[−][src]Struct cc13x2_cc26x2_hal::cpu_scs::actlr::W
Value to write to the register
Methods
impl W
[src]
pub fn reset_value() -> W
[src]
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
Writes raw bits to the register
pub fn reserved10(&mut self) -> _RESERVED10W
[src]
Bits 10:31 - 31:10] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.
pub fn disoofp(&mut self) -> _DISOOFPW
[src]
Bit 9 - 9:9] Disables floating point instructions completing out of order with respect to integer instructions.
pub fn disfpca(&mut self) -> _DISFPCAW
[src]
Bit 8 - 8:8] Disable automatic update of CONTROL.FPCA
pub fn reserved3(&mut self) -> _RESERVED3W
[src]
Bits 3:7 - 7:3] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.
pub fn disfold(&mut self) -> _DISFOLDW
[src]
Bit 2 - 2:2] Disables folding of IT instruction.
pub fn disdefwbuf(&mut self) -> _DISDEFWBUFW
[src]
Bit 1 - 1:1] Disables write buffer use during default memory map accesses. This causes all bus faults to be precise bus faults but decreases the performance of the processor because the stores to memory have to complete before the next instruction can be executed.
pub fn dismcycint(&mut self) -> _DISMCYCINTW
[src]
Bit 0 - 0:0] Disables interruption of multi-cycle instructions. This increases the interrupt latency of the processor becuase LDM/STM completes before interrupt stacking occurs.
Auto Trait Implementations
Blanket Implementations
impl<T> From for T
[src]
impl<T, U> TryFrom for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T, U> Into for T where
U: From<T>,
[src]
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same for T
type Output = T
Should always be Self