Struct cc13x2_cc26x2_hal::aux_timer01::t1cfg::R

pub struct R { /* fields omitted */ }

Value read from the register

Methods

impl R

pub fn bits(&self) -> u32

Value of the register as raw bits

pub fn reserved15(&self) -> RESERVED15R

Bits 15:31 - 31:15] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn tick_src_pol(&self) -> TICK_SRC_POLR

Bit 14 - 14:14] Tick source polarity for Timer 1.

pub fn tick_src(&self) -> TICK_SRCR

Bits 8:13 - 13:8] Select Timer 1 tick source from the synchronous event bus.

pub fn pre(&self) -> PRER

Bits 4:7 - 7:4] Prescaler division ratio is 2^PRE: 0x0: Divide by 1. 0x1: Divide by 2. 0x2: Divide by 4. ... 0xF: Divide by 32,768.

pub fn reserved2(&self) -> RESERVED2R

Bits 2:3 - 3:2] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn mode(&self) -> MODER

Bit 1 - 1:1] Timer 1 mode. Configure source for Timer 1 prescaler.

pub fn reload(&self) -> RELOADR

Bit 0 - 0:0] Timer 1 reload mode.