Struct cortex_a::register::CNTP_CTL_EL0

pub struct CNTP_CTL_EL0 { /* fields omitted */ }

CNTP_CTL_EL0

Methods

impl CNTP_CTL_EL0

pub const ENABLE: CNTP_CTL_EL0

ENABLE: CNTP_CTL_EL0 = CNTP_CTL_EL0{bits: 1,}

Enables the timer. Permitted values are:

0 Timer disabled. 1 Timer enabled.

pub const IMASK: CNTP_CTL_EL0

IMASK: CNTP_CTL_EL0 = CNTP_CTL_EL0{bits: 1 << 1,}

Timer interrupt mask bit. Permitted values are:

0 Timer interrupt is not masked by the IMASK bit. 1 Timer interrupt is masked by the IMASK bit.

pub const ISTATUS: CNTP_CTL_EL0

ISTATUS: CNTP_CTL_EL0 = CNTP_CTL_EL0{bits: 1 << 2,}

The status of the timer. This bit indicates whether the timer condition is met:

0 Timer condition is not met. 1 Timer condition is met.

pub fn empty() -> CNTP_CTL_EL0

Returns an empty set of flags.

pub fn all() -> CNTP_CTL_EL0

Returns the set containing all flags.

pub fn bits(&self) -> u64

Returns the raw value of the flags currently stored.

pub fn from_bits(bits: u64) -> Option<CNTP_CTL_EL0>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub fn from_bits_truncate(bits: u64) -> CNTP_CTL_EL0

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub fn intersects(&self, other: CNTP_CTL_EL0) -> bool

Returns true if there are flags common to both self and other.

pub fn contains(&self, other: CNTP_CTL_EL0) -> bool

Returns true all of the flags in other are contained within self.

pub fn insert(&mut self, other: CNTP_CTL_EL0)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: CNTP_CTL_EL0)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: CNTP_CTL_EL0)

Toggles the specified flags in-place.

pub fn set(&mut self, other: CNTP_CTL_EL0, value: bool)

Inserts or removes the specified flags depending on the passed value.

impl CNTP_CTL_EL0

pub fn read_raw() -> u64

Reads the raw bits of the CPU register.

pub unsafe fn write_raw(reg: u64)

Writes raw bits to the CPU register.

pub unsafe fn modify_raw<F>(f: F) where
    F: FnOnce(&mut u64), 

Modifies register using raw bits.

pub fn read_flags() -> Self

Reads the current set of the register's flags.

pub unsafe fn write_flags(&self)

Write the flags to the CPU register.

pub unsafe fn modify_flags<F>(f: F) where
    F: FnOnce(&mut Self), 

Modifies register using flags-functions.

Trait Implementations

impl Copy for CNTP_CTL_EL0

impl PartialEq for CNTP_CTL_EL0

fn eq(&self, __arg_0: &CNTP_CTL_EL0) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, __arg_0: &CNTP_CTL_EL0) -> bool

This method tests for !=.

impl Eq for CNTP_CTL_EL0

impl Clone for CNTP_CTL_EL0

fn clone(&self) -> CNTP_CTL_EL0

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialOrd for CNTP_CTL_EL0

fn partial_cmp(&self, __arg_0: &CNTP_CTL_EL0) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, __arg_0: &CNTP_CTL_EL0) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, __arg_0: &CNTP_CTL_EL0) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, __arg_0: &CNTP_CTL_EL0) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, __arg_0: &CNTP_CTL_EL0) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Ord for CNTP_CTL_EL0

fn cmp(&self, __arg_0: &CNTP_CTL_EL0) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

impl Hash for CNTP_CTL_EL0

fn hash<__H: Hasher>(&self, __arg_0: &mut __H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl Debug for CNTP_CTL_EL0

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Binary for CNTP_CTL_EL0

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl Octal for CNTP_CTL_EL0

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl LowerHex for CNTP_CTL_EL0

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl UpperHex for CNTP_CTL_EL0

fn fmt(&self, f: &mut Formatter) -> Result

Formats the value using the given formatter.

impl BitOr for CNTP_CTL_EL0

type Output = CNTP_CTL_EL0

The resulting type after applying the | operator.

fn bitor(self, other: CNTP_CTL_EL0) -> CNTP_CTL_EL0

Returns the union of the two sets of flags.

impl BitOrAssign for CNTP_CTL_EL0

fn bitor_assign(&mut self, other: CNTP_CTL_EL0)

Adds the set of flags.

impl BitXor for CNTP_CTL_EL0

type Output = CNTP_CTL_EL0

The resulting type after applying the ^ operator.

fn bitxor(self, other: CNTP_CTL_EL0) -> CNTP_CTL_EL0

Returns the left flags, but with all the right flags toggled.

impl BitXorAssign for CNTP_CTL_EL0

fn bitxor_assign(&mut self, other: CNTP_CTL_EL0)

Toggles the set of flags.

impl BitAnd for CNTP_CTL_EL0

type Output = CNTP_CTL_EL0

The resulting type after applying the & operator.

fn bitand(self, other: CNTP_CTL_EL0) -> CNTP_CTL_EL0

Returns the intersection between the two sets of flags.

impl BitAndAssign for CNTP_CTL_EL0

fn bitand_assign(&mut self, other: CNTP_CTL_EL0)

Disables all flags disabled in the set.

impl Sub for CNTP_CTL_EL0

type Output = CNTP_CTL_EL0

The resulting type after applying the - operator.

fn sub(self, other: CNTP_CTL_EL0) -> CNTP_CTL_EL0

Returns the set difference of the two sets of flags.

impl SubAssign for CNTP_CTL_EL0

fn sub_assign(&mut self, other: CNTP_CTL_EL0)

Disables all flags enabled in the set.

impl Not for CNTP_CTL_EL0

type Output = CNTP_CTL_EL0

The resulting type after applying the ! operator.

fn not(self) -> CNTP_CTL_EL0

Returns the complement of this set of flags.

impl Extend<CNTP_CTL_EL0> for CNTP_CTL_EL0

fn extend<T: IntoIterator<Item = CNTP_CTL_EL0>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

impl FromIterator<CNTP_CTL_EL0> for CNTP_CTL_EL0

fn from_iter<T: IntoIterator<Item = CNTP_CTL_EL0>>(iterator: T) -> CNTP_CTL_EL0

Creates a value from an iterator.