Struct cc13x2_cc26x2_hal::aux_anaif::adcfifostat::W

pub struct W { /* fields omitted */ }

Value to write to the register

Methods

impl W

pub fn reset_value() -> W

Reset value of the register

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register

pub fn reserved5(&mut self) -> _RESERVED5W

Bits 5:31 - 31:5] Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior.

pub fn overflow(&mut self) -> _OVERFLOWW

Bit 4 - 4:4] FIFO overflow flag. 0: FIFO has not overflowed. 1: FIFO has overflowed, this flag is sticky until you flush the FIFO. When the flag is set, the ADC FIFO write pointer is static. It is not possible to add more samples to the ADC FIFO. Flush FIFO to clear the flag.

pub fn underflow(&mut self) -> _UNDERFLOWW

Bit 3 - 3:3] FIFO underflow flag. 0: FIFO has not underflowed. 1: FIFO has underflowed, this flag is sticky until you flush the FIFO. When the flag is set, the ADC FIFO read pointer is static. Read returns the previous sample that was read. Flush FIFO to clear the flag.

pub fn full(&mut self) -> _FULLW

Bit 2 - 2:2] FIFO full flag. 0: FIFO is not full, there is less than 4 samples in the FIFO. 1: FIFO is full, there are 4 samples in the FIFO. When the flag is set, it is not possible to add more samples to the ADC FIFO. An attempt to add samples sets the OVERFLOW flag.

pub fn almost_full(&mut self) -> _ALMOST_FULLW

Bit 1 - 1:1] FIFO almost full flag. 0: There are less than 3 samples in the FIFO, or the FIFO is full. The FULL flag is also asserted in the latter case. 1: There are 3 samples in the FIFO, there is room for one more sample.

pub fn empty(&mut self) -> _EMPTYW

Bit 0 - 0:0] FIFO empty flag. 0: FIFO contains one or more samples. 1: FIFO is empty. When the flag is set, read returns the previous sample that was read and sets the UNDERFLOW flag.