Struct cc13x2_cc26x2_hal::pka::seqctrl::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn reset(&self) -> RESETR

Bit 31 - 31:31] Option program ROM: Reset value = 0. Read/Write, reset value 0b (ZERO). Writing 1b resets the sequencer, write to 0b to restart operations again. As the reset value is 0b, the sequencer will automatically start operations executing from program ROM. This bit should always be written with zero and ignored when reading this register. Option Program RAM: Reset value =1. Read/Write, reset value 1b (ONE). When 1b, the sequencer is held in a reset state and the PKA_PROGRAM area is accessible for loading the sequencer program (while the PKA_DATA_RAM is inaccessible), write to 0b to (re)start sequencer operations and disable PKA_PROGRAM area accessibility (also enables the PKA_DATA_RAM accesses). Resetting the sequencer (in order to load other firmware) should only be done when the PKA Engine is not performing any operations (i.e. the FUNCTION.RUN bit should be zero).

pub fn reserved16(&self) -> RESERVED16R

Bits 16:30 - 30:16] Set to zero on write, ignore on read

pub fn sequencer_stat(&self) -> SEQUENCER_STATR

Bits 8:15 - 15:8] These read-only bits can be used by the sequencer to communicate status to the outside world. Bit [8] is also used as sequencer interrupt, with the complement of this bit ORed into the FUNCTION.RUN bit. This field should always be written with zeroes and ignored when reading this register.

pub fn sw_control_stat(&self) -> SW_CONTROL_STATR

Bits 0:7 - 7:0] These bits can be used by software to trigger sequencer operations. External logic can set these bits by writing 1b, cannot reset them by writing 0b. The sequencer can reset these bits by writing 0b, cannot set them by writing 1b. Setting the FUNCTION.RUN bit together with a nonzero sequencer operations field automatically sets bit [0] here. This field should always be written with zeroes and ignored when reading this register.