Struct cc13x2_cc26x2_hal::i2c0::mtpr::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn reserved8(&self) -> RESERVED8R

Bits 8:31 - 31:8] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn tpr_7(&self) -> TPR_7R

Bit 7 - 7:7] Must be set to 0 to set TPR. If set to 1, a write to TPR will be ignored.

pub fn tpr(&self) -> TPRR

Bits 0:6 - 6:0] SCL clock period This field specifies the period of the SCL clock. SCL_PRD = 2*(1+TPR)*(SCL_LP + SCL_HP)*CLK_PRD where: SCL_PRD is the SCL line period (I2C clock). TPR is the timer period register value (range of 1 to 127) SCL_LP is the SCL low period (fixed at 6). SCL_HP is the SCL high period (fixed at 4). CLK_PRD is the system clock period in ns.