[−]Struct adxl343::DataFormatFlags
Flags passed as operands to Register::DATA_FORMAT
"The DATA_FORMAT register controls the presentation of data to Register 0x32 through Register 0x37. All data, except that for the ±16 g range, must be clipped to avoid rollover."
Methods
impl DataFormatFlags
pub const SELF_TEST: DataFormatFlags
"A setting of 1 in the SELF_TEST bit applies a self-test force to the sensor, causing a shift in the output data. A value of 0 disables the self-test force."
pub const SPI: DataFormatFlags
"A value of 1 in the SPI bit sets the device to 3-wire SPI mode, and a value of 0 sets the device to 4-wire SPI mode"
pub const INT_INVERT: DataFormatFlags
"A value of 0 in the INT_INVERT bit sets the interrupts to active high, and a value of 1 sets the interrupts to active low."
pub const FULL_RES: DataFormatFlags
"When this bit is set to a value of 1, the device is in full resolution mode, where the output resolution increases with the g range set by the range bits to maintain a 4 mg/LSB scale factor. When the FULL_RES bit is set to 0, the device is in 10-bit mode, and the range bits determine the maximum g range and scale factor"
pub const JUSTIFY: DataFormatFlags
A setting of 1 in the justify bit selects left-justified (MSB) mode, and a setting of 0 selects right-justified mode with sign extension.
pub const RANGE_HI: DataFormatFlags
Range high bit (see DataFormatRange
)
pub const RANGE_LO: DataFormatFlags
Range low bit (see DataFormatRange
)
pub const fn empty() -> DataFormatFlags
Returns an empty set of flags
pub const fn all() -> DataFormatFlags
Returns the set containing all flags.
pub const fn bits(&self) -> u8
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u8) -> Option<DataFormatFlags>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub const fn from_bits_truncate(bits: u8) -> DataFormatFlags
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub const unsafe fn from_bits_unchecked(bits: u8) -> DataFormatFlags
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
pub const fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub const fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub const fn intersects(&self, other: DataFormatFlags) -> bool
Returns true
if there are flags common to both self
and other
.
pub const fn contains(&self, other: DataFormatFlags) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: DataFormatFlags)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: DataFormatFlags)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: DataFormatFlags)
Toggles the specified flags in-place.
pub fn set(&mut self, other: DataFormatFlags, value: bool)
Inserts or removes the specified flags depending on the passed value.
impl DataFormatFlags
[src]
pub fn range(self) -> DataFormatRange
[src]
Get the DataFormatRange
from the flags
Trait Implementations
impl Binary for DataFormatFlags
impl BitAnd<DataFormatFlags> for DataFormatFlags
type Output = DataFormatFlags
The resulting type after applying the &
operator.
fn bitand(self, other: DataFormatFlags) -> DataFormatFlags
Returns the intersection between the two sets of flags.
impl BitAndAssign<DataFormatFlags> for DataFormatFlags
fn bitand_assign(&mut self, other: DataFormatFlags)
Disables all flags disabled in the set.
impl BitOr<DataFormatFlags> for DataFormatFlags
type Output = DataFormatFlags
The resulting type after applying the |
operator.
fn bitor(self, other: DataFormatFlags) -> DataFormatFlags
Returns the union of the two sets of flags.
impl BitOrAssign<DataFormatFlags> for DataFormatFlags
fn bitor_assign(&mut self, other: DataFormatFlags)
Adds the set of flags.
impl BitXor<DataFormatFlags> for DataFormatFlags
type Output = DataFormatFlags
The resulting type after applying the ^
operator.
fn bitxor(self, other: DataFormatFlags) -> DataFormatFlags
Returns the left flags, but with all the right flags toggled.
impl BitXorAssign<DataFormatFlags> for DataFormatFlags
fn bitxor_assign(&mut self, other: DataFormatFlags)
Toggles the set of flags.
impl Clone for DataFormatFlags
fn clone(&self) -> DataFormatFlags
fn clone_from(&mut self, source: &Self)
1.0.0[src]
impl Copy for DataFormatFlags
impl Debug for DataFormatFlags
impl Default for DataFormatFlags
[src]
Default DATA_FORMAT
settings:
SELF_TEST
: falseSPI
: falseINT_INVERT
: falseFULL_RES
: falseJUSTIFY
: false- Range: ±2g (i.e. 0)
impl Eq for DataFormatFlags
impl Extend<DataFormatFlags> for DataFormatFlags
fn extend<T: IntoIterator<Item = DataFormatFlags>>(&mut self, iterator: T)
impl From<DataFormatRange> for DataFormatFlags
[src]
fn from(range: DataFormatRange) -> DataFormatFlags
[src]
impl FromIterator<DataFormatFlags> for DataFormatFlags
fn from_iter<T: IntoIterator<Item = DataFormatFlags>>(
iterator: T
) -> DataFormatFlags
iterator: T
) -> DataFormatFlags
impl Hash for DataFormatFlags
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
H: Hasher,
impl LowerHex for DataFormatFlags
impl Not for DataFormatFlags
type Output = DataFormatFlags
The resulting type after applying the !
operator.
fn not(self) -> DataFormatFlags
Returns the complement of this set of flags.
impl Octal for DataFormatFlags
impl Ord for DataFormatFlags
fn cmp(&self, other: &DataFormatFlags) -> Ordering
fn max(self, other: Self) -> Self
1.21.0[src]
fn min(self, other: Self) -> Self
1.21.0[src]
fn clamp(self, min: Self, max: Self) -> Self
[src]
impl PartialEq<DataFormatFlags> for DataFormatFlags
fn eq(&self, other: &DataFormatFlags) -> bool
fn ne(&self, other: &DataFormatFlags) -> bool
impl PartialOrd<DataFormatFlags> for DataFormatFlags
fn partial_cmp(&self, other: &DataFormatFlags) -> Option<Ordering>
fn lt(&self, other: &DataFormatFlags) -> bool
fn le(&self, other: &DataFormatFlags) -> bool
fn gt(&self, other: &DataFormatFlags) -> bool
fn ge(&self, other: &DataFormatFlags) -> bool
impl StructuralEq for DataFormatFlags
impl StructuralPartialEq for DataFormatFlags
impl Sub<DataFormatFlags> for DataFormatFlags
type Output = DataFormatFlags
The resulting type after applying the -
operator.
fn sub(self, other: DataFormatFlags) -> DataFormatFlags
Returns the set difference of the two sets of flags.
impl SubAssign<DataFormatFlags> for DataFormatFlags
fn sub_assign(&mut self, other: DataFormatFlags)
Disables all flags enabled in the set.
impl UpperHex for DataFormatFlags
Auto Trait Implementations
Blanket Implementations
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> From<T> for T
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Same<T> for T
type Output = T
Should always be Self
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,