Struct alt_stm32f30x_hal::gpio::PB4

pub struct PB4<PT: PullType, PM: PinMode> { /* private fields */ }

Pin

Implementations

impl<PT: PullType, PM: PinMode> PB4<PT, PM>

pub fn downgrade(self) -> PBx<PT, PM>

Erases the pin number from the type

This is useful when you want to collect the pins into an array where you need all the elements to have the same type

pub fn pull_type<NPT: PullType>(self, pt: NPT) -> PB4<NPT, PM>

Sets pull type: Floaing, PullUp, PullDown

pub fn input(self) -> PB4<PT, Input>

Sets io_mode to input

pub fn analog(self) -> PB4<PT, Analog>

Sets io_mode to analog

pub fn output(self) -> PB4<PT, Output<PushPull, LowSpeed>>

Set io_mode to output

pub fn alternating<AFN: AltFnNum>(
    self,
    af: AFN
) -> PB4<PT, AltFn<AFN, PushPull, LowSpeed>>

Set io_mode to altfn and set alternating function

impl<PT: PullType, OT: OutputType, OS: OutputSpeed> PB4<PT, Output<OT, OS>>

pub fn output_type<NOT: OutputType>(self, ot: NOT) -> PB4<PT, Output<NOT, OS>>

Set output type

pub fn push_pull(self) -> PB4<PT, Output<PushPull, OS>>

Set output type to PushPull

pub fn open_drain(self) -> PB4<PT, Output<OpenDrain, OS>>

Set output type to OpenDrain

pub fn output_speed<NOS: OutputSpeed>(self, os: NOS) -> PB4<PT, Output<OT, NOS>>

Set output speed

impl<PT: PullType, AFN: AltFnNum, OT: OutputType, OS: OutputSpeed> PB4<PT, AltFn<AFN, OT, OS>>

pub fn output_type<NOT: OutputType>(
    self,
    ot: NOT
) -> PB4<PT, AltFn<AFN, NOT, OS>>

Set output type

pub fn output_speed<NOS: OutputSpeed>(
    self,
    os: NOS
) -> PB4<PT, AltFn<AFN, OT, NOS>>

Set output speed

pub fn alt_fn<NAFN: AltFnNum>(self, af: NAFN) -> PB4<PT, AltFn<NAFN, OT, OS>>

Set altfn

Trait Implementations

impl<PT: PullType, PM: PinMode> GPIOPin for PB4<PT, PM>

fn group(&self) -> Group

Returns GPIO group

fn index(&self) -> u8

Returns pin index within group

impl<PT: PullType> InputPin for PB4<PT, Input>

fn is_high(&self) -> bool

👎Deprecated since 0.2.2: Deprecated because the methods cannot return errors. Users should use the traits in digital::v2.

Is the input pin high?

fn is_low(&self) -> bool

👎Deprecated since 0.2.2: Deprecated because the methods cannot return errors. Users should use the traits in digital::v2.

Is the input pin low?

impl<PT: PullType, AN: AltFnNum, OT: OutputType, OS: OutputSpeed> OutputPin for PB4<PT, AltFn<AN, OT, OS>>

fn set_high(&mut self)

👎Deprecated since 0.2.2: Deprecated because the methods cannot return errors. Users should use the traits in digital::v2.

Drives the pin high

fn set_low(&mut self)

👎Deprecated since 0.2.2: Deprecated because the methods cannot return errors. Users should use the traits in digital::v2.

Drives the pin low

impl<PT: PullType, OT: OutputType, OS: OutputSpeed> OutputPin for PB4<PT, Output<OT, OS>>

fn set_high(&mut self)

👎Deprecated since 0.2.2: Deprecated because the methods cannot return errors. Users should use the traits in digital::v2.

Drives the pin high

fn set_low(&mut self)

👎Deprecated since 0.2.2: Deprecated because the methods cannot return errors. Users should use the traits in digital::v2.

Drives the pin low

impl<PT: PullType, PM: PinMode> SerialExt<USART2, PA14<PT, PM>, PB4<PT, PM>, PA14<PT, AltFn<AF7, PushPull, HighSpeed>>, PB4<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART2

fn serial(
    self,
    pins: (PA14<PT, PM>, PB4<PT, PM>),
    baud_rate: Bps<u32>,
    clocks: Clocks
) -> Serial<USART2, (PA14<PT, AltFn<AF7, PushPull, HighSpeed>>, PB4<PT, AltFn<AF7, PushPull, HighSpeed>>)>

Configures USART and consumes pair of (tx, rx) pins to act as serial port. Configures pins accordingly. Returns Serial.

impl<PT: PullType, PM: PinMode> SerialExt<USART2, PA2<PT, PM>, PB4<PT, PM>, PA2<PT, AltFn<AF7, PushPull, HighSpeed>>, PB4<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART2

fn serial(
    self,
    pins: (PA2<PT, PM>, PB4<PT, PM>),
    baud_rate: Bps<u32>,
    clocks: Clocks
) -> Serial<USART2, (PA2<PT, AltFn<AF7, PushPull, HighSpeed>>, PB4<PT, AltFn<AF7, PushPull, HighSpeed>>)>

Configures USART and consumes pair of (tx, rx) pins to act as serial port. Configures pins accordingly. Returns Serial.

impl<PT: PullType, PM: PinMode> SerialExt<USART2, PB3<PT, PM>, PB4<PT, PM>, PB3<PT, AltFn<AF7, PushPull, HighSpeed>>, PB4<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART2

fn serial(
    self,
    pins: (PB3<PT, PM>, PB4<PT, PM>),
    baud_rate: Bps<u32>,
    clocks: Clocks
) -> Serial<USART2, (PB3<PT, AltFn<AF7, PushPull, HighSpeed>>, PB4<PT, AltFn<AF7, PushPull, HighSpeed>>)>

Configures USART and consumes pair of (tx, rx) pins to act as serial port. Configures pins accordingly. Returns Serial.

impl<PT: PullType, PM: PinMode> SerialExt<USART2, PD5<PT, PM>, PB4<PT, PM>, PD5<PT, AltFn<AF7, PushPull, HighSpeed>>, PB4<PT, AltFn<AF7, PushPull, HighSpeed>>> for USART2

fn serial(
    self,
    pins: (PD5<PT, PM>, PB4<PT, PM>),
    baud_rate: Bps<u32>,
    clocks: Clocks
) -> Serial<USART2, (PD5<PT, AltFn<AF7, PushPull, HighSpeed>>, PB4<PT, AltFn<AF7, PushPull, HighSpeed>>)>

Configures USART and consumes pair of (tx, rx) pins to act as serial port. Configures pins accordingly. Returns Serial.

impl<PT: PullType, PM: PinMode> SpiExt<SPI1, PA5<PT, PM>, PB4<PT, PM>, PA7<PT, PM>, PA5<PT, AltFn<AF5, PushPull, HighSpeed>>, PB4<PT, AltFn<AF5, PushPull, HighSpeed>>, PA7<PT, AltFn<AF5, PushPull, HighSpeed>>> for SPI1

fn spi<F>(
    self,
    pins: (PA5<PT, PM>, PB4<PT, PM>, PA7<PT, PM>),
    mode: Mode,
    freq: F,
    clocks: Clocks
) -> Spi<SPI1, (PA5<PT, AltFn<AF5, PushPull, HighSpeed>>, PB4<PT, AltFn<AF5, PushPull, HighSpeed>>, PA7<PT, AltFn<AF5, PushPull, HighSpeed>>)>where
    F: Into<Hertz<u32>>,

Configures the SPI peripheral to operate in full duplex master mode. Consumes SPI peripheral and triple of (SCK, MISO, MOSI) pins. Returns Spi.

impl<PT: PullType, PM: PinMode> SpiExt<SPI1, PA5<PT, PM>, PB4<PT, PM>, PB5<PT, PM>, PA5<PT, AltFn<AF5, PushPull, HighSpeed>>, PB4<PT, AltFn<AF5, PushPull, HighSpeed>>, PB5<PT, AltFn<AF5, PushPull, HighSpeed>>> for SPI1

fn spi<F>(
    self,
    pins: (PA5<PT, PM>, PB4<PT, PM>, PB5<PT, PM>),
    mode: Mode,
    freq: F,
    clocks: Clocks
) -> Spi<SPI1, (PA5<PT, AltFn<AF5, PushPull, HighSpeed>>, PB4<PT, AltFn<AF5, PushPull, HighSpeed>>, PB5<PT, AltFn<AF5, PushPull, HighSpeed>>)>where
    F: Into<Hertz<u32>>,

Configures the SPI peripheral to operate in full duplex master mode. Consumes SPI peripheral and triple of (SCK, MISO, MOSI) pins. Returns Spi.

impl<PT: PullType, PM: PinMode> SpiExt<SPI1, PB3<PT, PM>, PB4<PT, PM>, PA7<PT, PM>, PB3<PT, AltFn<AF5, PushPull, HighSpeed>>, PB4<PT, AltFn<AF5, PushPull, HighSpeed>>, PA7<PT, AltFn<AF5, PushPull, HighSpeed>>> for SPI1

fn spi<F>(
    self,
    pins: (PB3<PT, PM>, PB4<PT, PM>, PA7<PT, PM>),
    mode: Mode,
    freq: F,
    clocks: Clocks
) -> Spi<SPI1, (PB3<PT, AltFn<AF5, PushPull, HighSpeed>>, PB4<PT, AltFn<AF5, PushPull, HighSpeed>>, PA7<PT, AltFn<AF5, PushPull, HighSpeed>>)>where
    F: Into<Hertz<u32>>,

Configures the SPI peripheral to operate in full duplex master mode. Consumes SPI peripheral and triple of (SCK, MISO, MOSI) pins. Returns Spi.

impl<PT: PullType, PM: PinMode> SpiExt<SPI1, PB3<PT, PM>, PB4<PT, PM>, PB5<PT, PM>, PB3<PT, AltFn<AF5, PushPull, HighSpeed>>, PB4<PT, AltFn<AF5, PushPull, HighSpeed>>, PB5<PT, AltFn<AF5, PushPull, HighSpeed>>> for SPI1

fn spi<F>(
    self,
    pins: (PB3<PT, PM>, PB4<PT, PM>, PB5<PT, PM>),
    mode: Mode,
    freq: F,
    clocks: Clocks
) -> Spi<SPI1, (PB3<PT, AltFn<AF5, PushPull, HighSpeed>>, PB4<PT, AltFn<AF5, PushPull, HighSpeed>>, PB5<PT, AltFn<AF5, PushPull, HighSpeed>>)>where
    F: Into<Hertz<u32>>,

Configures the SPI peripheral to operate in full duplex master mode. Consumes SPI peripheral and triple of (SCK, MISO, MOSI) pins. Returns Spi.

impl<PT: PullType, PM: PinMode> SpiExt<SPI3, PB3<PT, PM>, PB4<PT, PM>, PB5<PT, PM>, PB3<PT, AltFn<AF6, PushPull, HighSpeed>>, PB4<PT, AltFn<AF6, PushPull, HighSpeed>>, PB5<PT, AltFn<AF6, PushPull, HighSpeed>>> for SPI3

fn spi<F>(
    self,
    pins: (PB3<PT, PM>, PB4<PT, PM>, PB5<PT, PM>),
    mode: Mode,
    freq: F,
    clocks: Clocks
) -> Spi<SPI3, (PB3<PT, AltFn<AF6, PushPull, HighSpeed>>, PB4<PT, AltFn<AF6, PushPull, HighSpeed>>, PB5<PT, AltFn<AF6, PushPull, HighSpeed>>)>where
    F: Into<Hertz<u32>>,

Configures the SPI peripheral to operate in full duplex master mode. Consumes SPI peripheral and triple of (SCK, MISO, MOSI) pins. Returns Spi.

impl<PT: PullType, PM: PinMode> SpiExt<SPI3, PB3<PT, PM>, PB4<PT, PM>, PC12<PT, PM>, PB3<PT, AltFn<AF6, PushPull, HighSpeed>>, PB4<PT, AltFn<AF6, PushPull, HighSpeed>>, PC12<PT, AltFn<AF6, PushPull, HighSpeed>>> for SPI3

fn spi<F>(
    self,
    pins: (PB3<PT, PM>, PB4<PT, PM>, PC12<PT, PM>),
    mode: Mode,
    freq: F,
    clocks: Clocks
) -> Spi<SPI3, (PB3<PT, AltFn<AF6, PushPull, HighSpeed>>, PB4<PT, AltFn<AF6, PushPull, HighSpeed>>, PC12<PT, AltFn<AF6, PushPull, HighSpeed>>)>where
    F: Into<Hertz<u32>>,

Configures the SPI peripheral to operate in full duplex master mode. Consumes SPI peripheral and triple of (SCK, MISO, MOSI) pins. Returns Spi.

impl<PT: PullType, PM: PinMode> SpiExt<SPI3, PC10<PT, PM>, PB4<PT, PM>, PB5<PT, PM>, PC10<PT, AltFn<AF6, PushPull, HighSpeed>>, PB4<PT, AltFn<AF6, PushPull, HighSpeed>>, PB5<PT, AltFn<AF6, PushPull, HighSpeed>>> for SPI3

fn spi<F>(
    self,
    pins: (PC10<PT, PM>, PB4<PT, PM>, PB5<PT, PM>),
    mode: Mode,
    freq: F,
    clocks: Clocks
) -> Spi<SPI3, (PC10<PT, AltFn<AF6, PushPull, HighSpeed>>, PB4<PT, AltFn<AF6, PushPull, HighSpeed>>, PB5<PT, AltFn<AF6, PushPull, HighSpeed>>)>where
    F: Into<Hertz<u32>>,

Configures the SPI peripheral to operate in full duplex master mode. Consumes SPI peripheral and triple of (SCK, MISO, MOSI) pins. Returns Spi.

impl<PT: PullType, PM: PinMode> SpiExt<SPI3, PC10<PT, PM>, PB4<PT, PM>, PC12<PT, PM>, PC10<PT, AltFn<AF6, PushPull, HighSpeed>>, PB4<PT, AltFn<AF6, PushPull, HighSpeed>>, PC12<PT, AltFn<AF6, PushPull, HighSpeed>>> for SPI3

fn spi<F>(
    self,
    pins: (PC10<PT, PM>, PB4<PT, PM>, PC12<PT, PM>),
    mode: Mode,
    freq: F,
    clocks: Clocks
) -> Spi<SPI3, (PC10<PT, AltFn<AF6, PushPull, HighSpeed>>, PB4<PT, AltFn<AF6, PushPull, HighSpeed>>, PC12<PT, AltFn<AF6, PushPull, HighSpeed>>)>where
    F: Into<Hertz<u32>>,

Configures the SPI peripheral to operate in full duplex master mode. Consumes SPI peripheral and triple of (SCK, MISO, MOSI) pins. Returns Spi.

impl<PT: PullType, OT: OutputType, OS: OutputSpeed> StatefulOutputPin for PB4<PT, Output<OT, OS>>

fn is_set_high(&self) -> bool

👎Deprecated since 0.2.2: Deprecated because the methods cannot return errors. Users should use the traits in digital::v2.

Is the pin in drive high mode?

fn is_set_low(&self) -> bool

👎Deprecated since 0.2.2: Deprecated because the methods cannot return errors. Users should use the traits in digital::v2.

Is the pin in drive low mode?

impl<PT: PullType, OT: OutputType, OS: OutputSpeed> Default for PB4<PT, Output<OT, OS>>