Struct cc13x2_cc26x2_hal::cpu_scs::dfsr::W

pub struct W { /* fields omitted */ }

Value to write to the register

Methods

impl W

pub fn reset_value() -> W

Reset value of the register

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register

pub fn reserved5(&mut self) -> _RESERVED5W

Bits 5:31 - 31:5] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn external(&mut self) -> _EXTERNALW

Bit 4 - 4:4] External debug request flag. The processor stops on next instruction boundary. 0x0: External debug request signal not asserted 0x1: External debug request signal asserted

pub fn vcatch(&mut self) -> _VCATCHW

Bit 3 - 3:3] Vector catch flag. When this flag is set, a flag in one of the local fault status registers is also set to indicate the type of fault. 0x0: No vector catch occurred 0x1: Vector catch occurred

pub fn dwttrap(&mut self) -> _DWTTRAPW

Bit 2 - 2:2] Data Watchpoint and Trace (DWT) flag. The processor stops at the current instruction or at the next instruction. 0x0: No DWT match 0x1: DWT match

pub fn bkpt(&mut self) -> _BKPTW

Bit 1 - 1:1] BKPT flag. The BKPT flag is set by a BKPT instruction in flash patch code, and also by normal code. Return PC points to breakpoint containing instruction. 0x0: No BKPT instruction execution 0x1: BKPT instruction execution

pub fn halted(&mut self) -> _HALTEDW

Bit 0 - 0:0] Halt request flag. The processor is halted on the next instruction. 0x0: No halt request 0x1: Halt requested by NVIC, including step