1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

use anyhow::Result;

use cnccoder::prelude::*;

fn main() -> Result<()> {
    // Create a program with metric measurements where the tool can travel freely at 10 mm
    // height, and move to 50 mm height for manual tool change.
    let mut program = Program::new(Units::Metric, 10.0, 50.0);

    // Create a cylindrical tool
    let tool = Tool::cylindrical(
        Units::Metric,        // Unit for tool measurements
        20.0,                 // Cutter length
        10.0,                 // Cutter diameter
        Direction::Clockwise, // Spindle rotation direction
        20000.0,              // Spindle speed (rpm)
        5000.0,               // Max feed rate/speed that the cutter will travel with (mm/min)
    );

    // Extend the program with the planing cuts
    program.extend(&tool, |context| {
        // Append the planing cuts to the cylindrical tool context
        context.append_cut(Cut::plane(
            // Start at the x 0 mm, y 0 mm, z 3 mm coordinates
            Vector3::new(0.0, 0.0, 3.0),
            // Plane a 100 x 100 mm area
            Vector2::new(100.0, 100.0),
            // Plane down to 0 mm height (from 3 mm)
            0.0,
            // Cut at the most 1 mm per pass
            1.0,
        ));

        Ok(())
    })?;

    // Write the G-code (for CNC) `planing.gcode` and Camotics project file
    // `planing.camotics` (for simulation) to disk using a resolution value
    // of 0.5 for the Camotics simulation.
    write_project("planing", &program, 0.5)?;

    Ok(())
}