Struct cc13x2_cc26x2_hal::ssi0::cr1::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn sod(&self) -> SODR

Bit 3 - 3:3] Slave-mode output disabled This bit is relevant only in the slave mode, MS=1. In multiple-slave systems, it is possible for an SSI master to broadcast a message to all slaves in the system while ensuring that only one slave drives data onto its serial output line. In such systems the RXD lines from multiple slaves could be tied together. To operate in such systems, this bitfield can be set if the SSI slave is not supposed to drive the TXD line: 0: SSI can drive the TXD output in slave mode. 1: SSI cannot drive the TXD output in slave mode.

pub fn ms(&self) -> MSR

Bit 2 - 2:2] Master or slave mode select. This bit can be modified only when SSI is disabled, SSE=0.

pub fn sse(&self) -> SSER

Bit 1 - 1:1] Synchronous serial interface enable.

pub fn lbm(&self) -> LBMR

Bit 0 - 0:0] Loop back mode: 0: Normal serial port operation enabled. 1: Output of transmit serial shifter is connected to input of receive serial shifter internally.