[−][src]Struct cc13x2_cc26x2_hal::aon_rtc::chctl::W
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
Writes raw bits to the register
pub fn reserved19(&mut self) -> _RESERVED19W
[src]
Bits 19:31 - 31:19] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.
pub fn ch2_cont_en(&mut self) -> _CH2_CONT_ENW
[src]
Bit 18 - 18:18] Set to enable continuous operation of Channel 2
pub fn reserved17(&mut self) -> _RESERVED17W
[src]
Bit 17 - 17:17] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.
pub fn ch2_en(&mut self) -> _CH2_ENW
[src]
Bit 16 - 16:16] RTC Channel 2 Enable 0: Disable RTC Channel 2 1: Enable RTC Channel 2
pub fn reserved10(&mut self) -> _RESERVED10W
[src]
Bits 10:15 - 15:10] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.
pub fn ch1_capt_en(&mut self) -> _CH1_CAPT_ENW
[src]
Bit 9 - 9:9] Set Channel 1 mode 0: Compare mode (default) 1: Capture mode
pub fn ch1_en(&mut self) -> _CH1_ENW
[src]
Bit 8 - 8:8] RTC Channel 1 Enable 0: Disable RTC Channel 1 1: Enable RTC Channel 1
pub fn reserved1(&mut self) -> _RESERVED1W
[src]
Bits 1:7 - 7:1] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.
pub fn ch0_en(&mut self) -> _CH0_ENW
[src]
Bit 0 - 0:0] RTC Channel 0 Enable 0: Disable RTC Channel 0 1: Enable RTC Channel 0
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self