Struct cc13x2_cc26x2_hal::prcm::mcusramcfg::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn reserved6(&self) -> RESERVED6R

Bits 6:31 - 31:6] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn bm_off(&self) -> BM_OFFR

Bit 5 - 5:5] Burst Mode disable 0: Burst Mode enabled. 1: Burst Mode off.

pub fn page(&self) -> PAGER

Bit 4 - 4:4] Page Mode select 0: Page Mode disabled. Memory works in standard mode 1: Page Mode enabled. Only one half of butterfly array selected. Page Mode will select either LSB half or MSB half of the word based on PGS setting. This mode can be used for additional power saving

pub fn pgs(&self) -> PGSR

Bit 3 - 3:3] 0: Select LSB half of word during Page Mode, PAGE = 1 1: Select MSB half of word during Page Mode, PAGE = 1

pub fn bm(&self) -> BMR

Bit 2 - 2:2] Burst Mode Enable 0: Burst Mode Disable. Memory works in standard mode. 1: Burst Mode Enable When in Burst Mode bitline precharge and wordline firing depends on PCH_F and PCH_L. Burst Mode results in reduction in active power.

pub fn pch_f(&self) -> PCH_FR

Bit 1 - 1:1] 0: No bitline precharge in second half of cycle 1: Bitline precharge in second half of cycle when in Burst Mode, BM = 1

pub fn pch_l(&self) -> PCH_LR

Bit 0 - 0:0] 0: No bitline precharge in first half of cycle 1: Bitline precharge in first half of cycle when in Burst Mode, BM = 1