: INTENSET,
_reserved6: [u8; 0x01],
#[doc = "0x18 - I2CM Interrupt Flag Status and Clear"]
pub intflag: INTFLAG,
_reserved7: [u8; 0x01],
#[doc = "0x1a - I2CM Status"]
pub status: STATUS,
#[doc = "0x1c - I2CM Synchronization Busy"]
pub syncbusy: SYNCBUSY,
_reserved9: [u8; 0x04],
#[doc = "0x24 - I2CM Address"]
pub addr: ADDR,
#[doc = "0x28 - I2CM Data"]
pub data: DATA,
_reserved11: [u8; 0x07],
#[doc = "0x30 - I2CM Debug Control"]
pub dbgctrl: DBGCTRL,
}
#[doc = "CTRLA (rw) register accessor: I2CM Control A\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrla::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrla::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrla`]
module"]
pub type CTRLA = crate::Reg<ctrla::CTRLA_SPEC>;
#[doc = "I2CM Control A"]
pub mod ctrla;
#[doc = "CTRLB (rw) register accessor: I2CM Control B\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrlb::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrlb::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrlb`]
module"]
pub type CTRLB = crate::Reg<ctrlb::CTRLB_SPEC>;
#[doc = "I2CM Control B"]
pub mod ctrlb;
#[doc = "CTRLC (rw) register accessor: I2CM Control C\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrlc::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrlc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrlc`]
module"]
pub type CTRLC = crate::Reg<ctrlc::CTRLC_SPEC>;
#[doc = "I2CM Control C"]
pub mod ctrlc;
#[doc = "BAUD (rw) register accessor: I2CM Baud Rate\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`baud::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`baud::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@baud`]
module"]
pub type BAUD = crate::Reg<baud::BAUD_SPEC>;
#[doc = "I2CM Baud Rate"]
pub mod baud;
#[doc = "INTENCLR (rw) register accessor: I2CM Interrupt Enable Clear\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intenclr::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intenclr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenclr`]
module"]
pub type INTENCLR = crate::Reg<intenclr::INTENCLR_SPEC>;
#[doc = "I2CM Interrupt Enable Clear"]
pub mod intenclr;
#[doc = "INTENSET (rw) register accessor: I2CM Interrupt Enable Set\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intenset::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intenset::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenset`]
module"]
pub type INTENSET = crate::Reg<intenset::INTENSET_SPEC>;
#[doc = "I2CM Interrupt Enable Set"]
pub mod intenset;
#[doc = "INTFLAG (rw) register accessor: I2CM Interrupt Flag Status and Clear\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intflag::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intflag::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intflag`]
module"]
pub type INTFLAG = crate::Reg<intflag::INTFLAG_SPEC>;
#[doc = "I2CM Interrupt Flag Status and Clear"]
pub mod intflag;
#[doc = "STATUS (rw) register accessor: I2CM Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`status::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`status::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
module"]
pub type STATUS = crate::Reg<status::STATUS_SPEC>;
#[doc = "I2CM Status"]
pub mod status;
#[doc = "SYNCBUSY (r) register accessor: I2CM Synchronization Busy\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`syncbusy::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@syncbusy`]
module"]
pub type SYNCBUSY = crate::Reg<syncbusy::SYNCBUSY_SPEC>;
#[doc = "I2CM Synchronization Busy"]
pub mod syncbusy;
#[doc = "ADDR (rw) register accessor: I2CM Address\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`addr::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`addr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@addr`]
module"]
pub type ADDR = crate::Reg<addr::ADDR_SPEC>;
#[doc = "I2CM Address"]
pub mod addr;
#[doc = "DATA (rw) register accessor: I2CM Data\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`data::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`data::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data`]
module"]
pub type DATA = crate::Reg<data::DATA_SPEC>;
#[doc = "I2CM Data"]
pub mod data;
#[doc = "DBGCTRL (rw) register accessor: I2CM Debug Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dbgctrl::R`]. You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dbgctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dbgctrl`]
module"]
pub type DBGCTRL = crate::Reg<dbgctrl::DBGCTRL_SPEC>;
#[doc = "I2CM Debug Control"]
pub mod dbgctrl;