Struct cc13x2_cc26x2_hal::uart0::icr::W

pub struct W { /* fields omitted */ }

Value to write to the register

Methods

impl W

pub fn reset_value() -> W

Reset value of the register

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register

pub fn reserved12(&mut self) -> _RESERVED12W

Bits 12:31 - 31:12] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn eotic(&mut self) -> _EOTICW

Bit 11 - 11:11] End of Transmission interrupt clear: Writing 1 to this field clears the overrun error interrupt (RIS.EOTRIS). Writing 0 has no effect.

pub fn oeic(&mut self) -> _OEICW

Bit 10 - 10:10] Overrun error interrupt clear: Writing 1 to this field clears the overrun error interrupt (RIS.OERIS). Writing 0 has no effect.

pub fn beic(&mut self) -> _BEICW

Bit 9 - 9:9] Break error interrupt clear: Writing 1 to this field clears the break error interrupt (RIS.BERIS). Writing 0 has no effect.

pub fn peic(&mut self) -> _PEICW

Bit 8 - 8:8] Parity error interrupt clear: Writing 1 to this field clears the parity error interrupt (RIS.PERIS). Writing 0 has no effect.

pub fn feic(&mut self) -> _FEICW

Bit 7 - 7:7] Framing error interrupt clear: Writing 1 to this field clears the framing error interrupt (RIS.FERIS). Writing 0 has no effect.

pub fn rtic(&mut self) -> _RTICW

Bit 6 - 6:6] Receive timeout interrupt clear: Writing 1 to this field clears the receive timeout interrupt (RIS.RTRIS). Writing 0 has no effect.

pub fn txic(&mut self) -> _TXICW

Bit 5 - 5:5] Transmit interrupt clear: Writing 1 to this field clears the transmit interrupt (RIS.TXRIS). Writing 0 has no effect.

pub fn rxic(&mut self) -> _RXICW

Bit 4 - 4:4] Receive interrupt clear: Writing 1 to this field clears the receive interrupt (RIS.RXRIS). Writing 0 has no effect.

pub fn reserved2(&mut self) -> _RESERVED2W

Bits 2:3 - 3:2] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. Write 0

pub fn ctsmic(&mut self) -> _CTSMICW

Bit 1 - 1:1] Clear to Send (CTS) modem interrupt clear: Writing 1 to this field clears the clear to send interrupt (RIS.CTSRMIS). Writing 0 has no effect.

pub fn reserved0(&mut self) -> _RESERVED0W

Bit 0 - 0:0] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior. Write 0.