Struct cc13x2_cc26x2_hal::aon_pmctl::rechargestat::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn reserved20(&self) -> RESERVED20R

Bits 20:31 - 31:20] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn vddr_smpls(&self) -> VDDR_SMPLSR

Bits 16:19 - 19:16] The last 4 VDDR samples. For each bit: 0: VDDR was below VDDR_OK threshold when recharge started 1: VDDR was above VDDR_OK threshold when recharge started The register is updated prior to every recharge period with a shift left, and bit 0 is updated with the last VDDR sample.

pub fn max_used_per(&self) -> MAX_USED_PERR

Bits 0:15 - 15:0] Shows the maximum number of 32kHz periods that have separated two recharge cycles and VDDR still was above VDDR_OK threshold when the latter recharge started. This register can be used as an indication of the leakage current during standby. This bitfield is cleared to 0 when writing this register.