#[doc = "Reader of register NBTP"]
pub type R = crate::R<u32, super::NBTP>;
#[doc = "Writer for register NBTP"]
pub type W = crate::W<u32, super::NBTP>;
#[doc = "Register NBTP `reset()`'s with value 0x0600_0a03"]
impl crate::ResetValue for super::NBTP {
type Type = u32;
#[inline(always)]
fn reset_value() -> Self::Type {
0x0600_0a03
}
}
#[doc = "Reader of field `NTSEG2`"]
pub type NTSEG2_R = crate::R<u8, u8>;
#[doc = "Write proxy for field `NTSEG2`"]
pub struct NTSEG2_W<'a> {
w: &'a mut W,
}
impl<'a> NTSEG2_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !0x7f) | ((value as u32) & 0x7f);
self.w
}
}
#[doc = "Reader of field `NTSEG1`"]
pub type NTSEG1_R = crate::R<u8, u8>;
#[doc = "Write proxy for field `NTSEG1`"]
pub struct NTSEG1_W<'a> {
w: &'a mut W,
}
impl<'a> NTSEG1_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0xff << 8)) | (((value as u32) & 0xff) << 8);
self.w
}
}
#[doc = "Reader of field `NBRP`"]
pub type NBRP_R = crate::R<u16, u16>;
#[doc = "Write proxy for field `NBRP`"]
pub struct NBRP_W<'a> {
w: &'a mut W,
}
impl<'a> NBRP_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u16) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01ff << 16)) | (((value as u32) & 0x01ff) << 16);
self.w
}
}
#[doc = "Reader of field `NSJW`"]
pub type NSJW_R = crate::R<u8, u8>;
#[doc = "Write proxy for field `NSJW`"]
pub struct NSJW_W<'a> {
w: &'a mut W,
}
impl<'a> NSJW_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x7f << 25)) | (((value as u32) & 0x7f) << 25);
self.w
}
}
impl R {
#[doc = "Bits 0:6 - Nominal Time segment after sample point"]
#[inline(always)]
pub fn ntseg2(&self) -> NTSEG2_R {
NTSEG2_R::new((self.bits & 0x7f) as u8)
}
#[doc = "Bits 8:15 - Nominal Time segment before sample point"]
#[inline(always)]
pub fn ntseg1(&self) -> NTSEG1_R {
NTSEG1_R::new(((self.bits >> 8) & 0xff) as u8)
}
#[doc = "Bits 16:24 - Nominal Baud Rate Prescaler"]
#[inline(always)]
pub fn nbrp(&self) -> NBRP_R {
NBRP_R::new(((self.bits >> 16) & 0x01ff) as u16)
}
#[doc = "Bits 25:31 - Nominal (Re)Synchronization Jump Width"]
#[inline(always)]
pub fn nsjw(&self) -> NSJW_R {
NSJW_R::new(((self.bits >> 25) & 0x7f) as u8)
}
}
impl W {
#[doc = "Bits 0:6 - Nominal Time segment after sample point"]
#[inline(always)]
pub fn ntseg2(&mut self) -> NTSEG2_W {
NTSEG2_W { w: self }
}
#[doc = "Bits 8:15 - Nominal Time segment before sample point"]
#[inline(always)]
pub fn ntseg1(&mut self) -> NTSEG1_W {
NTSEG1_W { w: self }
}
#[doc = "Bits 16:24 - Nominal Baud Rate Prescaler"]
#[inline(always)]
pub fn nbrp(&mut self) -> NBRP_W {
NBRP_W { w: self }
}
#[doc = "Bits 25:31 - Nominal (Re)Synchronization Jump Width"]
#[inline(always)]
pub fn nsjw(&mut self) -> NSJW_W {
NSJW_W { w: self }
}
}