Struct cc13x2_cc26x2_hal::crypto::keywrittenarea::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn reserved8(&self) -> RESERVED8R

Bits 8:31 - 31:8] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn ram_area_written7(&self) -> RAM_AREA_WRITTEN7R

Bit 7 - 7:7] On read this bit returns the key area written status. This bit can be reset by writing a 1. Note: This register will be reset on a soft reset initiated by writing to DMASWRESET.SWRES. After a soft reset, all keys must be rewritten to the key store memory.

pub fn ram_area_written6(&self) -> RAM_AREA_WRITTEN6R

Bit 6 - 6:6] On read this bit returns the key area written status. This bit can be reset by writing a 1. Note: This register will be reset on a soft reset initiated by writing to DMASWRESET.SWRES. After a soft reset, all keys must be rewritten to the key store memory.

pub fn ram_area_written5(&self) -> RAM_AREA_WRITTEN5R

Bit 5 - 5:5] On read this bit returns the key area written status. This bit can be reset by writing a 1. Note: This register will be reset on a soft reset initiated by writing to DMASWRESET.SWRES. After a soft reset, all keys must be rewritten to the key store memory.

pub fn ram_area_written4(&self) -> RAM_AREA_WRITTEN4R

Bit 4 - 4:4] On read this bit returns the key area written status. This bit can be reset by writing a 1. Note: This register will be reset on a soft reset initiated by writing to DMASWRESET.SWRES. After a soft reset, all keys must be rewritten to the key store memory.

pub fn ram_area_written3(&self) -> RAM_AREA_WRITTEN3R

Bit 3 - 3:3] On read this bit returns the key area written status. This bit can be reset by writing a 1. Note: This register will be reset on a soft reset initiated by writing to DMASWRESET.SWRES. After a soft reset, all keys must be rewritten to the key store memory.

pub fn ram_area_written2(&self) -> RAM_AREA_WRITTEN2R

Bit 2 - 2:2] On read this bit returns the key area written status. This bit can be reset by writing a 1. Note: This register will be reset on a soft reset initiated by writing to DMASWRESET.SWRES. After a soft reset, all keys must be rewritten to the key store memory.

pub fn ram_area_written1(&self) -> RAM_AREA_WRITTEN1R

Bit 1 - 1:1] On read this bit returns the key area written status. This bit can be reset by writing a 1. Note: This register will be reset on a soft reset initiated by writing to DMASWRESET.SWRES. After a soft reset, all keys must be rewritten to the key store memory.

pub fn ram_area_written0(&self) -> RAM_AREA_WRITTEN0R

Bit 0 - 0:0] On read this bit returns the key area written status. This bit can be reset by writing a 1. Note: This register will be reset on a soft reset initiated by writing to DMASWRESET.SWRES. After a soft reset, all keys must be rewritten to the key store memory.