Struct cc13x2_cc26x2_hal::wdt::test::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn reserved9(&self) -> RESERVED9R

Bits 9:31 - 31:9] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn stall(&self) -> STALLR

Bit 8 - 8:8] WDT Stall Enable 0: The WDT timer continues counting if the CPU is stopped with a debugger. 1: If the CPU is stopped with a debugger, the WDT stops counting. Once the CPU is restarted, the WDT resumes counting.

pub fn reserved1(&self) -> RESERVED1R

Bits 1:7 - 7:1] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn test_en(&self) -> TEST_ENR

Bit 0 - 0:0] The test enable bit 0: Enable external reset 1: Disables the generation of an external reset. Instead bit 1 of the INT_CAUS register is set and an interrupt is generated