Struct cc13x2_cc26x2_hal::crypto::dmach0ctl::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn reserved2(&self) -> RESERVED2R

Bits 2:31 - 31:2] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn prio(&self) -> PRIOR

Bit 1 - 1:1] Channel priority 0: Low 1: High If both channels have the same priority, access of the channels to the external port is arbitrated using the round robin scheme. If one channel has a high priority and another one low, the channel with the high priority is served first, in case of simultaneous access requests.

pub fn en(&self) -> ENR

Bit 0 - 0:0] Channel enable 0: Disabled 1: Enable Note: Disabling an active channel interrupts the DMA operation. The ongoing block transfer completes, but no new transfers are requested.