[−][src]Module adf4351::constants
Constants
Constants
| OUT_FREQ_MAX | VCO output, no divider |
| OUT_FREQ_MIN | Minimum allowed output frequency 2200 MHz fundamental output and divide-by-64 selected |
| OUT_FREQ_P45_MAX | When the prescaler is set to 4/5, the maximum RF frequency allowed is 3.6 GHz. Therefore, when operating the ADF4351 above 3.6 GHz, the prescaler must be set to 8/9. |
| PFD_FREQ_FRACN_EASY_MAX | The prescaler limits the INT value as follows: Prescaler = 4/5: N MIN = 23 Prescaler = 8/9: N MIN = 75 This frequency is low enough that it covers VCO range when multiplied by 75 |
| PFD_FREQ_FRACN_MAX | Max Phase Detector Frequency (fractional N mode) |
| PFD_FREQ_INTN_BS_MAX | Max Phase Detector Frequency (Integer-N, band select enabled) |
| PFD_FREQ_INTN_MAX | Max Phase Detector Frequency (Integer-N, band select disabled) |
| REF_IN_FREQ_MAX | Maximum allowed REFin frequency |
| REF_IN_FREQ_MIN | Minimum allowed REFin frequency |
| VCO_FREQ_MAX | Fundamental VCO mode (before dividers), max frequency |
| VCO_FREQ_MIN | Fundamental VCO mode (before dividers), min frequency |