Struct cc2650::ccfg::size_and_dis_flags::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn size_of_ccfg(&self) -> SIZE_OF_CCFGR

Bits 16:31 - Total size of CCFG in bytes.

pub fn disable_flags(&self) -> DISABLE_FLAGSR

Bits 4:15 - Reserved for future use. Software should not rely on the value of a reserved. Writing any other value than the reset/default value may result in undefined behavior.

pub fn dis_tcxo(&self) -> DIS_TCXOR

Bit 3 - Disable TCXO. 0: TCXO functionality enabled. 1: TCXO functionality disabled. Note: An external TCXO is required if DIS_TCXO = 0.

pub fn dis_gpram(&self) -> DIS_GPRAMR

Bit 2 - Disable GPRAM (or use the 8K VIMS RAM as CACHE RAM). 0: GPRAM is enabled and hence CACHE disabled. 1: GPRAM is disabled and instead CACHE is enabled (default). Notes: - Disabling CACHE will reduce CPU execution speed (up to 60%). - GPRAM is 8 K-bytes in size and located at 0x11000000-0x11001FFF if enabled. See: VIMS:CTL.MODE

pub fn dis_alt_dcdc_setting(&self) -> DIS_ALT_DCDC_SETTINGR

Bit 1 - Disable alternate DC/DC settings. 0: Enable alternate DC/DC settings. 1: Disable alternate DC/DC settings. See: MODE_CONF_1.ALT_DCDC_VMIN MODE_CONF_1.ALT_DCDC_DITHER_EN MODE_CONF_1.ALT_DCDC_IPEAK NOTE! The DriverLib function SysCtrl_DCDC_VoltageConditionalControl() must be called regularly to apply this field (handled automatically if using TI RTOS!).

pub fn dis_xosc_ovr(&self) -> DIS_XOSC_OVRR

Bit 0 - Disable XOSC override functionality. 0: Enable XOSC override functionality. 1: Disable XOSC override functionality. See: MODE_CONF_1.DELTA_IBIAS_INIT MODE_CONF_1.DELTA_IBIAS_OFFSET MODE_CONF_1.XOSC_MAX_START