Struct cc13x2_cc26x2_hal::ccfg::mode_conf_1::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn alt_dcdc_vmin(&self) -> ALT_DCDC_VMINR

Bits 20:23 - 23:20] Minimum voltage for when DC/DC should be used if alternate DC/DC setting is enabled (SIZE_AND_DIS_FLAGS.DIS_ALT_DCDC_SETTING=0). Voltage = (28 + ALT_DCDC_VMIN) / 16. 0: 1.75V 1: 1.8125V ... 14: 2.625V 15: 2.6875V NOTE! The DriverLib function SysCtrl_DCDC_VoltageConditionalControl() must be called regularly to apply this field (handled automatically if using TI RTOS!).

pub fn alt_dcdc_dither_en(&self) -> ALT_DCDC_DITHER_ENR

Bit 19 - 19:19] Enable DC/DC dithering if alternate DC/DC setting is enabled (SIZE_AND_DIS_FLAGS.DIS_ALT_DCDC_SETTING=0). 0: Dither disable 1: Dither enable

pub fn alt_dcdc_ipeak(&self) -> ALT_DCDC_IPEAKR

Bits 16:18 - 18:16] Inductor peak current if alternate DC/DC setting is enabled (SIZE_AND_DIS_FLAGS.DIS_ALT_DCDC_SETTING=0). Assuming 10uH external inductor! Peak current = 31 + ( 4 * ALT_DCDC_IPEAK ) : 0: 31mA (min) ... 4: 47mA ... 7: 59mA (max)

pub fn delta_ibias_init(&self) -> DELTA_IBIAS_INITR

Bits 12:15 - 15:12] Signed delta value for IBIAS_INIT. Delta value only applies if SIZE_AND_DIS_FLAGS.DIS_XOSC_OVR=0. See FCFG1:AMPCOMP_CTRL1.IBIAS_INIT

pub fn delta_ibias_offset(&self) -> DELTA_IBIAS_OFFSETR

Bits 8:11 - 11:8] Signed delta value for IBIAS_OFFSET. Delta value only applies if SIZE_AND_DIS_FLAGS.DIS_XOSC_OVR=0. See FCFG1:AMPCOMP_CTRL1.IBIAS_OFFSET

pub fn xosc_max_start(&self) -> XOSC_MAX_STARTR

Bits 0:7 - 7:0] Unsigned value of maximum XOSC startup time (worst case) in units of 100us. Value only applies if SIZE_AND_DIS_FLAGS.DIS_XOSC_OVR=0.