Type Definition cc2538::aes::key_store_write_area::W

type W = W<u32, KEY_STORE_WRITE_AREA>;

Writer for register KEY_STORE_WRITE_AREA

Methods

impl W

pub fn reserved1(&mut self) -> RESERVED1_W

Bits 8:31 - 31:8] Write 0s and ignore on reading

pub fn ram_area7(&mut self) -> RAM_AREA7_W

Bit 7 - 7:7] Each RAM_AREAx represents an area of 128 bits. Select the key store RAM area(s) where the key(s) needs to be written 0: RAM_AREA7 is not selected to be written. 1: RAM_AREA7 is selected to be written. Writing to multiple RAM locations is possible only when the selected RAM areas are sequential. Keys that require more than one RAM locations (key size is 192 or 256 bits), must start at one of the following areas: RAM_AREA0, RAM_AREA2, RAM_AREA4, or RAM_AREA6.

pub fn ram_area6(&mut self) -> RAM_AREA6_W

Bit 6 - 6:6] Each RAM_AREAx represents an area of 128 bits. Select the key store RAM area(s) where the key(s) needs to be written 0: RAM_AREA6 is not selected to be written. 1: RAM_AREA6 is selected to be written. Writing to multiple RAM locations is possible only when the selected RAM areas are sequential. Keys that require more than one RAM locations (key size is 192 or 256 bits), must start at one of the following areas: RAM_AREA0, RAM_AREA2, RAM_AREA4, or RAM_AREA6.

pub fn ram_area5(&mut self) -> RAM_AREA5_W

Bit 5 - 5:5] Each RAM_AREAx represents an area of 128 bits. Select the key store RAM area(s) where the key(s) needs to be written 0: RAM_AREA5 is not selected to be written. 1: RAM_AREA5 is selected to be written. Writing to multiple RAM locations is possible only when the selected RAM areas are sequential. Keys that require more than one RAM locations (key size is 192 or 256 bits), must start at one of the following areas: RAM_AREA0, RAM_AREA2, RAM_AREA4, or RAM_AREA6.

pub fn ram_area4(&mut self) -> RAM_AREA4_W

Bit 4 - 4:4] Each RAM_AREAx represents an area of 128 bits. Select the key store RAM area(s) where the key(s) needs to be written 0: RAM_AREA4 is not selected to be written. 1: RAM_AREA4 is selected to be written. Writing to multiple RAM locations is possible only when the selected RAM areas are sequential. Keys that require more than one RAM locations (key size is 192 or 256 bits), must start at one of the following areas: RAM_AREA0, RAM_AREA2, RAM_AREA4, or RAM_AREA6.

pub fn ram_area3(&mut self) -> RAM_AREA3_W

Bit 3 - 3:3] Each RAM_AREAx represents an area of 128 bits. Select the key store RAM area(s) where the key(s) needs to be written 0: RAM_AREA3 is not selected to be written. 1: RAM_AREA3 is selected to be written. Writing to multiple RAM locations is possible only when the selected RAM areas are sequential. Keys that require more than one RAM locations (key size is 192 or 256 bits), must start at one of the following areas: RAM_AREA0, RAM_AREA2, RAM_AREA4, or RAM_AREA6.

pub fn ram_area2(&mut self) -> RAM_AREA2_W

Bit 2 - 2:2] Each RAM_AREAx represents an area of 128 bits. Select the key store RAM area(s) where the key(s) needs to be written 0: RAM_AREA2 is not selected to be written. 1: RAM_AREA2 is selected to be written. Writing to multiple RAM locations is possible only when the selected RAM areas are sequential. Keys that require more than one RAM locations (key size is 192 or 256 bits), must start at one of the following areas: RAM_AREA0, RAM_AREA2, RAM_AREA4, or RAM_AREA6.

pub fn ram_area1(&mut self) -> RAM_AREA1_W

Bit 1 - 1:1] Each RAM_AREAx represents an area of 128 bits. Select the key store RAM area(s) where the key(s) needs to be written 0: RAM_AREA1 is not selected to be written. 1: RAM_AREA1 is selected to be written. Writing to multiple RAM locations is possible only when the selected RAM areas are sequential. Keys that require more than one RAM locations (key size is 192 or 256 bits), must start at one of the following areas: RAM_AREA0, RAM_AREA2, RAM_AREA4, or RAM_AREA6.

pub fn ram_area0(&mut self) -> RAM_AREA0_W

Bit 0 - 0:0] Each RAM_AREAx represents an area of 128 bits. Select the key store RAM area(s) where the key(s) needs to be written 0: RAM_AREA0 is not selected to be written. 1: RAM_AREA0 is selected to be written. Writing to multiple RAM locations is possible only when the selected RAM areas are sequential. Keys that require more than one RAM locations (key size is 192 or 256 bits), must start at one of the following areas: RAM_AREA0, RAM_AREA2, RAM_AREA4, or RAM_AREA6.