1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126

#[doc = r"Register block"]
#[repr(C)]
pub struct COUNT8 {
    #[doc = "0x00 - Control A"]
    pub ctrla: CTRLA,
    #[doc = "0x04 - Control B Clear"]
    pub ctrlbclr: CTRLBCLR,
    #[doc = "0x05 - Control B Set"]
    pub ctrlbset: CTRLBSET,
    #[doc = "0x06 - Event Control"]
    pub evctrl: EVCTRL,
    #[doc = "0x08 - Interrupt Enable Clear"]
    pub intenclr: INTENCLR,
    #[doc = "0x09 - Interrupt Enable Set"]
    pub intenset: INTENSET,
    #[doc = "0x0a - Interrupt Flag Status and Clear"]
    pub intflag: INTFLAG,
    #[doc = "0x0b - Status"]
    pub status: STATUS,
    #[doc = "0x0c - Waveform Generation Control"]
    pub wave: WAVE,
    #[doc = "0x0d - Control C"]
    pub drvctrl: DRVCTRL,
    _reserved10: [u8; 0x01],
    #[doc = "0x0f - Debug Control"]
    pub dbgctrl: DBGCTRL,
    #[doc = "0x10 - Synchronization Status"]
    pub syncbusy: SYNCBUSY,
    #[doc = "0x14 - COUNT8 Count"]
    pub count: COUNT,
    _reserved13: [u8; 0x06],
    #[doc = "0x1b - COUNT8 Period"]
    pub per: PER,
    #[doc = "0x1c - COUNT8 Compare and Capture"]
    pub cc: [CC; 2],
    _reserved15: [u8; 0x11],
    #[doc = "0x2f - COUNT8 Period Buffer"]
    pub perbuf: PERBUF,
    #[doc = "0x30 - COUNT8 Compare and Capture Buffer"]
    pub ccbuf: [CCBUF; 2],
}
#[doc = "CTRLA (rw) register accessor: Control A\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrla::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrla::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrla`]
module"]
pub type CTRLA = crate::Reg<ctrla::CTRLA_SPEC>;
#[doc = "Control A"]
pub mod ctrla;
#[doc = "CTRLBCLR (rw) register accessor: Control B Clear\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrlbclr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrlbclr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrlbclr`]
module"]
pub type CTRLBCLR = crate::Reg<ctrlbclr::CTRLBCLR_SPEC>;
#[doc = "Control B Clear"]
pub mod ctrlbclr;
#[doc = "CTRLBSET (rw) register accessor: Control B Set\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ctrlbset::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ctrlbset::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrlbset`]
module"]
pub type CTRLBSET = crate::Reg<ctrlbset::CTRLBSET_SPEC>;
#[doc = "Control B Set"]
pub mod ctrlbset;
#[doc = "EVCTRL (rw) register accessor: Event Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`evctrl::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`evctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@evctrl`]
module"]
pub type EVCTRL = crate::Reg<evctrl::EVCTRL_SPEC>;
#[doc = "Event Control"]
pub mod evctrl;
#[doc = "INTENCLR (rw) register accessor: Interrupt Enable Clear\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intenclr::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intenclr::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenclr`]
module"]
pub type INTENCLR = crate::Reg<intenclr::INTENCLR_SPEC>;
#[doc = "Interrupt Enable Clear"]
pub mod intenclr;
#[doc = "INTENSET (rw) register accessor: Interrupt Enable Set\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intenset::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intenset::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenset`]
module"]
pub type INTENSET = crate::Reg<intenset::INTENSET_SPEC>;
#[doc = "Interrupt Enable Set"]
pub mod intenset;
#[doc = "INTFLAG (rw) register accessor: Interrupt Flag Status and Clear\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intflag::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intflag::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intflag`]
module"]
pub type INTFLAG = crate::Reg<intflag::INTFLAG_SPEC>;
#[doc = "Interrupt Flag Status and Clear"]
pub mod intflag;
#[doc = "STATUS (rw) register accessor: Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`status::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`status::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
module"]
pub type STATUS = crate::Reg<status::STATUS_SPEC>;
#[doc = "Status"]
pub mod status;
#[doc = "WAVE (rw) register accessor: Waveform Generation Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`wave::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`wave::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wave`]
module"]
pub type WAVE = crate::Reg<wave::WAVE_SPEC>;
#[doc = "Waveform Generation Control"]
pub mod wave;
#[doc = "DRVCTRL (rw) register accessor: Control C\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`drvctrl::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`drvctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@drvctrl`]
module"]
pub type DRVCTRL = crate::Reg<drvctrl::DRVCTRL_SPEC>;
#[doc = "Control C"]
pub mod drvctrl;
#[doc = "DBGCTRL (rw) register accessor: Debug Control\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`dbgctrl::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`dbgctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dbgctrl`]
module"]
pub type DBGCTRL = crate::Reg<dbgctrl::DBGCTRL_SPEC>;
#[doc = "Debug Control"]
pub mod dbgctrl;
#[doc = "SYNCBUSY (r) register accessor: Synchronization Status\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`syncbusy::R`].  See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@syncbusy`]
module"]
pub type SYNCBUSY = crate::Reg<syncbusy::SYNCBUSY_SPEC>;
#[doc = "Synchronization Status"]
pub mod syncbusy;
#[doc = "COUNT (rw) register accessor: COUNT8 Count\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`count::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`count::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@count`]
module"]
pub type COUNT = crate::Reg<count::COUNT_SPEC>;
#[doc = "COUNT8 Count"]
pub mod count;
#[doc = "PER (rw) register accessor: COUNT8 Period\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`per::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`per::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@per`]
module"]
pub type PER = crate::Reg<per::PER_SPEC>;
#[doc = "COUNT8 Period"]
pub mod per;
#[doc = "CC (rw) register accessor: COUNT8 Compare and Capture\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cc::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cc`]
module"]
pub type CC = crate::Reg<cc::CC_SPEC>;
#[doc = "COUNT8 Compare and Capture"]
pub mod cc;
#[doc = "PERBUF (rw) register accessor: COUNT8 Period Buffer\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`perbuf::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`perbuf::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@perbuf`]
module"]
pub type PERBUF = crate::Reg<perbuf::PERBUF_SPEC>;
#[doc = "COUNT8 Period Buffer"]
pub mod perbuf;
#[doc = "CCBUF (rw) register accessor: COUNT8 Compare and Capture Buffer\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`ccbuf::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`ccbuf::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ccbuf`]
module"]
pub type CCBUF = crate::Reg<ccbuf::CCBUF_SPEC>;
#[doc = "COUNT8 Compare and Capture Buffer"]
pub mod ccbuf;